+ Post new Ad
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 0
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 1
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 2
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 3
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 4
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 5
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 0
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 1
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 2
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 3
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 4
Vintage Vulcan CT-37 Reversible Chain Pipe Vise 38" total, US $99.99 – Picture 5

Vintage Vulcan Ct-37 Reversible Chain Pipe Vise 38" Total

US $99.99

  • Ardmore, Oklahoma, United States
  • Jan 30th
Open on mobile:
QR code
With proper attention to the stiff links, this item remains usable. Despite some scuffs, dings, and rust, most of the chain links swivel smoothly. Don't miss out on this keyword-rich and valuable item! This large and unique Vintage Vulcan CT-37 Reversible Chain Pipe Vise with a 38" length is available for purchase. However, a few links require oiling due to stiffness likely caused by past rust build-up. Shipping via FedEx ground is free, but delivery to PO Boxes is not available.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “has rust throughout. some links of the chain are very stiff”

Directions

Similar products from Grips & Tongs

JOSEPH B. FAKES & CO MICHIGAN PRECISION MACHINIST GRINDING VISE *3

JOSEPH B. FAKES & CO MICHIGAN PRECISION MACHINIST GRINDING VISE *3

  • Thomaston, Connecticut, United States
  • Jan 30th
LARGE MACHINIST GRINDING VISE 9 long 3-1/2 wide 3-1/8 tall, weights 14-1/2 lbs

LARGE MACHINIST GRINDING VISE 9 long 3-1/2 wide 3-1/8 tall, weights 14-1/2 lbs

  • Thomaston, Connecticut, United States
  • Jan 30th
VINTAGE WILTON BABY BULLET VISE 2" JAWS MADE IN CHICAGO, IL - NICE

VINTAGE WILTON BABY BULLET VISE 2" JAWS MADE IN CHICAGO, IL - NICE

  • United States
  • Jan 30th
1-43/64" Old Spanner nut machine wrench steel handle spare machine Vintage Tool

1-43/64" Old Spanner nut machine wrench steel handle spare machine Vintage Tool

  • Grand Rapids, Michigan, United States
  • Jan 30th
1" -8 Steel Mill machine vise wrench Locking Table type crank handle spare part

1" -8 Steel Mill machine vise wrench Locking Table type crank handle spare part

  • Grand Rapids, Michigan, United States
  • Jan 30th
7.5" Offset Mill machine wrench Table elevation crank slotted handle tool parts

7.5" Offset Mill machine wrench Table elevation crank slotted handle tool parts

  • Grand Rapids, Michigan, United States
  • Jan 30th
8.25" Offset Mill machine wrench Table elevation crank slotted handle tool parts

8.25" Offset Mill machine wrench Table elevation crank slotted handle tool parts

  • Grand Rapids, Michigan, United States
  • Jan 30th
1-7/16" Hole 17" Long machine wrench Table crank handle special rare tool parts

1-7/16" Hole 17" Long machine wrench Table crank handle special rare tool parts

  • Grand Rapids, Michigan, United States
  • Jan 30th
5 PCS 7-1/4" X 40T Skil Carbide Saw Blade 5/8 x 13/16 knockout, USA

5 PCS 7-1/4" X 40T Skil Carbide Saw Blade 5/8 x 13/16 knockout, USA

  • Lake Arrowhead, California, United States
  • Jan 30th
MINI VISE ALUMINUM BENCH SWIVEL CLAMP ON BENCH MINIATURE VISE JEWELERS HOBBY

MINI VISE ALUMINUM BENCH SWIVEL CLAMP ON BENCH MINIATURE VISE JEWELERS HOBBY

  • North Hollywood, California, United States
  • Jan 30th
3/8 Hex Allen wrench steel handle for magnetic chuck Surface grinder spare parts

3/8 Hex Allen wrench steel handle for magnetic chuck Surface grinder spare parts

  • Grand Rapids, Michigan, United States
  • Jan 30th
1-1/4" 1-7/8" Spanner nut machine wrench steel handle spare machinery parts Tool

1-1/4" 1-7/8" Spanner nut machine wrench steel handle spare machinery parts Tool

  • Grand Rapids, Michigan, United States
  • Jan 30th
1" x 1-1/2" Spanner nut machine wrench steel handle spare machinery parts Tool

1" x 1-1/2" Spanner nut machine wrench steel handle spare machinery parts Tool

  • Grand Rapids, Michigan, United States
  • Jan 30th
Wilton 250N Machinist Vise 10066

Wilton 250N Machinist Vise 10066

  • Kansas City, Missouri, United States
  • Jan 30th
Bessey 4" drill press vise

Bessey 4" drill press vise

  • Warminster, Pennsylvania, United States
  • Jan 30th
Vintage Vulcan No. 1 Pipe Chain Vise by JH Williams & Co.

Vintage Vulcan No. 1 Pipe Chain Vise by JH Williams & Co.

  • Wheatland, Missouri, United States
  • Jan 30th
Wilton 300 3" Bullet Vise

Wilton 300 3" Bullet Vise

  • Roseville, California, United States
  • Jan 30th
MEAD H42-6 FLUID DYNAMICS PNEUMATIC VISE W / FOOT AIR VALVE 2 1/2" WD VISE

MEAD H42-6 FLUID DYNAMICS PNEUMATIC VISE W / FOOT AIR VALVE 2 1/2" WD VISE

  • Auburn, Alabama, United States
  • Jan 30th
VISE JAWS SOLID BRASS 4 INCH

VISE JAWS SOLID BRASS 4 INCH

  • Jamestown, California, United States
  • Jan 30th
MYFORD CROSS SLIDE BOLT PATTERN VISE - RODNEY VISE - NEW

MYFORD CROSS SLIDE BOLT PATTERN VISE - RODNEY VISE - NEW

  • Havertown, Pennsylvania, United States
  • Jan 30th

People who viewed this item also vieved

USED 1/2 5C COLLET , WITH INTERNAL THREADS

USED 1/2 5C COLLET , WITH INTERNAL THREADS

  • San Carlos, California, United States
  • Mar 1st
USED 1.00 5C COLLET , WITH INTERNAL THREADS

USED 1.00 5C COLLET , WITH INTERNAL THREADS

  • San Carlos, California, United States
  • Mar 1st
USED 15/16 FOWLER 5C COLLET , WITH INTERNAL THREADS

USED 15/16 FOWLER 5C COLLET , WITH INTERNAL THREADS

  • San Carlos, California, United States
  • Mar 1st
Valenite 8ZA-2087 ABS-50 Shank Tool Block "U" G042-XA-1035206 NEW IN TUBE

Valenite 8ZA-2087 ABS-50 Shank Tool Block "U" G042-XA-1035206 NEW IN TUBE

  • Ferndale, California, United States
  • Mar 1st
Valenite 8ZA-2073 ABS-50 MODCO Shank Tool Block "U" G028-XA-1016903 NEW IN TUBE

Valenite 8ZA-2073 ABS-50 MODCO Shank Tool Block "U" G028-XA-1016903 NEW IN TUBE

  • Ferndale, California, United States
  • Mar 1st
SHARS 5x5x7" "V" Angle Blocks .00025" NEW

SHARS 5x5x7" "V" Angle Blocks .00025" NEW

  • Saint Charles, Illinois, United States
  • Mar 1st
Side grip clamps & pliers. Lot of 13.

Side grip clamps & pliers. Lot of 13.

  • Union, Missouri, United States
  • Mar 6th
ROBBINS 6" x 7-3/4" COMPOUND SINE PLATE * USA

ROBBINS 6" x 7-3/4" COMPOUND SINE PLATE * USA

  • Edison, New Jersey, United States
  • Mar 7th
5" ROUND MAGNETIC CHUCK "FINE POLE" *

5" ROUND MAGNETIC CHUCK "FINE POLE" *

  • Edison, New Jersey, United States
  • Mar 7th
4" Westcott 3 Jaw Chuck, Plain Back - #6304

4" Westcott 3 Jaw Chuck, Plain Back - #6304

  • Rocky Point, New York, United States
  • Mar 7th
Lot of 3 Ken Forging 8" Strap Clamp Hold Down Goose Neck - No. 942 - USA

Lot of 3 Ken Forging 8" Strap Clamp Hold Down Goose Neck - No. 942 - USA

  • North Hatfield, Massachusetts, United States
  • Mar 7th
Lot Of 2 New!! Iron Base Push Pull Toggle Clamp 227Kg 500 Lbs

Lot Of 2 New!! Iron Base Push Pull Toggle Clamp 227Kg 500 Lbs

  • San Bernardino, California, United States
  • Mar 7th
ROYAL PRODUCTS Morse Taper 3 3MT Live Center Point MADE IN USA

ROYAL PRODUCTS Morse Taper 3 3MT Live Center Point MADE IN USA

  • Millbrae, California, United States
  • Mar 27th
NEW UNUSED MT2 CUP CENTER WORK HOLDER TOOL 4 WOOD METAL LATHE MORSE TAPER 2

NEW UNUSED MT2 CUP CENTER WORK HOLDER TOOL 4 WOOD METAL LATHE MORSE TAPER 2

  • Danville, New Hampshire, United States
  • Mar 28th
MT2 MT3 HEADSTOCK SPINDLE SLEEVE ARBOR MT2 DEAD CENTER LATHE MACHINIST TOOL LOT

MT2 MT3 HEADSTOCK SPINDLE SLEEVE ARBOR MT2 DEAD CENTER LATHE MACHINIST TOOL LOT

  • Danville, New Hampshire, United States
  • Mar 28th
17655 Brass Shim Stock - Length: 60" Thickness: .010" Width: 6"

17655 Brass Shim Stock - Length: 60" Thickness: .010" Width: 6"

  • Bristol, Rhode Island, United States
  • May 24th
Magnetic Lifter 1000 KG - 2200 LBS Hoist Magnets - Steel Lifting PML-10 - Crane

Magnetic Lifter 1000 KG - 2200 LBS Hoist Magnets - Steel Lifting PML-10 - Crane

  • Seattle, Washington, United States
  • May 24th
Eriez RPL-22 Lifting Magnet. Industrial Magnet 2200 lb Capacity

Eriez RPL-22 Lifting Magnet. Industrial Magnet 2200 lb Capacity

  • Colfax, North Carolina, United States
  • May 24th
4" rotary table combo

4" rotary table combo

  • Norcross, Georgia, United States
  • May 29th
Yuasa CNC Rotary Table / Indexer CPDX-6 With UDNC-MY53 Control

Yuasa CNC Rotary Table / Indexer CPDX-6 With UDNC-MY53 Control

  • Lake Saint Louis, Missouri, United States
  • May 29th
KITAGAWA ROTARY 5C INDEXER TC100-33 MODEL 2018

KITAGAWA ROTARY 5C INDEXER TC100-33 MODEL 2018

  • Santa Clarita, California, United States
  • May 29th
V-Block; Magnetic; Two Sides (CTAM 9473)

V-Block; Magnetic; Two Sides (CTAM 9473)

  • Sicklerville, New Jersey, United States
  • May 29th
V-Block; Brown & Sharpe # 750-B (CTAM 9471)

V-Block; Brown & Sharpe # 750-B (CTAM 9471)

  • Sicklerville, New Jersey, United States
  • May 29th
Tietzmann Eng. Co. - Machinist Step Blocks Set - 22 Piece with Tray

Tietzmann Eng. Co. - Machinist Step Blocks Set - 22 Piece with Tray

  • Linden, New Jersey, United States
  • May 29th
14 Pc Techniks CAT 40 ER16-2.76" CNC Chucks Kit-10 Pcs.Coolant Collet Set,Wrench

14 Pc Techniks CAT 40 ER16-2.76" CNC Chucks Kit-10 Pcs.Coolant Collet Set,Wrench

  • Hamden, Connecticut, United States
  • Jun 3rd
14 Pc. Techniks CAT 40 ER16-2.76" CNC Collet Chucks Kit-10 Pcs.Collet Set,Wrench

14 Pc. Techniks CAT 40 ER16-2.76" CNC Collet Chucks Kit-10 Pcs.Collet Set,Wrench

  • Hamden, Connecticut, United States
  • Jun 3rd
3 Pc. Techniks CAT 40 ER 16-2.76" 25K RPM Balance CNC Mill Collet Chucks

3 Pc. Techniks CAT 40 ER 16-2.76" 25K RPM Balance CNC Mill Collet Chucks

  • Hamden, Connecticut, United States
  • Jun 3rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies