Watson Mcdaniel Steam Trap 1031s 1/2" -dry Cleaning-laundry-inverted Bucket Trap

US $65.00

Richmond, Virginia, United States
Jan 30th

Open on mobile:
QR code

1031S - 1/2" The 1031S is equipped with a small protection screen to guard against dirt in the steam system. It is a more economical alternative than the 1041 which has a full-port strainer. Specifically designed for use in laundries. Available in 125 PSIG rating only. TYPICAL APPLICATIONS DRIP, TRACER, PROCESS: The IB Series inverted bucket traps are available in several sizes and capacity ranges. Inverted bucket traps can handle superheated steam when a check valve is used. The smaller traps are primarily used in drip and tracer applications. These traps are also used on unit heaters, laundry equipment, and other process equipment where slow start-up due to poor air handling capability can be tolerated. Larger sizes are used on process equipment; however, since bucket traps have limited air handling capability, F&T traps are the preferred choice. HOW IT WORKS When there is condensate in the system, the inverted bucket inside the steam trap sits on the bottom of the trap due to its inherent weight. This allows condensate to enter the trap and to be discharged through the seat orifice located at the top. When steam enters the trap, the bucket floats to the surface and closes off the discharge valve containing the steam in the system. Eventually steam is bled off through a small hole in the top of the bucket causing the bucket to sink which repeats the cycle. FEATURES • Water hammer resistant • Suitable for superheated steam (use internal check valve option to eliminate loss of prime) • In-line repairability is simplified by having all internals attached to the cover • Valve & seat are at the top of the trap making it less sensitive to dirt • All stainless steel internals with hardened valve & seat SAMPLE SPECIFICATION The steam trap shall be of an inverted bucket trap design. Trap body and cover shall be of cast iron construction with all stainless steel internals and hardened seat and disc. MAINTENANCE All working components can be replaced with the trap body remaining in-line. The repair kit for the traps contain a lever and seat assembly with gasket. With superheated steam, a check valve must be installed at inlet of trap. For full maintenance Multiple Item Shipping Discounts Also Available in 3/4". We carry a full line of regulators as well. United Brass and Watson McDaniel Any questions please call. 1-800-767-1946

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Watson McDaniel
MPN	1031-S
Model	1031-S