US $53
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “Reamer is in good condition but shaft has teeth marks from using a pair of vise grips or a pipe wrench to turn the reamer. Has been smoothed out but still may not work in chuck but can still be used by hand.” |
Directions
Similar products from Reamer Sets
(#4923) New Machinist American Made 12mm SF Chucking Reamer
(#4921) New Machinist American Made 12mm Chucking Reamer
(#4918) New Machinist American Made 16mm Chucking Reamer
(#4922) New Machinist American Made 12mm Chucking Reamer
LOT OF 3 HSS EXPANSION REAMERS 1-7/8" TO 2-1/8" MILLERSBURG CLEVELAND
LOT OF 29 HSS REAMERS 3/16" TO 3/8" WITH STRAIGHT SHANK MORSE BUTTERFIELD
LOT OF 8 HSS REAMERS 5/8" TO 1-1/16" WITH 2MT AND 3MT CLEVELAND
LOT OF 3 HSS NATIONAL SHELL REAMERS 1-3/4" TO 3" WITH TWO 5MT ARBORES
LOT OF 5 HSS SHELL REAMERS 11/16" TO 1-3/4" WITH 1" BORE AND TWO 3MT ARBORES
NICE LOT OF 14 HSS REAMERS 1/8" TO 3/8" BUTTERFIELD STANDARD
Vintage 5/8" hand reamer long shaft in good usable condition
CHAMPION Spiral Flute Taper Shank Model 982, 1-1/16"
LOT OF 7 HSS EXPANSION REAMERS 7/16" TO 1-3/4" CLEVELAND MORSE
INTERSTATE CHUCKING REAMER SS DEC RMR ST FL 0.7650 HSS NEW MACHINIST TOOLS
(#4850) Used Machinist USA Made 15/32 – 17/32 Inch Adjustable Blade Reamer
(#4911) Used Machinist No.1 USA Made Straight Flute Morse Taper Finish Reamer
(#4906) Used Machinist .751 Inch Straight Shank Shop Made Stubby Reamer
(#4894) Used Machinist PF 12.5mm Chucking Reamer
(#4907) Used Machinist 15/16 Inch Straight Shank Shop Made Stubby Reamer
(#4902) Used Machinist .740 Inch Straight Shank Chucking Reamer
People who viewed this item also vieved
30pcs NEW WALTER P29475-04-0 CARBIDE INSERTS, GRADE: WTL74
Hertel Hqc40sm100131 Shell Mill Holder 40nmtb 1" Pilot (AL 9)
slitting / slotting saw mill cutter disc hss 100x10mm 32mm keyway shank
Tube & Pipe Notcher 60 Degree Notch Up To 2-1/8" Tubing & 9pc Bi Hole Saw Kit U5
NEW 1/4x 3/4 x 2-1/2" HANITA VARIMILL 4 FL CARBIDE BULL ENDMILL
Bran New HANITA Carbide Varimill End Mill 5/8" 4FL TiAlN 5/8" x 1-1/4 x 3-1/2"
Bolton Tools 2" Manual Pipe Notcher RA3
Coin Ring Center Punch kit 39mm. Hollow ground & relief. Choose 1/2, 7/16, 3/8
RNG 43 CCT CARBOUNDUM Ceramic Inserts (10pcs) New&Original
SPG 422T00320 KS8000 KYOCERA Ceramic Inserts (10pcs) New&Original
2 NOS GLOBUS Poland HSS SLITTING SAWS 2-1/4" Dia. x .072" x 5/8" 60T #WR13bE3B
TWO NEW LENOX BAND SAW BLADES 7' 9" x 3/4" CLASSIC (REG) Made in USA
Hougen 11075 RotaCut Sheet Metal Hole Cutter Kit
Hougen 17118 9/16" x 3/4" Rotaloc Annular Cutter
LOT OF 5 SOLID CARBIDE PRECISION BORING BARS INTERNAL TOOL
milwaukee one piece steel hawg 13/16 carbide tip 49-57-8081
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies