+ Post new Ad
Vintage Dunlap Hand-Held Press Punch Cast Iron, US $440 – Picture 0
Vintage Dunlap Hand-Held Press Punch Cast Iron, US $440 – Picture 1
Vintage Dunlap Hand-Held Press Punch Cast Iron, US $440 – Picture 2
Vintage Dunlap Hand-Held Press Punch Cast Iron, US $440 – Picture 0
Vintage Dunlap Hand-Held Press Punch Cast Iron, US $440 – Picture 1
Vintage Dunlap Hand-Held Press Punch Cast Iron, US $440 – Picture 2

Vintage Dunlap Hand-held Press Punch Cast Iron

US $440

  • Bristol, New Hampshire, United States
  • Jun 9th
Open on mobile:
QR code
Here's a nice heavy duty press punch made by Dunlap. There is no model number or hints at it's age on the tool itself, but it certainly isn't very modern. It measures a total of 7" long, with a squeeze-handle that activates the rear punch. There is also an adjustible rod in front of the punch rod, which I assume is used for holding things in place, and a twistable dial with numbers surrounding it on the top. I'm not certain what it's purpose is. The spring works as it should, and nothing's broken or missing. Some light rust spots are present here and there, and there's a small hole above the "DUNLAP" stamping; I'm uncertain if this was done by a previous owner, or it was made to have the hole.  ____________________________________________________________________ NO RESERVE Please make sure you contact me if you have any questions. If you are the winning bidder and in the rare event there is an issue, PLEASE contact me before leaving any feedback and I WILL work things out to make sure you are 100% satisfied. I  COMBINE SHIPPING! If you purchase multiple items from me, please wait for an invoice to arrive. If you intend on purchasing multiple items from me that have different auction end dates, sending me a message to let me know would be very much appreciated. All items will generally be shipped from 1-2 days after payment is recieved.  I only accept Paypal. Payment must be made within 4 days of the purchase unless I am contacted by the buyer. If no payment is received and no contact made, the item will likely be relisted. Thanks for Looking!
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Dunlap

Directions

Similar products from Punch Tool Sets & Dies

Used Rethreading Die | 1-1/2"-12 Left Hand | Round with Handle

Used Rethreading Die | 1-1/2"-12 Left Hand | Round with Handle

  • Milwaukee, Wisconsin, United States
  • Jun 9th
LOT OF 8 HSS LH & RH SQUARE DIES 1/2" TO 1-1/2" NPT NYE BAYSTATE GTD

LOT OF 8 HSS LH & RH SQUARE DIES 1/2" TO 1-1/2" NPT NYE BAYSTATE GTD

  • Ellington, New York, United States
  • Jun 9th
1/2-28 RH Barrel Threading #5 1.5" OD Round Die - Gunsmithing - MADE IN POLAND

1/2-28 RH Barrel Threading #5 1.5" OD Round Die - Gunsmithing - MADE IN POLAND

  • Paw Creek, North Carolina, United States
  • Jun 9th
M22 x 0.75 RH Shotgun Muzzle Threading HSS Die - Gunsmithing - MADE IN POLAND

M22 x 0.75 RH Shotgun Muzzle Threading HSS Die - Gunsmithing - MADE IN POLAND

  • Paw Creek, North Carolina, United States
  • Jun 9th
sears roebuck & co machine cut steel letters size 3/16 vintage

sears roebuck & co machine cut steel letters size 3/16 vintage

  • Dania, Florida, United States
  • Jun 9th
MACHINIST LATHE MILL Machinist Starrett Punches in Case Punch

MACHINIST LATHE MILL Machinist Starrett Punches in Case Punch

  • Morris Plains, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Precision Punch and Die Set in Box

MACHINIST TOOLS LATHE MILL Precision Punch and Die Set in Box

  • Morris Plains, New Jersey, United States
  • Jun 9th
Young Bros. 36 Piece, 3/16 Inch Character Steel Stamp Letters Numbers

Young Bros. 36 Piece, 3/16 Inch Character Steel Stamp Letters Numbers

  • Saint Peters, Missouri, United States
  • Jun 9th
Mix 25 Drift Center Transfer Punch Lot Machinist Gunsmith Tools Rifle Gun Parts

Mix 25 Drift Center Transfer Punch Lot Machinist Gunsmith Tools Rifle Gun Parts

  • Supply, North Carolina, United States
  • Jun 9th
Lot of 3 Knockout Punches Various Brands See Description

Lot of 3 Knockout Punches Various Brands See Description

  • Jacksonville, Florida, United States
  • Jun 9th
1" CAP DIE HOLDERS + ASSORTED DIES

1" CAP DIE HOLDERS + ASSORTED DIES

  • El Monte, California, United States
  • Jun 9th
Starrett No. 18-B Center Punch Metal

Starrett No. 18-B Center Punch Metal

  • Bow, New Hampshire, United States
  • Jun 9th
VINTAGE ANTIQUE STEEL METAL STAMP PUNCH OF BIG STAR - 3/4 INCH

VINTAGE ANTIQUE STEEL METAL STAMP PUNCH OF BIG STAR - 3/4 INCH

  • Brunswick, Maine, United States
  • Jun 9th
Blind Hole Punch Set

Blind Hole Punch Set

  • Holland, Michigan, United States
  • Jun 9th
New!! USA GTD 2-1/2 OD Die Wrench 12" Handles

New!! USA GTD 2-1/2 OD Die Wrench 12" Handles

  • San Bernardino, California, United States
  • Jun 9th
new 14mm x 2 Metric Left hand Die M14 x 2.0mm Pitch

new 14mm x 2 Metric Left hand Die M14 x 2.0mm Pitch

  • china, China
  • Jun 9th
Circle Dog Pill press die mold for TDP-0/1.5 tablet press machine 8MM Puncher

Circle Dog Pill press die mold for TDP-0/1.5 tablet press machine 8MM Puncher

  • Wenzhou, China
  • Jun 9th
Roper Whitney No.5 JR Die .141 9/64" Machinist Fabricator Sheet Metal Punch

Roper Whitney No.5 JR Die .141 9/64" Machinist Fabricator Sheet Metal Punch

  • Yorktown, Virginia, United States
  • Jun 9th
Heavy Duty 3/8" Number Stamp Set USA (Greenfield Hanson?) Machinist Tool Box Fin

Heavy Duty 3/8" Number Stamp Set USA (Greenfield Hanson?) Machinist Tool Box Fin

  • Yorktown, Virginia, United States
  • Jun 9th
Roper Whitney No.5 JR Die .08 5/64" Machinist Fabricator Sheet Metal Punch

Roper Whitney No.5 JR Die .08 5/64" Machinist Fabricator Sheet Metal Punch

  • 23693, United States
  • Jun 9th

People who viewed this item also vieved

DuMont 3/16 C KeyWay Broach Standard Machinist Tool cutting 22207

DuMont 3/16 C KeyWay Broach Standard Machinist Tool cutting 22207

  • Buffalo, New York, United States
  • Jan 30th
Internal Rotary Key Way (Broaching Tool)

Internal Rotary Key Way (Broaching Tool)

  • Westerlo, New York, United States
  • Jan 30th
9 NEW VARDEX 3IR 14 NPTF THREADING CARBIDE INSERTS. GRADE: VK2 {D94}

9 NEW VARDEX 3IR 14 NPTF THREADING CARBIDE INSERTS. GRADE: VK2 {D94}

  • Mentor, Ohio, United States
  • Jan 30th
9 NEW KENNAMETAL CNGA 433T CERMET INSERTS. GRADE: KY2000. {D832}

9 NEW KENNAMETAL CNGA 433T CERMET INSERTS. GRADE: KY2000. {D832}

  • Mentor, Ohio, United States
  • Jan 30th
10PC DIAMOND RIFFLER FILE SET OVERALL LENGTH 5-1/2"

10PC DIAMOND RIFFLER FILE SET OVERALL LENGTH 5-1/2"

  • Columbus, Ohio, United States
  • Jan 30th
HH SMITH 2646 CERAMIC SPACERS (25 PCS)

HH SMITH 2646 CERAMIC SPACERS (25 PCS)

  • Cedar, Minnesota, United States
  • Jan 30th
Fastcut 2" dia 6 flute endmill

Fastcut 2" dia 6 flute endmill

  • West Richland, Washington, United States
  • Jan 30th
Keo HS 607 Keyway Cutter, Niagara Cutter B555 3/4 '' x 1/4'' Lot # 20

Keo HS 607 Keyway Cutter, Niagara Cutter B555 3/4 '' x 1/4'' Lot # 20

  • Janesville, Wisconsin, United States
  • Jan 30th
(#4197) Machinist Used 1-15/16” Interchangeable Pilot Straight Shank Counter Bor

(#4197) Machinist Used 1-15/16” Interchangeable Pilot Straight Shank Counter Bor

  • Warren, Michigan, United States
  • Jan 30th
(#4198) Machinist Used 1-13/16” Interchangeable Pilot Straight Shank Counter Bor

(#4198) Machinist Used 1-13/16” Interchangeable Pilot Straight Shank Counter Bor

  • Warren, Michigan, United States
  • Jan 30th
Hand Reamer 1-1/4 Stright Flute HSS USA

Hand Reamer 1-1/4 Stright Flute HSS USA

  • Milton Freewater, Oregon, United States
  • Jan 30th
Hand Reamer 1-3/32 Stright Flute HSS USA

Hand Reamer 1-3/32 Stright Flute HSS USA

  • Milton Freewater, Oregon, United States
  • Jan 30th
12"x 1 bushing tenryu rescue blade carbide tipped

12"x 1 bushing tenryu rescue blade carbide tipped

  • Syracuse, New York, United States
  • Jan 30th
Fersco Band saw blade, 14t, 6'8-1/2" x 1/2'

Fersco Band saw blade, 14t, 6'8-1/2" x 1/2'

  • Marietta, Ohio, United States
  • Jan 30th
5 Pcs/Set 1/2" Indexable Carbide Insert Turing Tool Bit, #2380-5082

5 Pcs/Set 1/2" Indexable Carbide Insert Turing Tool Bit, #2380-5082

  • TORONTO, ONTARIO, Canada
  • Jan 30th
10 Piece1/4", 1/4-28 Threaded Drill Bit Lot - New - USA Made

10 Piece1/4", 1/4-28 Threaded Drill Bit Lot - New - USA Made

  • San Antonio, Texas, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies