Weco-em3218t 5 Hp, 1760 Rpm Baldor Electric Motor Same As Em3218t 36g548s270g8

US $3900

  • New Britain, Connecticut, United States
  • Nov 21st
Catalog Number:  EM3218T Description:  5HP,1750RPM,3PH,60HZ,184T,3639M,OPSB,F1 Ship Weight:  85 lbs.   Specifications: EM3218T SPEC. NUMBER:  36G548S270G1 CATALOG NUMBER:  EM3218T FL AMPS:  14-13.2/6.6 208V AMPS:  14 BEARING-DRIVE-END:  6206 BEARING-OPP-DRIVE-END:  6205 DESIGN CODE:  B DOE-CODE:  010A FL EFFICIENCY:  89.5 ENCLOSURE:  OPSB FRAME:  184T HERTZ:  60 INSULATION-CLASS:  F KVA-CODE:  J SPEED [rpm]:  1750 OUTPUT [hp]:  5 PHASE:  3 POWER-FACTOR:  80 RATING:  40C AMB-CONT SERIAL-NUMBER:  -- SERVICE FACTOR:  1.15 VOLTAGE:  208-230/460 SHAFT SIZE IS  1- 1/8" Product Nameplate Data : Rated Output 5 HP Hertz 60 NEMA Nom. Eff. 89.5 Volts 208-230/460 Phase 3 Power Factor 80 Full Load Amps 14-13.2/6.6 NEMA Design Code B Service Factor 1.15 Speed 1750 LR KVA Code J Rating - Duty 40C AMB-CONT   Performance Data:   (Typical performance - Not guaranteed values) General Characterstics at 460 V, 60 Hz, 5 HP Full Load Torque 15 LB-FT Starting Current 44.8 Amps Start Configuration DOL No-Load Current 2.97 Amps Break Down Torque 44.8 LB-FT Line-line Resistance @ 25° C 2.632 Ohms Pull-Up Torque 25.5 LB-FT Temperature Rise, C @ FL (in deg) 44 Locked-Roter Torque 30.1 LB-FT Temp. Rise @ S.F. Load (in deg) 56   Load Characteristics at 460 V, 60 Hz , 5 HP % of Rated Load 25 50 75 100 125 150 S.F. Power Factor 42 64 75 80 83 84 82 Efficiency 85.4 89.7 90.2 89.5 88.2 86.4 88.7 Speed (rpm) 1789.2 1778.5 1766.9 1753.8 1739.5 1722.1 1745 Line Amperes 3.33 4.14 5.26 6.59 8.05 9.68 7.47   ·         Heavy duty frames ·         Ball bearings ·         Moisture resistant ISR® (Inverter Spike Resistant) copper windings ·         Low-loss electrical lamination grade steel ·         Three year warranty. ·         Typical applications include operations where continuous or frequent duty is required. Super-E Motors are designed to conserve energy over extended time periods. Inverter rated per NEMA MG1 Part 31.4.4.2. Suitable for variable torque applications and 20:1 constant torque speed range with properly sized and adjusted variable frequency drives.   FREE STANDARD UPS SHIPPING FOR LOWER 48 STATES!

Directions

Similar products from Motors with Power Over 10 HP

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies