+ Post new Ad
Walter-Titex 7/16",140 Degree Drill Point Angle,Spiral Flute Mfr Part #:5537219, US $130 – Picture 0
Walter-Titex 7/16",140 Degree Drill Point Angle,Spiral Flute Mfr Part #:5537219, US $130 – Picture 0

Walter-titex 7/16",140 Degree Drill Point Angle,spiral Flute Mfr Part #:5537219

US $130

  • Nelsonville, Ohio, United States
  • Jun 21st
Open on mobile:
QR code
Walter-Titex - 7/16 Inch, 140 Degree Drill Point Angle, Spiral Flute, Screw Machine Drill Bit Solid Carbide, Double Coated, 55mm Flute Length, 102mm Overall Length Features and Benefits Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials. Spiral flutes are constructed of a higher flute angle to remove chips easier. Specs Drill Bit Size (Decimal Inch) 0.4375 Drill Bit Size (Inch) 7/16 Drill Point Angle 140 Drill Bit Material Solid Carbide Drill Bit Finish/Coating Double Coating Flute Type Spiral Cutting Direction Right Hand Shank Type Straight Coolant Through Coolant Through Flute Length (mm) 55.00 Flute Length (Decimal Inch) 2.1654 Overall Length (mm) 102.00 Overall Length (Decimal Inch) 4.0158 Flute Length x Diameter Ratio 3xD Point Type X-treme Plus Shank Diameter (mm) 12.00 Shank Diameter (Decimal Inch) 0.4724 Specification Designation DIN Maximum Drilling Depth (mm) 40.00 Maximum Drilling Depth (Decimal Inch) 1.5748 Spiral Type Regular Spiral Shank Length (mm) 45.00 Shank Length (Decimal Inch) 1.7717 Threaded Shank (Yes/No) No Number of Flutes 2 Web Configuration Tapered Drill Bit Diameter Tolerance (mm) m7 Drill Tip Finish/Coating Double Coating Specification Number DIN 6535HA; DIN 6537K Web Thinning Web-Thinned Material Grade K30F Series/List A3289DPL Length Type Stub

Directions

Similar products from Solid Carbide Drill Bits

Precision Twist Solid Carbide Letter "R" Drill

Precision Twist Solid Carbide Letter "R" Drill

  • Fort Worth, Texas, United States
  • Jun 23rd
11/32 Drill

11/32 Drill

  • Krum, Texas, United States
  • Jun 23rd
460.1-0560-028A1-XM GC34CoroDrill® 460 solid carbide drill

460.1-0560-028A1-XM GC34CoroDrill® 460 solid carbide drill

  • Coamo, Puerto Rico, United States
  • Jun 21st
NEW KENNAMETAL SOLID CARBIDE HEC375S4088 KC635M .375 ENDMILL

NEW KENNAMETAL SOLID CARBIDE HEC375S4088 KC635M .375 ENDMILL

  • Coamo, Puerto Rico, United States
  • Jun 21st
Morse 16097 - 1454 Core Drill #4Mt 4F 1-5/32"

Morse 16097 - 1454 Core Drill #4Mt 4F 1-5/32"

  • Murphy, North Carolina, United States
  • Jun 21st
Sumitomo 9.35mm Solid Carbide .3680 MDS3680LHV SC COOLANT THRU DRILL

Sumitomo 9.35mm Solid Carbide .3680 MDS3680LHV SC COOLANT THRU DRILL

  • Athens, Georgia, United States
  • Jun 21st
1/4" Tungsten Carbide Single Cut Grinding Burr 1/8" Shank Cone Shape Fits Dremel

1/4" Tungsten Carbide Single Cut Grinding Burr 1/8" Shank Cone Shape Fits Dremel

  • Fenton, Missouri, United States
  • Jun 21st
1/4" Tungsten Carbide Single Cut Grinding Burr 1/8" Cylinder Shape Fits Dremel

1/4" Tungsten Carbide Single Cut Grinding Burr 1/8" Cylinder Shape Fits Dremel

  • Fenton, Missouri, United States
  • Jun 21st
.1015" #38 CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT

.1015" #38 CARBIDE SCREW MACHINE LENGTH DRILL 135d SPLIT PT

  • Petaluma, California, United States
  • Jun 21st
ISCAR DCM-0591-177-075A-3D * 3232005 2010 Carbide Indexable Drill

ISCAR DCM-0591-177-075A-3D * 3232005 2010 Carbide Indexable Drill

  • Murphy, North Carolina, United States
  • Jun 21st
SOLID CARBIDE DRILL 19/64" DIAM(.2969")x2-5/16" FL LGTH 5-7/16"OAL NEW USA$15.00

SOLID CARBIDE DRILL 19/64" DIAM(.2969")x2-5/16" FL LGTH 5-7/16"OAL NEW USA$15.00

  • North Tonawanda, New York, United States
  • Jun 21st
Walter-Titex - 1/2", 140 Degree Drill Point Angle, Spiral Flute, P/N# 5537234

Walter-Titex - 1/2", 140 Degree Drill Point Angle, Spiral Flute, P/N# 5537234

  • Nelsonville, Ohio, United States
  • Jun 21st
scrap carbide inserts 7.5 Lbs

scrap carbide inserts 7.5 Lbs

  • Lakeside, California, United States
  • Jun 21st
NEW SECO DRILL CROWN SD100-18.65-P

NEW SECO DRILL CROWN SD100-18.65-P

  • Hesperia, California, United States
  • Jun 21st
SOLID CARBIDE DRILL LETTER "N"(.302")DIA / 1/4"3 FLATTED SHANK TSC USA NEW$14.00

SOLID CARBIDE DRILL LETTER "N"(.302")DIA / 1/4"3 FLATTED SHANK TSC USA NEW$14.00

  • North Tonawanda, New York, United States
  • Jun 21st
SOLID CARBIDE DRILL LETTER "N"(.302)DIAM 3 FLATS ON SHANK TSC USA NEW $16.00

SOLID CARBIDE DRILL LETTER "N"(.302)DIAM 3 FLATS ON SHANK TSC USA NEW $16.00

  • North Tonawanda, New York, United States
  • Jun 21st
NEW MORSE CUTTING TOOLS CORE DRILL 7/8 #3 EDP 16088 TAPER SHANK BLACK OXIDE

NEW MORSE CUTTING TOOLS CORE DRILL 7/8 #3 EDP 16088 TAPER SHANK BLACK OXIDE

  • Hesperia, California, United States
  • Jun 21st
SGS - 1/8 Inch Diameter, 1/2 Inch Length of Cut, 4 Flutes, Solid Carbide

SGS - 1/8 Inch Diameter, 1/2 Inch Length of Cut, 4 Flutes, Solid Carbide

  • Nogales, Arizona, United States
  • Jun 21st
SGS - 3/16 Inch Diameter, 9/16 Inch Length of Cut, 2 Flutes, Solid Carbide Singl

SGS - 3/16 Inch Diameter, 9/16 Inch Length of Cut, 2 Flutes, Solid Carbide Singl

  • Nogales, Arizona, United States
  • Jun 21st
SGS - 1/4 Inch Diameter, 3/4 Inch Length of Cut, 4 Flutes, Solid Carbide Single

SGS - 1/4 Inch Diameter, 3/4 Inch Length of Cut, 4 Flutes, Solid Carbide Single

  • Nogales, Arizona, United States
  • Jun 21st

People who viewed this item also vieved

Starbore Cutter 11/16" Coolant Feed 12-5/8 Inches Long

Starbore Cutter 11/16" Coolant Feed 12-5/8 Inches Long

  • New Haven, Indiana, United States
  • Jan 30th
63/64" HS UNION TWIST DRILL (UTD) BIT COOLANT FED Made in USA

63/64" HS UNION TWIST DRILL (UTD) BIT COOLANT FED Made in USA

  • Elizabethtown, Pennsylvania, United States
  • Jan 30th
KOOL MIST Cooling System Unit only - Model : 60M12

KOOL MIST Cooling System Unit only - Model : 60M12

  • Moscow, Idaho, United States
  • Jan 30th
aMachinists 12/4 BUY NOW USA 19/32 MT2 Drill

aMachinists 12/4 BUY NOW USA 19/32 MT2 Drill

  • Lutz, Florida, United States
  • Jan 30th
5 PCS TITEX PLUS 8.9MM TWIST DRILLS, TIN COATED .338 DIA 5" LENGTH "NEW"

5 PCS TITEX PLUS 8.9MM TWIST DRILLS, TIN COATED .338 DIA 5" LENGTH "NEW"

  • Lincolnton, North Carolina, United States
  • Jan 30th
CLEVELAND TWIST DRILLS SM COBALT 25/64" HSS ( 0.3906" ) P/N C14709 ** 8 PCS ***

CLEVELAND TWIST DRILLS SM COBALT 25/64" HSS ( 0.3906" ) P/N C14709 ** 8 PCS ***

  • Blythewood, South Carolina, United States
  • Jan 30th
Interstate Jobber Length Drill Bits Size M2.25 Drill Bit Size 0.0886 Lot of 12

Interstate Jobber Length Drill Bits Size M2.25 Drill Bit Size 0.0886 Lot of 12

  • New Bedford, Massachusetts, United States
  • Jan 30th
Lot of 35 Union Butterfield Shank Twist Drills, Parabolic Flute, Jobbers Length

Lot of 35 Union Butterfield Shank Twist Drills, Parabolic Flute, Jobbers Length

  • Fort Wayne, Indiana, United States
  • Jan 30th
Guhring GT100 HSS 153996 LDS-5 High Speed Steel Drill Bit 11.11mm 0.4375"

Guhring GT100 HSS 153996 LDS-5 High Speed Steel Drill Bit 11.11mm 0.4375"

  • Leander, Texas, United States
  • Jan 30th
5/32 HSS Worm Pattern Drill 4.65"OAL SKF Brand- Qty 9

5/32 HSS Worm Pattern Drill 4.65"OAL SKF Brand- Qty 9

  • Elk River, Minnesota, United States
  • Jan 30th
.3135 Dia 4FL Left Hand Spiral Tungsten Carbide Tipped Reamer Spd-E-Cut 1pc

.3135 Dia 4FL Left Hand Spiral Tungsten Carbide Tipped Reamer Spd-E-Cut 1pc

  • Trenton, Michigan, United States
  • Jan 30th
.408 Dia Jobber Length TCT Drill CLT Bright Koolcarb Brand 1pc

.408 Dia Jobber Length TCT Drill CLT Bright Koolcarb Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
No 37 screw machine 135 degree drill bits pack of 12 HD Cob USA

No 37 screw machine 135 degree drill bits pack of 12 HD Cob USA

  • Punta Gorda, Florida, United States
  • Jan 30th
50-PCS 13/64" SCREW MACHINE HS DRILL BITS, NY-USA,NOS

50-PCS 13/64" SCREW MACHINE HS DRILL BITS, NY-USA,NOS

  • McKee, Kentucky, United States
  • Jan 30th
Accurpo, 01349984, 35/64", TiALN, Cobalt, Parabolic Screw Machine Drill Bit

Accurpo, 01349984, 35/64", TiALN, Cobalt, Parabolic Screw Machine Drill Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
UTD 1-39/64" Drill Bit, 4MT Shank

UTD 1-39/64" Drill Bit, 4MT Shank

  • Westville, New Jersey, United States
  • Jan 30th
UTD 1-11/32" Drill Bit, 4 Morse Taper

UTD 1-11/32" Drill Bit, 4 Morse Taper

  • Westville, New Jersey, United States
  • Jan 30th
UTD 1-9/16" Drill Bit, MT4 Shank

UTD 1-9/16" Drill Bit, MT4 Shank

  • Westville, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies