+ Post new Ad
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 0
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 1
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 2
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 3
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 4
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 5
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 6
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 7
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 0
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 1
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 2
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 3
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 4
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 5
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 6
Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use., US $25.00 – Picture 7

Vise Jaws. Adjustable Ball Bearing, Flat Ground Bearing Faces. Specialty Use.

US $25.00

  • Port Angeles, Washington, United States
  • Jan 30th
Open on mobile:
QR code
Two Hardened Steel Special Tooling Vises. Each vise has two ball bearings with a flattened surface that fully rotate to accommodate irregular pieces in any vise. The half circle rotates to 15 degrees in either direction. The smaller one rotates to 30 degrees. This is "old school" machining at it's best! Used by a master machinist for years, it was handed down to me when I was a machinist as well. It comes in handy for a number of uses besides milling odd pieces. The dimensions are 1.) 5.5" x 1.5" x 1.5" and, 2.) 2.5" x 1.3" x .99". It can be a workholding vise for inspection purposes besides use in machining. These are unique pieces!

Directions

Similar products from Other Workholding Tools

REXROTH 31" ADJUSTABLE PRESS / HOLDER

REXROTH 31" ADJUSTABLE PRESS / HOLDER

  • Bosque Farms, New Mexico, United States
  • Jan 30th
HARDINGE 5C COLLET INDEXER MODEL HV-4N

HARDINGE 5C COLLET INDEXER MODEL HV-4N

  • Reseda, California, United States
  • Jan 30th
ROCKWELL UNI-VISE, MILL-GRINDER FIXTURE. 4-WAY UNIVERSAL TOOL.

ROCKWELL UNI-VISE, MILL-GRINDER FIXTURE. 4-WAY UNIVERSAL TOOL.

  • Overland Park, Kansas, United States
  • Jan 30th
ER16 Precision Spring Collet Set CNC Milling Lathe Tool & Workholding 10 PCS

ER16 Precision Spring Collet Set CNC Milling Lathe Tool & Workholding 10 PCS

  • Hong Kong, Hong Kong
  • Jan 30th
(#4475C) Used Machinist Shop Made Hardened & Ground Steel Parallel

(#4475C) Used Machinist Shop Made Hardened & Ground Steel Parallel

  • Warren, Michigan, United States
  • Jan 30th
300 KG - 660 Lbs Magnetic Lifter - Lifting Magnet Steel Hoist Crane PML-3 Mag

300 KG - 660 Lbs Magnetic Lifter - Lifting Magnet Steel Hoist Crane PML-3 Mag

  • Seattle, Washington, United States
  • Jan 30th
2200 lb Magnetic Lifter 1000 KG Magnet Lifting Mag Lifter Steel Hoist Crane NEW

2200 lb Magnetic Lifter 1000 KG Magnet Lifting Mag Lifter Steel Hoist Crane NEW

  • Seattle, Washington, United States
  • Jan 30th
STRONG HAND EXPAND-O PLIERS - SET OF TWO - 6" & 10"

STRONG HAND EXPAND-O PLIERS - SET OF TWO - 6" & 10"

  • Indianapolis, Indiana, United States
  • Jan 30th
Jergens 49504 35mm Ball Lock Receiver Bushing New (22 available)

Jergens 49504 35mm Ball Lock Receiver Bushing New (22 available)

  • Minneapolis, Minnesota, United States
  • Jan 30th
C Clamp, Vintage Brink & Cotton 2" & Unbreakable 3" Made in USA

C Clamp, Vintage Brink & Cotton 2" & Unbreakable 3" Made in USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
SWEET !! ASSORTED LOT OF 5C COLLETS WITH HUOT STAND SOME HARDINGE

SWEET !! ASSORTED LOT OF 5C COLLETS WITH HUOT STAND SOME HARDINGE

  • Norwalk, California, United States
  • Jan 30th
FLANGE NUT 9/16 THREAD, 7/8 HEX Black oxide (LOT of 4)

FLANGE NUT 9/16 THREAD, 7/8 HEX Black oxide (LOT of 4)

  • Lisle, Illinois, United States
  • Jan 30th
GIBRALTAR 2pc 1/2" -13x4" LONG STUDS WORK HOLDING MACHINISTS TOOLS LATHE MILL

GIBRALTAR 2pc 1/2" -13x4" LONG STUDS WORK HOLDING MACHINISTS TOOLS LATHE MILL

  • Punta Gorda, Florida, United States
  • Jan 30th
PRESS FIT DIAMOND 35/64 LOCATING PIN PR-8 #52976

PRESS FIT DIAMOND 35/64 LOCATING PIN PR-8 #52976

  • Resaca, Georgia, United States
  • Jan 30th
SLIP FIT 1/2 LOCATING FIXTURE PIN ROUND C-7 #52977

SLIP FIT 1/2 LOCATING FIXTURE PIN ROUND C-7 #52977

  • Resaca, Georgia, United States
  • Jan 30th
DIAMOND 0.653 LOCATING PIN SLIP FIT R-8 #52982

DIAMOND 0.653 LOCATING PIN SLIP FIT R-8 #52982

  • Resaca, Georgia, United States
  • Jan 30th
DIAMOND 1/2 SLIP FIT LOCATING PIN 3/4 DIAMETER SHANK #52981

DIAMOND 1/2 SLIP FIT LOCATING PIN 3/4 DIAMETER SHANK #52981

  • Resaca, Georgia, United States
  • Jan 30th
DIAMOND FIXTURE LOCATING PIN #62142 0.5575 DIAMETER #52980

DIAMOND FIXTURE LOCATING PIN #62142 0.5575 DIAMETER #52980

  • Resaca, Georgia, United States
  • Jan 30th
LOCATING PIN ROUND 0.653 C-8 SLIP FIT #52983

LOCATING PIN ROUND 0.653 C-8 SLIP FIT #52983

  • Resaca, Georgia, United States
  • Jan 30th
Machinist Jack Screws - set of two

Machinist Jack Screws - set of two

  • Antrim, New Hampshire, United States
  • Jan 30th

People who viewed this item also vieved

5C COLLET HOLDING FIXTURE, HORIZONTAL OR VERTICAL, QUICK OPEN & CLOSING

5C COLLET HOLDING FIXTURE, HORIZONTAL OR VERTICAL, QUICK OPEN & CLOSING

  • Caledonia, Wisconsin, United States
  • Jun 4th
Taft-peirce universal right angle iron 4"x 3-3/4" x 5" (Inv.35467)

Taft-peirce universal right angle iron 4"x 3-3/4" x 5" (Inv.35467)

  • Portland, Connecticut, United States
  • Jun 4th
61" x 94-1/2" x 1" Milled and/or Blanchard Ground Steel table

61" x 94-1/2" x 1" Milled and/or Blanchard Ground Steel table

  • Cedarburg, Wisconsin, United States
  • Jun 4th
TTC Bull Nose Live Center - Overall Length : 7.62'' Taper: 4 MT

TTC Bull Nose Live Center - Overall Length : 7.62'' Taper: 4 MT

  • Duncan, South Carolina, United States
  • Jun 5th
Cogsdill Strait Shank Dead Center CSF D 01 D (LOC2033D) TS6

Cogsdill Strait Shank Dead Center CSF D 01 D (LOC2033D) TS6

  • Laingsburg, Michigan, United States
  • Jun 5th
BISON Bull Head Live Center - Overall Length : 8.15'' Taper: 5 MT

BISON Bull Head Live Center - Overall Length : 8.15'' Taper: 5 MT

  • Duncan, South Carolina, United States
  • Jun 5th
Hardinge 1-27/32" Round B22 Steel Finger Feed Pads Set B Style

Hardinge 1-27/32" Round B22 Steel Finger Feed Pads Set B Style

  • Chicago, Illinois, United States
  • Jun 7th
1 pc OF THE 4 PICTURED NEW REWDALE & LYNDEX TG100 57/64" COLLETS CNC TOOLING

1 pc OF THE 4 PICTURED NEW REWDALE & LYNDEX TG100 57/64" COLLETS CNC TOOLING

  • Xenia, Ohio, United States
  • Jun 7th
6 - R8 STEEL COLLETS 1/8" To 11/16" Diameter (In Good Condition)

6 - R8 STEEL COLLETS 1/8" To 11/16" Diameter (In Good Condition)

  • Joplin, Missouri, United States
  • Jun 7th
9" Metal Welding Clamp Quick-Action Release, Flat Blade

9" Metal Welding Clamp Quick-Action Release, Flat Blade

  • Blowing Rock, North Carolina, United States
  • Jun 8th
LOT OF 4 TOGGLE CLAMPS DE.STA.CO CARR LANE MODEL # 207-U 225-UB 603 604

LOT OF 4 TOGGLE CLAMPS DE.STA.CO CARR LANE MODEL # 207-U 225-UB 603 604

  • Ellington, New York, United States
  • Jun 8th
WILLIAMS NO.8 VULCAN HEAVY DUTY C-CLAMP NEVER USED!

WILLIAMS NO.8 VULCAN HEAVY DUTY C-CLAMP NEVER USED!

  • Trenton, New Jersey, United States
  • Jun 8th
Palmgren 9612153 Drill press vise w/lugs, 1.75"

Palmgren 9612153 Drill press vise w/lugs, 1.75"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9638959 Jack Screw set 2.756" to 5.906" w/pads

Palmgren 9638959 Jack Screw set 2.756" to 5.906" w/pads

  • Wayland, Michigan, United States
  • Jun 9th
lot of 3 precision ground and threaded screws for machinist prescion vice nice

lot of 3 precision ground and threaded screws for machinist prescion vice nice

  • Hadley, Pennsylvania, United States
  • Jun 9th
H & R 1.5mm x 60 Serrated Round Cast Iron Soft Jaws for 11" Chuck HR-82-2-CI

H & R 1.5mm x 60 Serrated Round Cast Iron Soft Jaws for 11" Chuck HR-82-2-CI

  • Venice, Florida, United States
  • Jun 9th
Buck Chuck A8-D5 D1-5 Mount Lathe Chuck Adapter Plate for use w/ 8" Chucks

Buck Chuck A8-D5 D1-5 Mount Lathe Chuck Adapter Plate for use w/ 8" Chucks

  • Venice, Florida, United States
  • Jun 9th
4" Diameter 4 Jaw Chuck For 6" Lathe Craftsman Atlas 101 618 Power Companion

4" Diameter 4 Jaw Chuck For 6" Lathe Craftsman Atlas 101 618 Power Companion

  • North Canton, Ohio, United States
  • Jun 9th
Dover Publications-The Complete Book Of Origami

Dover Publications-The Complete Book Of Origami

  • Hickory Hills, Illinois, United States
  • Jun 24th
"Bamboo Fixed Circular Needles 32""-Size 7/4.5mm"

"Bamboo Fixed Circular Needles 32""-Size 7/4.5mm"

  • Hickory Hills, Illinois, United States
  • Jun 24th
"Featherweight Bent Trimmers 8""-"

"Featherweight Bent Trimmers 8""-"

  • Hickory Hills, Illinois, United States
  • Jun 24th
mini v block set toolmaker grinding lath milling 1x1x1 3/8

mini v block set toolmaker grinding lath milling 1x1x1 3/8

  • Hadley, Pennsylvania, United States
  • Oct 24th
machinist TOOLMAKERS grinding millingV-BLOCK USA MACHINIST toolmaker made

machinist TOOLMAKERS grinding millingV-BLOCK USA MACHINIST toolmaker made

  • Hadley, Pennsylvania, United States
  • Oct 24th
machinist TOOLMAKERS grinding milling V-BLOCK USA MACHINIST toolmaker made

machinist TOOLMAKERS grinding milling V-BLOCK USA MACHINIST toolmaker made

  • Hadley, Pennsylvania, United States
  • Oct 24th
4"(100 mm) Horizontal Vertical Rotary Table 4 Slot+70 mm 4 Jaws Chuck+Back plate

4"(100 mm) Horizontal Vertical Rotary Table 4 Slot+70 mm 4 Jaws Chuck+Back plate

  • New Delhi, Delhi, India
  • Nov 3rd
3" (75 mm) Regular Horizontal Vertical Rotary Table 3 Slots+ 80 mm 3 jaws chuck

3" (75 mm) Regular Horizontal Vertical Rotary Table 3 Slots+ 80 mm 3 jaws chuck

  • New Delhi, Delhi, India
  • Nov 3rd
2011 Haas TR2105XH Trunnion Table CNC #7786082

2011 Haas TR2105XH Trunnion Table CNC #7786082

  • Scottsdale, Arizona, United States
  • Nov 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies