+ Post new Ad
Walnut Burl wood veneer 8" x 30" paper backer "A" grade quality, US $390 – Picture 0
Walnut Burl wood veneer 8" x 30" paper backer "A" grade quality, US $390 – Picture 0

Walnut Burl Wood Veneer 8" X 30" Paper Backer "a" Grade Quality

US $390

  • Louisville, Kentucky, United States
  • Jun 8th
Open on mobile:
QR code
Walnut Burl wood veneer 8" x 30" with paper backing. "A" grade quality 1/40th" total thickness. ONE piece per price.  Each piece slightly different in appearance if more than one.  About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.  Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.   Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40”   Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” Phenolic backed veneer = 1/16th"-1/25th" How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly.   Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection

Directions

Similar products from Industrial Wood & Interline

Wood Veneer Ziricote 7x21 2Pcs Total Raw Veneer "EXOTIC" ZI3 6-6-16

Wood Veneer Ziricote 7x21 2Pcs Total Raw Veneer "EXOTIC" ZI3 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote 9x60 2Pcs Total Raw Veneer "EXOTIC" ZI.S1 6-6-16

Wood Veneer Ziricote 9x60 2Pcs Total Raw Veneer "EXOTIC" ZI.S1 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote LOT 8Pcs Total Raw Veneer "EXOTIC" ZI4 6-6-16

Wood Veneer Ziricote LOT 8Pcs Total Raw Veneer "EXOTIC" ZI4 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ebony 5x84 8Pcs Total Raw Veneer "EXOTIC" EB.S1 6-6-16

Wood Veneer Ebony 5x84 8Pcs Total Raw Veneer "EXOTIC" EB.S1 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote 8x100 2Pcs Total Raw Veneer "EXOTIC" ZI.S2 6-6-16

Wood Veneer Ziricote 8x100 2Pcs Total Raw Veneer "EXOTIC" ZI.S2 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote 7x80 2Pcs Total Raw Veneer "EXOTIC" ZI.S3 6-6-16

Wood Veneer Ziricote 7x80 2Pcs Total Raw Veneer "EXOTIC" ZI.S3 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote 10x93 3Pcs Total Raw Veneer "EXOTIC" ZI.S4 6-6-16

Wood Veneer Ziricote 10x93 3Pcs Total Raw Veneer "EXOTIC" ZI.S4 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote 11x80 1Pcs Total Raw Veneer "EXOTIC" ZI.S5 6-6-16

Wood Veneer Ziricote 11x80 1Pcs Total Raw Veneer "EXOTIC" ZI.S5 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote 5x90 2Pcs Total Raw Veneer "EXOTIC" ZI.S6 6-6-16

Wood Veneer Ziricote 5x90 2Pcs Total Raw Veneer "EXOTIC" ZI.S6 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote 5x88 3Pcs Total Raw Veneer "EXOTIC" ZI.S7 6-6-16

Wood Veneer Ziricote 5x88 3Pcs Total Raw Veneer "EXOTIC" ZI.S7 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 8th
Wood Veneer Ziricote 5x100 4Pcs Total Raw Veneer "EXOTIC" ZI.S8 6-6-16

Wood Veneer Ziricote 5x100 4Pcs Total Raw Veneer "EXOTIC" ZI.S8 6-6-16

  • Jeffersonville, Indiana, United States
  • Jun 7th
Band It 38565 Melamine Iron-on Edgebanding, 3/4" X 50', White

Band It 38565 Melamine Iron-on Edgebanding, 3/4" X 50', White

  • Teaneck, New Jersey, United States
  • Jun 7th
Wood Veneer Maple 42x144 1 Piece 10Mil Paper Backed "EXOTIC" 1610 31-32

Wood Veneer Maple 42x144 1 Piece 10Mil Paper Backed "EXOTIC" 1610 31-32

  • Jeffersonville, Indiana, United States
  • Jun 7th
Wood Veneer Maple 42x98 1 Piece 10Mil Paper Backed "EXOTIC" 1610 33

Wood Veneer Maple 42x98 1 Piece 10Mil Paper Backed "EXOTIC" 1610 33

  • Jeffersonville, Indiana, United States
  • Jun 7th
Goncalo Alves (Tigerwood) wood veneer 9" x 17" raw no backing 1/42" thickness

Goncalo Alves (Tigerwood) wood veneer 9" x 17" raw no backing 1/42" thickness

  • Louisville, Kentucky, United States
  • Jun 7th
11 pieces of walnut burl raw wood veneer 3 7/8 " x 7 1/2" each & 1/42" thick

11 pieces of walnut burl raw wood veneer 3 7/8 " x 7 1/2" each & 1/42" thick

  • Scarsdale, New York, United States
  • Jun 7th
Wood Veneer Zebrawood 48x121 1 Piece Wood Backed "EXOTIC" MIA 77

Wood Veneer Zebrawood 48x121 1 Piece Wood Backed "EXOTIC" MIA 77

  • Jeffersonville, Indiana, United States
  • Jun 7th
Wood Veneer Zebrawood 48x121 1 Piece Wood Backed "EXOTIC" MIA 78

Wood Veneer Zebrawood 48x121 1 Piece Wood Backed "EXOTIC" MIA 78

  • Jeffersonville, Indiana, United States
  • Jun 7th
Walnut wood veneer 24" x 48" on paper backer "A" grade quality 1/40th" thickness

Walnut wood veneer 24" x 48" on paper backer "A" grade quality 1/40th" thickness

  • Louisville, Kentucky, United States
  • Jun 7th
Waterfall Bubinga (Kewazinga) wood veneer 13" x 78" raw no backing 1/32" thick

Waterfall Bubinga (Kewazinga) wood veneer 13" x 78" raw no backing 1/32" thick

  • Louisville, Kentucky, United States
  • Jun 7th

People who viewed this item also vieved

1xHigh Quality Blade Holder for Small Graphtec Vinyl Cutter Plotter Blade NEW

1xHigh Quality Blade Holder for Small Graphtec Vinyl Cutter Plotter Blade NEW

  • shanghai, China
  • Jan 30th
Lot 2981 Chair Rail Or Casing Weinig / WKW Corrugated Knives Shaper Moulder

Lot 2981 Chair Rail Or Casing Weinig / WKW Corrugated Knives Shaper Moulder

  • College Station, Texas, United States
  • Jan 30th
Lot 2950 Cope And Stick Moulding Weinig / WKW Corrugated Knives Shaper Moulder

Lot 2950 Cope And Stick Moulding Weinig / WKW Corrugated Knives Shaper Moulder

  • College Station, Texas, United States
  • Jan 30th
Slip Water Stones. 1000, 4000, and 8000 grit

Slip Water Stones. 1000, 4000, and 8000 grit

  • Ijamsville, Maryland, United States
  • Jan 30th
Cone Sharpening Waterstones

Cone Sharpening Waterstones

  • Ijamsville, Maryland, United States
  • Jan 30th
Vintage Wood Lathe Turning Chisel 15/32" Curved

Vintage Wood Lathe Turning Chisel 15/32" Curved

  • Clatskanie, Oregon, United States
  • Jan 30th
SK11 Quick Corner Clamp

SK11 Quick Corner Clamp

  • Osaka, Japan
  • Jan 30th
SK11 Gear Puller 3 Claws diameter 150

SK11 Gear Puller 3 Claws diameter 150

  • Osaka, Japan
  • Jan 30th
SK11 Hobby Vice 25

SK11 Hobby Vice 25

  • Osaka, Japan
  • Jan 30th
(2) Titex 8.4MM Screw Machine Parabolic Drills, 5057240

(2) Titex 8.4MM Screw Machine Parabolic Drills, 5057240

  • Abingdon, Maryland, United States
  • Jan 30th
1/4" Dia Shank 5/16" Cutting Diameter Straight Router Bit Silver Tone Red

1/4" Dia Shank 5/16" Cutting Diameter Straight Router Bit Silver Tone Red

  • Hong Kong, Hong Kong
  • Jan 30th
Woodworking Tool Straight Round Nose Router Bit 3/4" Cutting Diameter

Woodworking Tool Straight Round Nose Router Bit 3/4" Cutting Diameter

  • Hong Kong, Hong Kong
  • Jan 30th
DARRA-JAMES 9 1/2 inch Band Saw Model 595 Operator's & Parts Manual 0884

DARRA-JAMES 9 1/2 inch Band Saw Model 595 Operator's & Parts Manual 0884

  • Nixa, Missouri, United States
  • Jan 30th
POWR-KRAFT 10" Radial Arm Saw TPC-2300B Instructions & Parts Manual 0562

POWR-KRAFT 10" Radial Arm Saw TPC-2300B Instructions & Parts Manual 0562

  • Nixa, Missouri, United States
  • Jan 30th
Pettibone Model 360 Speed Swing Parts Manual

Pettibone Model 360 Speed Swing Parts Manual

  • Cumberland, Maryland, United States
  • Jan 30th
DeWALT 3-knife shaper head set TR-6501

DeWALT 3-knife shaper head set TR-6501

  • Cleveland, Ohio, United States
  • Jan 30th
WOODWORKING WOOD POCKET HOLE DRILL GUIDE JIG TOOL KIT POCKETHOLE FACE FRAME

WOODWORKING WOOD POCKET HOLE DRILL GUIDE JIG TOOL KIT POCKETHOLE FACE FRAME

  • Vancouver, Washington, United States
  • Jan 30th
136” SPANEVELLO Double-End Tenoner; 6 Heads; Italy

136” SPANEVELLO Double-End Tenoner; 6 Heads; Italy

  • Casa Grande, Arizona, United States
  • Jan 30th
5Pcs CED 4mm Single Flute Bits Carbide CNC Router Tools CEL 25mm

5Pcs CED 4mm Single Flute Bits Carbide CNC Router Tools CEL 25mm

  • Shanghai, China
  • Jan 30th
5X 4mm Carbide CNC Router Bits Single Flute Tools 22mm

5X 4mm Carbide CNC Router Bits Single Flute Tools 22mm

  • shang hai, China
  • Jan 30th
Amana Tool 54260 Molding Router Bit 1-5/8" Diameter 1-1/8" Cut 1/2" Shank New

Amana Tool 54260 Molding Router Bit 1-5/8" Diameter 1-1/8" Cut 1/2" Shank New

  • United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies