+ Post new Ad
VINTAGE SHEETMETAL SHEAR 31" FOOT OPERATED 18 GA? - LOCAL PICKUP, US $17000 – Picture 0
VINTAGE SHEETMETAL SHEAR 31" FOOT OPERATED 18 GA? - LOCAL PICKUP, US $17000 – Picture 1
VINTAGE SHEETMETAL SHEAR 31" FOOT OPERATED 18 GA? - LOCAL PICKUP, US $17000 – Picture 0
VINTAGE SHEETMETAL SHEAR 31" FOOT OPERATED 18 GA? - LOCAL PICKUP, US $17000 – Picture 1

Vintage Sheetmetal Shear 31" Foot Operated 18 Ga? - Local Pickup

US $17000

  • Columbus, Ohio, United States
  • Nov 6th
Open on mobile:
QR code
This was my grandfather's sheetmetal shear, and I estimate it is from the 1940s. It is approximately 40 " wide and stands 45" tall and has a 31" throat. It is unbranded, but looks like an old Niagra. I believe it will handle 18-20 ga. steel. I believe it's cast iron and weighs 150-200 lbs. It is foot operated and functions but needs tlc to make it nice and smooth. I have seen other older units like this at $550-$600. ISSUES: I would say it needs to have the surface cleaned and treated for minor surface rust. Probably needs to have the cutting surface sharpened. It has a broken leg at the top near the table, but that does not keep it from cutting. Missing the left side guide. Table is cracked near one of the extension guides. PICK UP LOCALLY. DOLLYS NOT INCLUDED. I WILL ASSIST WITH LOADING IF YU WANT IT SHIPPED. I RECOMMEND FINDING SHIPPER ON USHIP.  COORDINATING IS BUYER RESPONSIBILITY

Directions

Similar products from Tools for Fabrication Equipment

Uryu Pneumatic Riveter Model UBR-10P, No. 632 for 3/16" rivets

Uryu Pneumatic Riveter Model UBR-10P, No. 632 for 3/16" rivets

  • Cathlamet, Washington, United States
  • Nov 7th
Lockformer Easy Edger

Lockformer Easy Edger

  • Ridgeville, South Carolina, United States
  • Nov 7th
PLATE GRAB SHEET METAL LIFTER MERRILL BROS 1/2 TON LIFT

PLATE GRAB SHEET METAL LIFTER MERRILL BROS 1/2 TON LIFT

  • Ortonville, Michigan, United States
  • Nov 7th
TRI-TOOL TRI TOOL 103 REP PIPE GROOVER BEVELER BEVELING FABRICATION MACHINE TOOL

TRI-TOOL TRI TOOL 103 REP PIPE GROOVER BEVELER BEVELING FABRICATION MACHINE TOOL

  • Phoenix, Arizona, United States
  • Nov 7th
Hydraulic press

Hydraulic press

  • Akron, Ohio, United States
  • Nov 7th
Amada Clamp Plate Lila, Coma, Vela, Original Air and Original Hydraulic

Amada Clamp Plate Lila, Coma, Vela, Original Air and Original Hydraulic

  • Pleasant Hill, Missouri, United States
  • Nov 7th
JANCY HOLEMAKER MAG BASE DRILL W/ CASE FOR PARTS

JANCY HOLEMAKER MAG BASE DRILL W/ CASE FOR PARTS

  • Menomonee Falls, Wisconsin, United States
  • Nov 7th
Amada Press Brake Upper Tool Holder

Amada Press Brake Upper Tool Holder

  • Ripon, California, United States
  • Nov 6th
Heck 7000 Bevel-Mill Mill Beveler, 1/2 HP, 110V, 15 to 45° Bevel Angle | (26A)

Heck 7000 Bevel-Mill Mill Beveler, 1/2 HP, 110V, 15 to 45° Bevel Angle | (26A)

  • Raymore, Missouri, United States
  • Nov 6th
VINTAGE PEXTO 793 SHEET METAL BENDER SEAMER HAND BRAKE HVAC TOOL

VINTAGE PEXTO 793 SHEET METAL BENDER SEAMER HAND BRAKE HVAC TOOL

  • Elkhart, Indiana, United States
  • Nov 6th
10 Ton Bantam Ironworker 4"x1/4" Flats,3/4"Rds,2"x2"x1/4"Ang. Runs

10 Ton Bantam Ironworker 4"x1/4" Flats,3/4"Rds,2"x2"x1/4"Ang. Runs

  • Yorktown, Virginia, United States
  • Nov 6th
Lot of aircraft tools, air vac, drills, rivet gun set, screw knocker, tool bag

Lot of aircraft tools, air vac, drills, rivet gun set, screw knocker, tool bag

  • Haysville, Kansas, United States
  • Nov 6th
****CHICAGO BOX / PAN / FINGER BRAKE MOD BP 812-6 8 FOOT 12 GA^^^^

****CHICAGO BOX / PAN / FINGER BRAKE MOD BP 812-6 8 FOOT 12 GA^^^^

  • West Palm Beach, Florida, United States
  • Nov 5th
CUMMINS DIESEL GENERATOR SET 75 KVA 206 Amps. 240/416 Volts (29277)

CUMMINS DIESEL GENERATOR SET 75 KVA 206 Amps. 240/416 Volts (29277)

  • Cincinnati, Ohio, United States
  • Nov 5th
ROUNDO POWER BENDING ROLL 5' X 10 Ga. (29462)

ROUNDO POWER BENDING ROLL 5' X 10 Ga. (29462)

  • Cincinnati, Ohio, United States
  • Nov 5th
10' X 14Ga. ROTO-DIE HYDRAULIC PRESS BRAKE No. 15 (29414)

10' X 14Ga. ROTO-DIE HYDRAULIC PRESS BRAKE No. 15 (29414)

  • Cincinnati, Ohio, United States
  • Nov 5th
Tri tool 301

Tri tool 301

  • Westbrook, Maine, United States
  • Nov 5th
Metal Shaping Mallet with Delrin heads

Metal Shaping Mallet with Delrin heads

  • Charlton, Massachusetts, United States
  • Nov 5th
22 TON GAP FRAME PRESS No. 22-S, 2" Str., 7" S.H., 22" x 12" Bed (29466)

22 TON GAP FRAME PRESS No. 22-S, 2" Str., 7" S.H., 22" x 12" Bed (29466)

  • Monclova, Ohio, United States
  • Nov 5th
22 TON GAP FRAME PRESS No. 22-S, 2" Str., 7" S.H., 22" x 12" Bed (29465)

22 TON GAP FRAME PRESS No. 22-S, 2" Str., 7" S.H., 22" x 12" Bed (29465)

  • Monclova, Ohio, United States
  • Nov 5th

People who viewed this item also vieved

SOMMA MODEL NO. 2 HEAVY DUTY TOOL HOLDER W/ ROLLER BACK REST & CUT OFF

SOMMA MODEL NO. 2 HEAVY DUTY TOOL HOLDER W/ ROLLER BACK REST & CUT OFF

  • Ellington, New York, United States
  • Jan 30th
BROWN & SHARPE NO. 22 BC FLOATING TAP HOLDER 1" SHANK

BROWN & SHARPE NO. 22 BC FLOATING TAP HOLDER 1" SHANK

  • Ellington, New York, United States
  • Jan 30th
HEAVY DUTY 3/4" CAPACITY ADJUSTABLE TOOL HOLDER 1-1/4" SHANK

HEAVY DUTY 3/4" CAPACITY ADJUSTABLE TOOL HOLDER 1-1/4" SHANK

  • Ellington, New York, United States
  • Jan 30th
78" Arm 17" Column Clausing CL2000H RADIAL DRILL

78" Arm 17" Column Clausing CL2000H RADIAL DRILL

  • Harrison, New Jersey, United States
  • Jan 30th
63" Arm 13.78" Column Clausing CLC1600H RADIAL DRILL

63" Arm 13.78" Column Clausing CLC1600H RADIAL DRILL

  • Harrison, New Jersey, United States
  • Jan 30th
48" Arm 11.81" Column Clausing CL1230H RADIAL DRILL

48" Arm 11.81" Column Clausing CL1230H RADIAL DRILL

  • Harrison, New Jersey, United States
  • Jan 30th
EDM pallets - 50mm x 50mm x 10 mm - 4 threaded holes

EDM pallets - 50mm x 50mm x 10 mm - 4 threaded holes

  • Bloomfield, Connecticut, United States
  • Jan 30th
System 3R Pallet 95mm on Setup Block

System 3R Pallet 95mm on Setup Block

  • Bloomfield, Connecticut, United States
  • Jan 30th
SYSTEM 3R TOOL KIT WIRE EDM SETUP KIT

SYSTEM 3R TOOL KIT WIRE EDM SETUP KIT

  • Howell, Michigan, United States
  • Jan 30th
10pcs Cobalt B10S Type Replacement Blades Shaviv

10pcs Cobalt B10S Type Replacement Blades Shaviv

  • Seminole, Florida, United States
  • Jan 30th
USED S.S. VIBRATORY SHAKER TABLE WITH TWO MARTIN MOTORS

USED S.S. VIBRATORY SHAKER TABLE WITH TWO MARTIN MOTORS

  • Cleveland, Tennessee, United States
  • Jan 30th
Sunnen Hone w/ Power Stroke MBC-1805 MBC-1805-J

Sunnen Hone w/ Power Stroke MBC-1805 MBC-1805-J

  • Webster, Massachusetts, United States
  • Jan 30th
10" x 20" LANDIS 1R UNIVERSAL ID/OD CYLINDRICAL GRINDER - SUPERB AND WELL TOOLED

10" x 20" LANDIS 1R UNIVERSAL ID/OD CYLINDRICAL GRINDER - SUPERB AND WELL TOOLED

  • Harrison, New Jersey, United States
  • Jan 30th
1978 CINCINNATI-MILACRON "MONOSET" TOOL & CUTTER GRINDER w/TOOLING PACKAGE

1978 CINCINNATI-MILACRON "MONOSET" TOOL & CUTTER GRINDER w/TOOLING PACKAGE

  • Harrison, New Jersey, United States
  • Jan 30th
6" x 18" SUPERTEC MODEL STP-618CII 3-AXIS AUTOMATIC SURFACE GRINDER, MFG. 2007

6" x 18" SUPERTEC MODEL STP-618CII 3-AXIS AUTOMATIC SURFACE GRINDER, MFG. 2007

  • Harrison, New Jersey, United States
  • Jan 30th
WILLIANS AND OTHER METAL LATHE DRIVE DOGS DAWGS MACHINIST TOOLING

WILLIANS AND OTHER METAL LATHE DRIVE DOGS DAWGS MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
Clausing 6300 compound base

Clausing 6300 compound base

  • Brooklyn, New York, United States
  • Jan 30th
GENUINE SOUTH BEND 5" DOG DRIVER FACE PLATE 1-1/2"-8 THREADS 9" 10k lathe

GENUINE SOUTH BEND 5" DOG DRIVER FACE PLATE 1-1/2"-8 THREADS 9" 10k lathe

  • Tremont, Illinois, United States
  • Jan 30th
1998 KIA KIA-TURN 28 CNC LATHE, 10" HYD Chk, TAILSTOCK, TOOL SETTER, ETC.

1998 KIA KIA-TURN 28 CNC LATHE, 10" HYD Chk, TAILSTOCK, TOOL SETTER, ETC.

  • Harrison, New Jersey, United States
  • Jan 30th
VINTAGE GENERAL WIGGLER CENTER FINDER USA MADE MACHINIST TOOLING MILLING

VINTAGE GENERAL WIGGLER CENTER FINDER USA MADE MACHINIST TOOLING MILLING

  • Waterford, Michigan, United States
  • Jan 30th
Vintage, The Palmer Co. Victorian Machine Sight Gauge Glass & Metal, Steampunk

Vintage, The Palmer Co. Victorian Machine Sight Gauge Glass & Metal, Steampunk

  • Macon, Missouri, United States
  • Jan 30th
Starrett Machinist Micrometer Wood Wooden Box Case Only

Starrett Machinist Micrometer Wood Wooden Box Case Only

  • Apollo, Pennsylvania, United States
  • Jan 30th
Manual Pexto Slip Rollers/Pinch Rollers-Vintage Steel-Metalworking-Bending Metal

Manual Pexto Slip Rollers/Pinch Rollers-Vintage Steel-Metalworking-Bending Metal

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Malco hole cutter used and comes with new cutter bit.

Malco hole cutter used and comes with new cutter bit.

  • Center Line, Michigan, United States
  • Jan 30th
HEM Saw H160 XLM Bandsaw

HEM Saw H160 XLM Bandsaw

  • Jackson, Alabama, United States
  • Jan 30th
DoALL - vintage BAND SAW, PARTS LOT, ML - 16 - vertical saw.

DoALL - vintage BAND SAW, PARTS LOT, ML - 16 - vertical saw.

  • Vienna, Virginia, United States
  • Jan 30th
AIR DRIVEN CUT OFF SAW

AIR DRIVEN CUT OFF SAW

  • Knoxville, Tennessee, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies