Wcb High Pressure Bolted Sanitary Clamps 2" 119-271 13mhp Process Equipment New

US $22.95

  • Springfield, Tennessee, United States
  • Jan 30th
1931F6E.1.64New WCB Flow Products (a Division of SPX Process Equipment), 2" High Pressure Sanitary Clamps, Part Number 119-271, Series 13MHP.  Each bid quantity is for One (1) Clamp.  You may bid / buy any number, up to the total quantity available above. These were received in a load of salvage freight recently, and they are brand new in the the original factory packaging.  All are sealed, except for the one we opened to take pictures.  Material is 304 Stainless Steel, with Silicone Bronze nuts to prevent galling.  Pressure rating is 900 PSI at 70F and 830 PSI at 250F.  Just the thing for that back yard distillery you've been designing.  These big heavy clamps run close to $40 apiece from online distributors, so get them cheap while they last. According to the manufacturer: 13MHP 2" T304 Strong, cast 304SS clamp with SS hex screws and silicone bronze nuts to prevent galling. Note: Pressure ratings are based on the following parameters: Nominal wall thickness (.065 1.5”-3”, .083 4”), use of elastomer type gasket*, weld ferrules, properly aligned and assembled joints (nuts torqued to 20 ft. lb.) and the absence of water hammer or shock loads. Remember, use the Clamped Union pressure rating above for safe, correct pipeline design. Pressure ratings of the clamp alone are generally higher yet do not take into account the full clamped assembly with gasket. PTFE gaskets are not recommended for use with 13MHP clamps. Consult factory for Solid PTFE and PTFE Envelope Gasket information. Higher pressure ratings for the clamp alone are available upon request.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand WCB Flow Products
MPN 119-271
Model 13MHP
SELLER LOCATION USA

Directions

Similar products from Fixtures

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies