+ Post new Ad
Vintage Brown & Sharpe 750B V-Block and Clamp Set - Matched Pair - Excellent, US $86 – Picture 0
Vintage Brown & Sharpe 750B V-Block and Clamp Set - Matched Pair - Excellent, US $86 – Picture 0

Vintage Brown & Sharpe 750b V-block And Clamp Set - Matched Pair - Excellent

US $86

  • Brecksville, Ohio, United States
  • Nov 21st
Open on mobile:
QR code
This is for a vintage Brown & Sharpe No. 750-B matched pair of V-blocks with two clamps from a local estate. Each block is 2-3/4" wide x 2-1/2" deep x 2" high. I took a lot of pictures so you could see their condition, sizes, and markings so please look at them closely. The blocks and clamps have some wear from use, some staining/spotting from storage, and the blocks have a name etched on the bottom (see pictures), but overall it's all in excellent condition. Vintage Brown & Sharpe 750B V-Block and Clamp Set - Matched Pair - Excellent Description This is for a vintage Brown & Sharpe No. 750-B matched pair of V-blocks with two clamps from a local estate.  Each block is 2-3/4" wide x 2-1/2" deep x 2" high.  I took a lot of pictures so you could see their condition, sizes, and markings so please look at them closely.  The blocks and clamps have some wear from use, some staining/spotting from storage, and the blocks have a name etched on the bottom (see pictures), but overall it's all in excellent condition. If you have any questions, just ask.  Thanks for looking and God Bless! Winning Ohio bidders are responsible for a 8.0% Ohio Sales Tax. International auction winners are responsible for knowig and paying any applicable duty. View My Feedback, View My Other Items For Sale, Visit My eBay Store, Add me to your Favorite Sellers   Get Images that Make Supersized Seem Small. Auctiva's Listing Templates improve your auctions in minutes. Attention Sellers - Get Templates Image Hosting, Scheduling at Auctiva.com.

Directions

Similar products from Supporting Blocks & Sets

Single Pcs Spi Cast Iron V-Block 6" Long Ground 90 Degree

Single Pcs Spi Cast Iron V-Block 6" Long Ground 90 Degree

  • Fremont, California, United States
  • May 19th
Pair of Brown & Sharpe Small V Block, #750A, USA

Pair of Brown & Sharpe Small V Block, #750A, USA

  • Huntington Station, New York, United States
  • May 16th
Preamer AP25 Adjustable Micro Angle Gauge High Precision Angle V Block 0-60° for

Preamer AP25 Adjustable Micro Angle Gauge High Precision Angle V Block 0-60° for

  • US, United States
  • May 16th
Tube Beading Tool Kit with Vise V-Block, 1/4" to 1"

Tube Beading Tool Kit with Vise V-Block, 1/4" to 1"

  • Orange, California, United States
  • May 13th
SPI Super Wee Block Set 30-610-0 For Larger V-Blocks Holding Tool

SPI Super Wee Block Set 30-610-0 For Larger V-Blocks Holding Tool

  • Saint Louis, Missouri, United States
  • May 13th
ADJUSTABLE VEE BLOCK, 2-1/4" CAPACITY

ADJUSTABLE VEE BLOCK, 2-1/4" CAPACITY

  • North Springfield, Vermont, United States
  • May 13th
Machinist Tools , V - Block with Clamp , V Block

Machinist Tools , V - Block with Clamp , V Block

  • Troy, Ohio, United States
  • Nov 26th
Broset Precision Stop Block / Cut-To-Length Gauge Fits Many Saw Fences W1109 New

Broset Precision Stop Block / Cut-To-Length Gauge Fits Many Saw Fences W1109 New

  • Jacksonville, Florida, United States
  • Nov 23rd
MACHINIST MADE PARALLEL LOT , 8 PAIRS AND 12 SINGLES

MACHINIST MADE PARALLEL LOT , 8 PAIRS AND 12 SINGLES

  • Batavia, Illinois, United States
  • Nov 22nd
machinest gunsmithing parallels 7"x1/2"x1"

machinest gunsmithing parallels 7"x1/2"x1"

  • Batavia, Illinois, United States
  • Nov 21st
machinist toolmaker milling grinding set up of v blocks with clamps read

machinist toolmaker milling grinding set up of v blocks with clamps read

  • Hadley, Pennsylvania, United States
  • Nov 21st
Starrett #384 Parallel Set

Starrett #384 Parallel Set

  • North Andover, Massachusetts, United States
  • Nov 21st
USED ISCAR TOOL BLOCK FOR HEAVY-DUTY PARTING GROOVING BLADE SGTBK 38-9

USED ISCAR TOOL BLOCK FOR HEAVY-DUTY PARTING GROOVING BLADE SGTBK 38-9

  • Fairfield, Iowa, United States
  • Nov 21st
Large Precision Vee Block

Large Precision Vee Block

  • Greenwood, South Carolina, United States
  • Nov 21st
Universal angle heavy duty cap

Universal angle heavy duty cap

  • San Angelo, Texas, United States
  • Nov 21st
"P.R." Tools, Bench Block Machinist Tool Punch Pin Milling Lathe Metal

"P.R." Tools, Bench Block Machinist Tool Punch Pin Milling Lathe Metal

  • Stoutsville, Ohio, United States
  • Nov 21st
Lot 10 Vintage HK T.N. MACHINIST BLOCKS Toolmaker Inspection Workholding Tools

Lot 10 Vintage HK T.N. MACHINIST BLOCKS Toolmaker Inspection Workholding Tools

  • Newark, Ohio, United States
  • Nov 21st
4-7/8" x 3-1/2" x 3-1/2" V Block Ground and Hardened PPSC 11lbs

4-7/8" x 3-1/2" x 3-1/2" V Block Ground and Hardened PPSC 11lbs

  • Fairfax, Vermont, United States
  • Nov 20th
Magnetic parallels

Magnetic parallels

  • Cudahy, Wisconsin, United States
  • Nov 20th
Starrett #278 Pair V Blocks & Clamps Matched Set 1/4-20NC

Starrett #278 Pair V Blocks & Clamps Matched Set 1/4-20NC

  • Waterbury, Connecticut, United States
  • Nov 20th

People who viewed this item also vieved

ROYAL CNC Spindle Type Live Center - Point Length : 1-7/8" Morse Taper: 3 MT

ROYAL CNC Spindle Type Live Center - Point Length : 1-7/8" Morse Taper: 3 MT

  • Flushing, New York, United States
  • Jan 30th
MT3 Morse Taper #3 Universal Live Center Set Centers

MT3 Morse Taper #3 Universal Live Center Set Centers

  • San Gabriel, California, United States
  • Jan 30th
NEW 4 Lathe Dead Centers HSS Carbide Tip Morse MT 2 and 3 for Atlas or Southbend

NEW 4 Lathe Dead Centers HSS Carbide Tip Morse MT 2 and 3 for Atlas or Southbend

  • Harvard, Massachusetts, United States
  • Jan 30th
3 Jaw Self Centering Lathe Chuck 4" K11-100 2" Body Th 4200 RPM .002" Acc |LI4|

3 Jaw Self Centering Lathe Chuck 4" K11-100 2" Body Th 4200 RPM .002" Acc |LI4|

  • Saint Louis, Missouri, United States
  • Jan 30th
SMW Autoblok SP 240-78 Series Self contained power chuck with large through hole

SMW Autoblok SP 240-78 Series Self contained power chuck with large through hole

  • Tulsa, Oklahoma, United States
  • Jan 30th
Lathe Chuck Back Plate/Adapter L-00 for 6 Inch Chuck

Lathe Chuck Back Plate/Adapter L-00 for 6 Inch Chuck

  • Chino, California, United States
  • Jan 30th
(2) Heavy Duty C Clamps, Armstrong No. "0" Drop Forged USA- Super Nice Vintage!

(2) Heavy Duty C Clamps, Armstrong No. "0" Drop Forged USA- Super Nice Vintage!

  • Jackson, Tennessee, United States
  • Jan 30th
MACHINIST LOT - DE-STA-CO WORKHOLDING CLAMPS - MIXED LOT OF 16 ALL NEW

MACHINIST LOT - DE-STA-CO WORKHOLDING CLAMPS - MIXED LOT OF 16 ALL NEW

  • Orlando, Florida, United States
  • Jan 30th
GERMANY! (2) BESSEY 18" BAR CLAMPS

GERMANY! (2) BESSEY 18" BAR CLAMPS

  • Chino, California, United States
  • Jan 30th
CNC Er Collet Chuck

CNC Er Collet Chuck

  • Princeton, West Virginia, United States
  • Jan 30th
CAT 40 ER32-0.75" Collet Chuck by GS Tooling

CAT 40 ER32-0.75" Collet Chuck by GS Tooling

  • Princeton, West Virginia, United States
  • Jan 30th
5C Bison Lathe Collet Chuck + "Set Tru" PLAIN BACK

5C Bison Lathe Collet Chuck + "Set Tru" PLAIN BACK

  • Columbus, Ohio, United States
  • Jan 30th
Hardinge 20C Emergency Collet

Hardinge 20C Emergency Collet

  • Addison, Illinois, United States
  • Jan 30th
LOT OF 5 ACURA-TAP COLLETS - 3/8" - 9/16" - 5/8" - 3/4" - 7/8" - TAPPING HEAD

LOT OF 5 ACURA-TAP COLLETS - 3/8" - 9/16" - 5/8" - 3/4" - 7/8" - TAPPING HEAD

  • Chino, California, United States
  • Jan 30th
LOT OF 4 HARDINGE 16C COLLETS EMERGENCY & HEXAGON

LOT OF 4 HARDINGE 16C COLLETS EMERGENCY & HEXAGON

  • Ellington, New York, United States
  • Jan 30th
6" x 6-3/4" x 8" Fabricated Steel, Angle Plate, Machined, Protected surface, NEW

6" x 6-3/4" x 8" Fabricated Steel, Angle Plate, Machined, Protected surface, NEW

  • Grand Rapids, Michigan, United States
  • Jan 30th
5" x 6-3/4" x 8" Fabricated Steel, Angle Plate, Machined, Protected surface, NEW

5" x 6-3/4" x 8" Fabricated Steel, Angle Plate, Machined, Protected surface, NEW

  • Grand Rapids, Michigan, United States
  • Jan 30th
10-3/4" FACE PLATE FACEPLATE 2" X 8 TPI THREAD MOUNT FOR LATHE 10.75"

10-3/4" FACE PLATE FACEPLATE 2" X 8 TPI THREAD MOUNT FOR LATHE 10.75"

  • San Diego, California, United States
  • Jan 30th
DACO D21SQK Lathe Jaw Master Keys 2 Pcs Per Lot

DACO D21SQK Lathe Jaw Master Keys 2 Pcs Per Lot

  • Middlebury, Indiana, United States
  • Jan 30th
Fanuc Robotics MD-4467-600-010 Big Pin

Fanuc Robotics MD-4467-600-010 Big Pin

  • Peoria, Illinois, United States
  • Jan 30th
ENERPAC SLLS-51 SWING CLAMP

ENERPAC SLLS-51 SWING CLAMP

  • Guelph, Ontario, Canada
  • Jan 30th
HAAS TWO AXIS CONTROL BOX 4TH 5TH CNC MILL ROTARY TABLE INDEXER HRT 210 HA5C RED

HAAS TWO AXIS CONTROL BOX 4TH 5TH CNC MILL ROTARY TABLE INDEXER HRT 210 HA5C RED

  • Santa Clarita, California, United States
  • Jan 30th
Dividing Head - 3"

Dividing Head - 3"

  • Duluth, Georgia, United States
  • Jan 30th
4" /100 mm Tilting Rotary Table with 65mm Lathe Chuck for Milling Machine

4" /100 mm Tilting Rotary Table with 65mm Lathe Chuck for Milling Machine

  • Delhi, DELHI, India
  • Jan 30th
KURT SWIVEL BASE D60-4-SA FOR 6" MILLING VISE STK1337

KURT SWIVEL BASE D60-4-SA FOR 6" MILLING VISE STK1337

  • Wadley, Alabama, United States
  • Jan 30th
KURT SWIVEL BASE D60-4-SA FOR 6" MILLING VISE STK1336

KURT SWIVEL BASE D60-4-SA FOR 6" MILLING VISE STK1336

  • Wadley, Alabama, United States
  • Jan 30th
KURT SWIVEL BASE D60-4-SA FOR 6" MILLING VISE STK1335

KURT SWIVEL BASE D60-4-SA FOR 6" MILLING VISE STK1335

  • Wadley, Alabama, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies