+ Post new Ad
Vintage No. 392 Brown and Sharpe V Blocks/clamps pairs, US $280 – Picture 0
Vintage No. 392 Brown and Sharpe V Blocks/clamps pairs, US $280 – Picture 0

Vintage No. 392 Brown And Sharpe V Blocks/clamps Pairs

US $280

  • Gap, Pennsylvania, United States
  • Mar 27th
Open on mobile:
QR code
Vintage No. 392 Brown and Sharpe V Blocks/clamps  pairs  1-5/8" X 1-1/4" Note: Buying as is: Please check out our photographs to see more detail on any damage, etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer them accurately.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Brown & Sharpe
Brand Brown & Sharpe
Country/Region of Manufacture United States
Model 599-750-1

Directions

Similar products from Supporting Blocks & Sets

GREAT GENERAL NO. 435-B 24 PC. RADIUS GAGE SET W/CASE ~ 1/32" TO 1/2" USA L@@K

GREAT GENERAL NO. 435-B 24 PC. RADIUS GAGE SET W/CASE ~ 1/32" TO 1/2" USA L@@K

  • Petersburg, Ohio, United States
  • Mar 28th
MACHINIST LATHE MILL 2 Heavy Parallel Hold Down Blocks GEORGE SCHERR CO. INC NY

MACHINIST LATHE MILL 2 Heavy Parallel Hold Down Blocks GEORGE SCHERR CO. INC NY

  • Tannersville, Pennsylvania, United States
  • Mar 28th
MACHINIST'S STARRETT #568 UNIVERSAL V BLOCK WITH CLAMP **EXCELLENT CONDITION**

MACHINIST'S STARRETT #568 UNIVERSAL V BLOCK WITH CLAMP **EXCELLENT CONDITION**

  • Golden Valley, Arizona, United States
  • Mar 28th
MACHINIST'S BROWN & SHARPE #599- 752 TOOLMAKER'S VISE CLAMP

MACHINIST'S BROWN & SHARPE #599- 752 TOOLMAKER'S VISE CLAMP

  • Golden Valley, Arizona, United States
  • Mar 28th
Precision parallels machinist set

Precision parallels machinist set

  • Hartstown, Pennsylvania, United States
  • Mar 28th
STARRETT ADJUSTABLE PARALELLS 6 PIECE SET

STARRETT ADJUSTABLE PARALELLS 6 PIECE SET

  • Duluth, Minnesota, United States
  • Mar 28th
Precision Ground Magnetic Parallels and V-blocks for Surface Grinder

Precision Ground Magnetic Parallels and V-blocks for Surface Grinder

  • Schererville, Indiana, United States
  • Mar 28th
Brown & Sharpe Parallels 6" x 1/2" x 1" Machinist Aviation Aircraft AV42

Brown & Sharpe Parallels 6" x 1/2" x 1" Machinist Aviation Aircraft AV42

  • Dallas, Texas, United States
  • Mar 27th
Enco Thin Angle Block Set 1/2 deg through 5 deg

Enco Thin Angle Block Set 1/2 deg through 5 deg

  • Susanville, California, United States
  • Mar 27th
L.S. Starrett no. 54b hold downs

L.S. Starrett no. 54b hold downs

  • Southbridge, Massachusetts, United States
  • Mar 27th
Magnetic Precision Vee Block - Quality Import

Magnetic Precision Vee Block - Quality Import

  • Lafayette, New Jersey, United States
  • Mar 27th
2, Matched MACHINIST BLOCKS, Rectangular, 3" x 2" x 1", 2 holes in end 5/8"

2, Matched MACHINIST BLOCKS, Rectangular, 3" x 2" x 1", 2 holes in end 5/8"

  • Round Rock, Texas, United States
  • Mar 27th
Mitutoyo 123 blocks #961-921 with Box Excellent Condition

Mitutoyo 123 blocks #961-921 with Box Excellent Condition

  • Corona, California, United States
  • Mar 27th
Brown & Sharpe "V" Block 750-C with Clamps Machinist Tool USA

Brown & Sharpe "V" Block 750-C with Clamps Machinist Tool USA

  • Havertown, Pennsylvania, United States
  • Mar 27th
Accupro Thin Parallel 1/8" x 6" 06820906 Excellent Condition

Accupro Thin Parallel 1/8" x 6" 06820906 Excellent Condition

  • Corona, California, United States
  • Mar 27th
L.S.Starrett 268 V-Block

L.S.Starrett 268 V-Block

  • Templeton, Massachusetts, United States
  • Mar 26th
JEWERLY POUNDING BLOCK SOLID STEEL HEAVY DUTY OVER 6Lbs 4" X 4" x 1-1/2"

JEWERLY POUNDING BLOCK SOLID STEEL HEAVY DUTY OVER 6Lbs 4" X 4" x 1-1/2"

  • Rochester, New York, United States
  • Mar 26th
Shop Made Machinist's Vee V-Block ToolMaker Fixture Vise GRINDING GUNSMITH

Shop Made Machinist's Vee V-Block ToolMaker Fixture Vise GRINDING GUNSMITH

  • Waterbury, Connecticut, United States
  • Mar 26th
Enco Model 418-4950 2" Tilting Vee Block

Enco Model 418-4950 2" Tilting Vee Block

  • Garden City, Idaho, United States
  • Mar 26th
Five pairs of machinest parallel bars plus charts and booklets

Five pairs of machinest parallel bars plus charts and booklets

  • Denville, New Jersey, United States
  • Mar 26th

People who viewed this item also vieved

Hardinge 5C collets

Hardinge 5C collets

  • Schwenksville, Pennsylvania, United States
  • Feb 27th
5c 19 pc Machinable face collet lot, Ralmikes NJ Brand and other brands included

5c 19 pc Machinable face collet lot, Ralmikes NJ Brand and other brands included

  • Schwenksville, Pennsylvania, United States
  • Feb 27th
Porst Bros. Chicago 5/64 Collet For Mill, lathe machine, Machinist tools

Porst Bros. Chicago 5/64 Collet For Mill, lathe machine, Machinist tools

  • Bloomington, California, United States
  • Feb 27th
BROWN & SHARPE 6" x 12" PRECISION SINE PLATE FIXTURE W/ TAPPED TABLE 925-00

BROWN & SHARPE 6" x 12" PRECISION SINE PLATE FIXTURE W/ TAPPED TABLE 925-00

  • Ellington, New York, United States
  • Feb 28th
SPEEDEX MODEL 360 5C COLLET INDEXING FIXTURE HZ VT W HARDINGE COLLET

SPEEDEX MODEL 360 5C COLLET INDEXING FIXTURE HZ VT W HARDINGE COLLET

  • Ellington, New York, United States
  • Feb 28th
HARDINGE MODEL H-4 5C COLLET INDEXING FIXTURE W/ HARDINGE 5/8" 5C COLLET

HARDINGE MODEL H-4 5C COLLET INDEXING FIXTURE W/ HARDINGE 5/8" 5C COLLET

  • Ellington, New York, United States
  • Feb 28th
680Kg 1499 Lbs Holding Capacity Ductiles Iron Base Push Pull Toggle Clamp

680Kg 1499 Lbs Holding Capacity Ductiles Iron Base Push Pull Toggle Clamp

  • Hong Kong, Hong Kong
  • Mar 5th
4" Flat Hold Down Clamp

4" Flat Hold Down Clamp

  • Scottsboro, Alabama, United States
  • Mar 5th
Clamp Die or Machine setup Clamp

Clamp Die or Machine setup Clamp

  • Scottsboro, Alabama, United States
  • Mar 5th
PARKER 63 1/2 BENCH VISE -PIPE JAWS-HARDY TOOL

PARKER 63 1/2 BENCH VISE -PIPE JAWS-HARDY TOOL

  • Kewaunee, Wisconsin, United States
  • Mar 5th
WILTON BULLET VISE 8 INCH WIDE OPENING,4 INCH JAWS,EXCELLENT CONDITION

WILTON BULLET VISE 8 INCH WIDE OPENING,4 INCH JAWS,EXCELLENT CONDITION

  • Rochester, New York, United States
  • Mar 5th
MACHINIST VISE WITH 4" JAWS AND 2.5" OPENING

MACHINIST VISE WITH 4" JAWS AND 2.5" OPENING

  • New Smyrna Beach, Florida, United States
  • Mar 5th
Rohm 3 jaw manual lathe chuck 8" L0 spindle

Rohm 3 jaw manual lathe chuck 8" L0 spindle

  • Ridge, New York, United States
  • Mar 6th
NICE! HARDINGE-SJOGREN 5C LATHE SPEED CHUCK w/ D1-5 MOUNT + 10 HARDINGE COLLETS

NICE! HARDINGE-SJOGREN 5C LATHE SPEED CHUCK w/ D1-5 MOUNT + 10 HARDINGE COLLETS

  • Covina, California, United States
  • Mar 6th
Gibraltar 6" dia Self Centering 3 Jaw Lathe Chuck

Gibraltar 6" dia Self Centering 3 Jaw Lathe Chuck

  • Saint Peters, Missouri, United States
  • Mar 6th
Two MT0 Dead Centers (Male & Female) Morse Taper 0 Set

Two MT0 Dead Centers (Male & Female) Morse Taper 0 Set

  • Ukraine, Ukraine
  • Mar 12th
riten mt 549105 live center

riten mt 549105 live center

  • Temperance, Michigan, United States
  • Mar 25th
TWO (2) NEW UNUSED MT1 60 DEGREE DEAD CENTER TOOL 4 ATLAS CRAFTSMAN 6" 618 LATHE

TWO (2) NEW UNUSED MT1 60 DEGREE DEAD CENTER TOOL 4 ATLAS CRAFTSMAN 6" 618 LATHE

  • United States
  • Mar 25th
lns hydrobar

lns hydrobar

  • Kansas City, Missouri, United States
  • Jun 29th
Metal shaper

Metal shaper

  • Houston, Texas, United States
  • May 24th
Pexto,Wysong Shear or Brake Back stop 27 inches long With Hardware

Pexto,Wysong Shear or Brake Back stop 27 inches long With Hardware

  • Grand Gorge, New York, United States
  • May 24th
YUASA 8" INDEXER/SUPER SPACER

YUASA 8" INDEXER/SUPER SPACER

  • Rainbow City, Alabama, United States
  • May 29th
Ew Lancaster Cam Indexer s-6-270 W-20-301 6 POSITION ROTARY INDEX camco TABLE

Ew Lancaster Cam Indexer s-6-270 W-20-301 6 POSITION ROTARY INDEX camco TABLE

  • Noblesville, Indiana, United States
  • May 29th
New Adjustable Center 240-001 5.6"-7.2" Height For Rotary Table Or Indexer

New Adjustable Center 240-001 5.6"-7.2" Height For Rotary Table Or Indexer

  • Pierceton, Indiana, United States
  • May 29th
QUADRO MARQUART EXSYS COLLET CHUCK 185E LOC 2201

QUADRO MARQUART EXSYS COLLET CHUCK 185E LOC 2201

  • Sidney, Ohio, United States
  • Jun 2nd
ATS Hardinge A6-S20 CNC Collet Chuck Adapter

ATS Hardinge A6-S20 CNC Collet Chuck Adapter

  • Millstone Township, New Jersey, United States
  • Jun 2nd
D1-3 Collet Chuck W/ Center Faceplate Monarch EE Clausing Jet LeBlond Grizzly

D1-3 Collet Chuck W/ Center Faceplate Monarch EE Clausing Jet LeBlond Grizzly

  • Yorktown, Virginia, United States
  • Jun 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies