The item here is a new ceramic fiber strip (tape) made by ceramic fiber textiles and reinforced with thin glass fibers. It has much higher tensile strength than blankets. The strip has a dimension of 25' x 2" x 1/8".
The item here is a lightweight insulating castable. Water will be added on site and mixed, and then shaped via casting to make a concrete-like material, which serves as a strong, rigid thermal insulation. The castables can be used as very thermally efficient insulation to a dense refractory lining.
The item is a carton of insulating firebricks (12 pieces) with a classification temperature of 2300°F, a density of 34 lb./ft^3 and a dimension of 9" x 4.5" x 2.5" for each firebrick. The firebricks are made from refractory clays, but don’t contain any organic materials. Because of their porous structure, the materials have excellent thermal insulation properties.
Hello Folks, Today we have an Atlas # 10D-34 Tailstock Ram Screw with Washer. It is in good, used condition, with No damages, please see all pics. Please check out our Ebay store for other great buys.
ORIGINAL ATLAS 10/12 In. LATHE PART No. 9-179, 9-14, 9-155 CARRIAGE LOCK/ CLAMP SCREW AND WASHER The photos are accurate to each description and exact to what you will receive.
You will get GENERAL No 308 6" ATLAS TOOL CO NEW YORK TEMPERED NO 19 6" STAINLESS STEEL NO 46F 6" PRECISION PARTS CO 6' US STD. SHEET STL. GAUGE 3 3/4 X 2 3/8 PIECE WITH SHAPES STANDARD SCREW WASHER NUT GAUGE K-D TOOLS K-D NO 161 FEELER SAWYER THREAD PITCH GAUGE W.
Used - Fairly Good Condition - Devlieg Microbore NMTB40 3-7/8" to 5-5/8" Boring Bar 4-3/4 Deep 5140 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
up for auction (2 used toolholder #2527 ) (6 blades) ( 4 screw ) (4 end washer )( assorted slotted spacers ) for artos automatic wire stripper type-CS-6 the item may have some signs of cosmetic wear but is in good operational conditions. pleas check pictures. IF FOR ANY REASON YOUR NOT HAPPY WITH THE PURCHASE.
Fits t slots from 1 inch to 1 1/4 inch, 5.5 inch bolt. Comes with everything, nut, washer, clamp, and adjusting screw Have 7 availible New never used, came from my old diecast shop.
Aluminum Heater Block for 3D Printers Cartridge Clamp Type Block Fits E3D Makerbot hexagon and others with similar block. M6x1 thread for heat break and M6 Thread for Nozzle By having metal to metal contact, you will maximize heat transfer of cartridge to melt filament. Using foil and cements actually impedes heat transfer.
(Blue) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.
(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.
(2) (Left and Right) (Red) Makerbot Replicator 1 & 2 Dual Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement:I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.
May be used as a spindle-adapter for a wood lathe from LatheCity Included: Morse Taper #2 (MT2) to 1"-8 TPI (x1.5" thread length), steel, 1/4-20 drawbar, RH threads + nut and washer
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
