+ Post new Ad
Walter Titex 20 mm solid carbide drill with internal cooling (A3999XPL-20), US $97 – Picture 0
Walter Titex 20 mm solid carbide drill with internal cooling (A3999XPL-20), US $97 – Picture 0

Walter Titex 20 Mm Solid Carbide Drill With Internal Cooling (a3999xpl-20)

US $97

  • Schweinfurt,Bayern, Germany, Germany
  • Feb 26th
Open on mobile:
QR code
You are purchasing...     1 pcs. Walter Titex 20 mm solid carbide drill with internal cooling (A3999XPL-20) Please note: Delivery times are transit times and relate only to the shipping.  The delay by customs import is not considered. Check out the photos! If you have any other questions, give us a call or e-mail. Europower GmbH has a large selection of products listed, please check out our other items in this category by visiting our page!   Data-Sheet:         All Dimensions are metric. Please note: Delivery times are transit times and relate only to the shipping. The delay by customs import is not considered.   PAYMENT   Please confirm your mailing address with payment, otherwise I will mail your item to your address in E-bay registration and itA?A?A?a€sA¬A?a€zA?s your responsibility to be correct, not mine.   We ship promptly within 24 hrs after receiving your payment.     Returns   If You are unsatisfied for any reason please contact us to discuss possible solutions or arrange a return of your item.  We strive to maintain 100% customer satisfaction.   Contact   If you need detailed information about our stock items or if you have any questions or comments regarding your purchase, please contact us at:   info@wendeplatten-eu.com        Information about our stock items or if you have any questions or comments regarding your purchase, please contact us at: info@wendeplatten-eu.com
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
MPN (A3999XPL-20)
Brand Walter Titex

Directions

Similar products from Solid Carbide Drill Bits

Kennametal WIDIA 3/8" Solid Carbide Coolant Fed Drill 8xD TiALN (VDS403A09525)

Kennametal WIDIA 3/8" Solid Carbide Coolant Fed Drill 8xD TiALN (VDS403A09525)

  • Round Lake, Illinois, United States
  • Feb 26th
Kennametal WIDIA 3/8" Solid Carbide Coolant Fed Drill 5xD TiALN (VDS402A09525)

Kennametal WIDIA 3/8" Solid Carbide Coolant Fed Drill 5xD TiALN (VDS402A09525)

  • Round Lake, Illinois, United States
  • Feb 26th
Kennametal WIDIA 3/8" Solid Carbide Coolant Fed Drill 5xD AlCrN (TDS412A09525)

Kennametal WIDIA 3/8" Solid Carbide Coolant Fed Drill 5xD AlCrN (TDS412A09525)

  • Round Lake, Illinois, United States
  • Feb 26th
YG-1 D5417 Carbide jobber-drill-Bit Uncoated Finish Straight Shank Slow Spira

YG-1 D5417 Carbide jobber-drill-Bit Uncoated Finish Straight Shank Slow Spira

  • United States
  • Feb 26th
YG-1 DGE43 Carbide Dream Drill Bit with Coolant Holes TiAlN Finish Straight Sh

YG-1 DGE43 Carbide Dream Drill Bit with Coolant Holes TiAlN Finish Straight Sh

  • United States
  • Feb 26th
YG-1 DH500 Carbide Dream Drill Bit TiAlN Finish Straight Shank Slow Spiral 1

YG-1 DH500 Carbide Dream Drill Bit TiAlN Finish Straight Shank Slow Spiral 1

  • United States
  • Feb 26th
Precorp, solid carbide, Drill bit, size 11, ( 0.191" ), New

Precorp, solid carbide, Drill bit, size 11, ( 0.191" ), New

  • Maryland Heights, Missouri, United States
  • Feb 26th
Brand New Hertel Solid Carbide End Mills-a lot of 11

Brand New Hertel Solid Carbide End Mills-a lot of 11

  • Bridgewater, Massachusetts, United States
  • Feb 26th
Walter Titex 13 mm solid carbide drill with internal cooling (A3999XPL-13)

Walter Titex 13 mm solid carbide drill with internal cooling (A3999XPL-13)

  • Schweinfurt,Bayern, Germany, Germany
  • Feb 26th
Walter Titex 12.5 mm solid carbide drill with internal cooling (A3985TFL-12.5)

Walter Titex 12.5 mm solid carbide drill with internal cooling (A3985TFL-12.5)

  • Schweinfurt,Bayern, Germany, Germany
  • Feb 26th
Walter Titex 14.2 mm solid carbide drill with internal cooling (A3985TFL-14,2)

Walter Titex 14.2 mm solid carbide drill with internal cooling (A3985TFL-14,2)

  • Schweinfurt,Bayern, Germany, Germany
  • Feb 26th
Walter Titex 13.5 mm solid carbide drill with internal cooling (A3999XPL-13.5)

Walter Titex 13.5 mm solid carbide drill with internal cooling (A3999XPL-13.5)

  • Schweinfurt,Bayern, Germany, Germany
  • Feb 26th
BRAND NEW Lot of 12 Dream Drills 3XD TiAIN Carbide 5.5x28x66 5.5mm DH404055

BRAND NEW Lot of 12 Dream Drills 3XD TiAIN Carbide 5.5x28x66 5.5mm DH404055

  • Cortland, Illinois, United States
  • Feb 26th
BRAND NEW Lot of 7 Dream Drills 3XD TiAIN Carbide 7.5x34x74 7.5mm DH404075

BRAND NEW Lot of 7 Dream Drills 3XD TiAIN Carbide 7.5x34x74 7.5mm DH404075

  • Cortland, Illinois, United States
  • Feb 26th
BRAND NEW Lot of 11 Dream Drills 8XD TiAIN Carbide 4.4x6.0x43x81 4.4mm DH453044

BRAND NEW Lot of 11 Dream Drills 8XD TiAIN Carbide 4.4x6.0x43x81 4.4mm DH453044

  • Cortland, Illinois, United States
  • Feb 26th
Brand new Accupro Carbide Spot Drill point 90 Deg.

Brand new Accupro Carbide Spot Drill point 90 Deg.

  • United States
  • Feb 26th
1/4" 4 FLUTE BALL ENDMILL SWIFTCARB EDP# GM02504BU003BOOM

1/4" 4 FLUTE BALL ENDMILL SWIFTCARB EDP# GM02504BU003BOOM

  • Meridian, Idaho, United States
  • Feb 25th
Carbide Drill Bit Sumitomo

Carbide Drill Bit Sumitomo

  • United States
  • Feb 25th
Precision Carbide 1.06 mm Micro Drill Dental Circuit Board Solid Machinist Tool

Precision Carbide 1.06 mm Micro Drill Dental Circuit Board Solid Machinist Tool

  • Yorktown, Virginia, United States
  • Feb 25th
Model RSC-375-2 SOLID CARBIDE 60° ENGRAVING TOOL by Micro 100 - double end

Model RSC-375-2 SOLID CARBIDE 60° ENGRAVING TOOL by Micro 100 - double end

  • Glendale, Arizona, United States
  • Feb 25th

People who viewed this item also vieved

Quality Guarantee 1 pcs Straight Shank HSS Twist Drill Bits Dia 8.6 mm(.3386)

Quality Guarantee 1 pcs Straight Shank HSS Twist Drill Bits Dia 8.6 mm(.3386)

  • CN, China
  • Jan 30th
Reduced Shank Twist Drill Bit " Champion" 35/64"

Reduced Shank Twist Drill Bit " Champion" 35/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Reduced Shank Twist Drill Bit 27/32"

Reduced Shank Twist Drill Bit 27/32"

  • Coventry, Rhode Island, United States
  • Jan 30th
LOT OF 5 DREAM DRILLS 17/64" TIALN COATED

LOT OF 5 DREAM DRILLS 17/64" TIALN COATED

  • Rochester, New Hampshire, United States
  • Feb 14th
5/32" Taper Length Straight Shank M42 Cobalt Drill BIT Made in USA

5/32" Taper Length Straight Shank M42 Cobalt Drill BIT Made in USA

  • Los Angeles, California, United States
  • Feb 14th
1/4" Taper Length Straight Shank Cobalt Drill PTD Made in USA

1/4" Taper Length Straight Shank Cobalt Drill PTD Made in USA

  • Los Angeles, California, United States
  • Feb 14th
9 MORSE STYLE DRILL BITS LOT OF 9 FOR ONE MONEY

9 MORSE STYLE DRILL BITS LOT OF 9 FOR ONE MONEY

  • Milan, Michigan, United States
  • Feb 16th
6 vintage Drill Drift Keys (2 ETM #4&#1)& #2/#3/#4 unmarked look at pics please

6 vintage Drill Drift Keys (2 ETM #4&#1)& #2/#3/#4 unmarked look at pics please

  • Ann Arbor, Michigan, United States
  • Feb 16th
Precision Twist Drill - 2.25 inch, 2 1/4 inch, Taper Shaft Drill Bit, 18 in. OAL

Precision Twist Drill - 2.25 inch, 2 1/4 inch, Taper Shaft Drill Bit, 18 in. OAL

  • Oneida, New York, United States
  • Feb 16th
880 D2200L25-05 SANDVIK CoroDrill

880 D2200L25-05 SANDVIK CoroDrill

  • Windsor, Connecticut, United States
  • Feb 17th
SANDVIK COROMANT R840-1190-70-A1A 1220 Coolant Fed Drill

SANDVIK COROMANT R840-1190-70-A1A 1220 Coolant Fed Drill

  • Rockford, Illinois, United States
  • Feb 17th
SPINDKOOL 33 BIODEG MIST CUTTING FLUID COOLANT 5GAL

SPINDKOOL 33 BIODEG MIST CUTTING FLUID COOLANT 5GAL

  • Vallejo, California, United States
  • Feb 17th
MDS5625MV Screw Machine Length Drill 0.5625in

MDS5625MV Screw Machine Length Drill 0.5625in

  • Lawrenceville, Georgia, United States
  • Feb 26th
HERTEL Cobalt Screw Machine Drill Bits #32 0.1160" 135 Deg TiAlN USA [797]

HERTEL Cobalt Screw Machine Drill Bits #32 0.1160" 135 Deg TiAlN USA [797]

  • Saint Louis, Missouri, United States
  • Feb 26th
HERTEL Indexable Turning Toolholder MTJNRS163 1" x 1" x 6" [1849]

HERTEL Indexable Turning Toolholder MTJNRS163 1" x 1" x 6" [1849]

  • Saint Louis, Missouri, United States
  • Feb 26th
Huot Drill Index 1/16 to 1/2 by 1/64 made in USA

Huot Drill Index 1/16 to 1/2 by 1/64 made in USA

  • Raleigh, North Carolina, United States
  • Mar 2nd
"ATM" Twist Drill Bits, Size # 15, lot of 11 pcs

"ATM" Twist Drill Bits, Size # 15, lot of 11 pcs

  • Coventry, Rhode Island, United States
  • Mar 2nd
"ATM" Twist Drill Bits, #12 Size, lot of 9 pcs

"ATM" Twist Drill Bits, #12 Size, lot of 9 pcs

  • Coventry, Rhode Island, United States
  • Mar 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies