+ Post new Ad
Vortex 2450 SC 4E Upcut "Tornado", US $185.00 – Picture 0
Vortex 2450 SC 4E Upcut "Tornado", US $185.00 – Picture 0

Vortex 2450 Sc 4e Upcut "tornado"

US $185.00

  • Bethlehem, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
This award winning tool design combines a roughing and a finishing tool into one tool.  It achieves never before attained feed rates up to an amazing 3500 inches per minute.  Current practical maximum feed rates of 1000-1500 inches per minute are recommended based on routing 3/4" thick MDF or particleboard at 24,000 RPM.  Not recommended to operate under 600 inches per minute.  The flute geometry features a larger flute preceding the roughing edges which allows them to take a bigger bite.  Following close behind are the finishing edges which produce a clean cut.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Vortex

Directions

Similar products from Other Cutting Equipment & Expendables

1/4"-20 SN TREAD CUTTING DIE (E)

1/4"-20 SN TREAD CUTTING DIE (E)

  • Lebanon, Tennessee, United States
  • Jan 30th
NICE LOT OF 8 HSS COUNTERBORE 11/16" TO 1" GREENFIELD MORSE

NICE LOT OF 8 HSS COUNTERBORE 11/16" TO 1" GREENFIELD MORSE

  • Ellington, New York, United States
  • Jan 30th
J&L THREAD CHASERS, LOT OF 8 SETS OF CHASERS FOR 21 & 23 J&L DIE HEAD,

J&L THREAD CHASERS, LOT OF 8 SETS OF CHASERS FOR 21 & 23 J&L DIE HEAD,

  • Portland, Oregon, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #8 10P 12-13T 7/8"bore HS NATIONAL

USED INVOLUTE GEAR CUTTER #8 10P 12-13T 7/8"bore HS NATIONAL

  • Kelly, North Carolina, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #3 10P 35-54T 7/8"bore Brown And Sharpe

USED INVOLUTE GEAR CUTTER #3 10P 35-54T 7/8"bore Brown And Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
LOT OF 2 HSS KEYSEAT CUTTERS w/ 1/2" SHANKS

LOT OF 2 HSS KEYSEAT CUTTERS w/ 1/2" SHANKS

  • Norwalk, California, United States
  • Jan 30th
IRWIN HANSON 3094104 Deep Well Threadchaser Set,Metric,4 Pcs

IRWIN HANSON 3094104 Deep Well Threadchaser Set,Metric,4 Pcs

  • Mount Pleasant, North Carolina, United States
  • Jan 30th
MILLING CUTTER 3X1X1-1/4 DOUBLE ANGEL 70 DEG INCLUDED HS

MILLING CUTTER 3X1X1-1/4 DOUBLE ANGEL 70 DEG INCLUDED HS

  • Wadley, Alabama, United States
  • Jan 30th
TRW 6" SHELL MILL HS

TRW 6" SHELL MILL HS

  • Wadley, Alabama, United States
  • Jan 30th
CORNER ROUNDING MILLING CUTTER 1/2" RH 1" HSS CHINA

CORNER ROUNDING MILLING CUTTER 1/2" RH 1" HSS CHINA

  • Wadley, Alabama, United States
  • Jan 30th
*NEW* 2 NOS HARVEY'S BIO 520 CUTTING OIL FRESHENER ACTIVE ENZYME CLEANING KIT

*NEW* 2 NOS HARVEY'S BIO 520 CUTTING OIL FRESHENER ACTIVE ENZYME CLEANING KIT

  • Homer Glen, Illinois, United States
  • Jan 30th
Moon Cutter Co: Side Mill Cutter: 6" Diameter x 5/8"W x 1-1/4" Arbor, 24T !52B!

Moon Cutter Co: Side Mill Cutter: 6" Diameter x 5/8"W x 1-1/4" Arbor, 24T !52B!

  • Saint Louis, Missouri, United States
  • Jan 30th
1pcs Carbide Rotary File/Burr Conical pointed-nose 6mm

1pcs Carbide Rotary File/Burr Conical pointed-nose 6mm

  • CN, China
  • Jan 30th
METAL REMOVAL - CARBIDE BUR 1/8 x 1/8 x 1/2 x 1.1/2 SL-42 INCL ANGLE (5pcs)

METAL REMOVAL - CARBIDE BUR 1/8 x 1/8 x 1/2 x 1.1/2 SL-42 INCL ANGLE (5pcs)

  • Summit-Argo, Illinois, United States
  • Jan 30th
BESLEY 3/4" 14 NPTF TAPS (QTY3) 33TREAT 3.25" OAL 5R719 (LOC1047A)

BESLEY 3/4" 14 NPTF TAPS (QTY3) 33TREAT 3.25" OAL 5R719 (LOC1047A)

  • Laingsburg, Michigan, United States
  • Jan 30th
BESLEY 3/4" 14 NPTF TAPS (QTY3) 3.25" OAL 5R765 (LOC1063A)

BESLEY 3/4" 14 NPTF TAPS (QTY3) 3.25" OAL 5R765 (LOC1063A)

  • Laingsburg, Michigan, United States
  • Jan 30th
SET OF 6 NEW TRW THREAD CHASERS DIE 4-4-3/4 12 NS S GRD. NIB high speed steel

SET OF 6 NEW TRW THREAD CHASERS DIE 4-4-3/4 12 NS S GRD. NIB high speed steel

  • Lapeer, Michigan, United States
  • Jan 30th
SET OF 4 NEW TRW THREAD CHASERS DIE 2" TO 2-5/8" 12 NS S GRD. high speed steel

SET OF 4 NEW TRW THREAD CHASERS DIE 2" TO 2-5/8" 12 NS S GRD. high speed steel

  • Lapeer, Michigan, United States
  • Jan 30th
Counter Bore Spot Face Tooling lot of 6

Counter Bore Spot Face Tooling lot of 6

  • Berlin, Connecticut, United States
  • Jan 30th
Titex 16MM High Speed Taper Shank Drill Bit

Titex 16MM High Speed Taper Shank Drill Bit

  • Abingdon, Maryland, United States
  • Jan 30th

People who viewed this item also vieved

1 Pc Kennametal NPL132F Profiling Insert K313 ..........(6-1-4)

1 Pc Kennametal NPL132F Profiling Insert K313 ..........(6-1-4)

  • San Antonio, Texas, United States
  • Feb 13th
10 Pc Kennametal NPL132F Profiling Insert K313 ..........(6-1-4)

10 Pc Kennametal NPL132F Profiling Insert K313 ..........(6-1-4)

  • San Antonio, Texas, United States
  • Feb 13th
DATA FLUTE SSST40750 5/8 x 3" END MILL

DATA FLUTE SSST40750 5/8 x 3" END MILL

  • Greensboro, North Carolina, United States
  • Feb 15th
1.425" Diameter Roughing End Mill HSS

1.425" Diameter Roughing End Mill HSS

  • Davison, Michigan, United States
  • Feb 15th
Lot of (4) Morse High Speed Steel Reamers NOS

Lot of (4) Morse High Speed Steel Reamers NOS

  • Elysburg, Pennsylvania, United States
  • Feb 25th
1-1/32" Bridge Reamer

1-1/32" Bridge Reamer

  • Mount Clare, West Virginia, United States
  • Feb 25th
4 Strippit 8BN 1-1/4 C-Frame Punch Frames

4 Strippit 8BN 1-1/4 C-Frame Punch Frames

  • Ambridge, Pennsylvania, United States
  • Mar 4th
W A WHITNEY PEXTO PUNCH& DIES SHEET METAL FABRICATION TIN SMITH IRONWORK PRESS

W A WHITNEY PEXTO PUNCH& DIES SHEET METAL FABRICATION TIN SMITH IRONWORK PRESS

  • Ortonville, Michigan, United States
  • Mar 4th
LENOX 5WDG4 BIMETAL BAND SAW BLADE 11' 3" LONG 1'' WIDTH 0.035" THICK

LENOX 5WDG4 BIMETAL BAND SAW BLADE 11' 3" LONG 1'' WIDTH 0.035" THICK

  • Milford, Connecticut, United States
  • Mar 27th
ASSORTED LOT 19 HSS SLITTING & SLOTTING SAWS 2-1/8" TO 3" WITH 1" BORE NATIONAL

ASSORTED LOT 19 HSS SLITTING & SLOTTING SAWS 2-1/8" TO 3" WITH 1" BORE NATIONAL

  • Ellington, New York, United States
  • Mar 27th
New 10 Pcs - DNGA 431 Ceramic Inserts Kyocera

New 10 Pcs - DNGA 431 Ceramic Inserts Kyocera

  • Cincinnati, Ohio, United States
  • Jun 24th
Ceramic Turning Inserts TNGA 432 CC514 Qty 3 <2105>

Ceramic Turning Inserts TNGA 432 CC514 Qty 3 <2105>

  • Saint Louis, Missouri, United States
  • Jun 25th
6 Spline Gear Pull Broach 2&#034; Finisher TBCO.

6 Spline Gear Pull Broach 2" Finisher TBCO.

  • Lutz, Florida, United States
  • May 28th
6 Spline Gear Pull Broach 2-1/4&#034; Finisher TBCO.

6 Spline Gear Pull Broach 2-1/4" Finisher TBCO.

  • Lutz, Florida, United States
  • May 28th
Used turning or facing bits also for flycutting

Used turning or facing bits also for flycutting

  • Redding, California, United States
  • May 29th
Mo-Max 5/8&#034; Lathe Cutter Tool Bit The Cleveland Twist Drill Co.

Mo-Max 5/8" Lathe Cutter Tool Bit The Cleveland Twist Drill Co.

  • Roseville, Michigan, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies