+ Post new Ad
Wedge Type Tool Post Holder 12In Swing CNC Quick Change Lathe Metalworking Kits, US $175.99 – Picture 0
Wedge Type Tool Post Holder 12In Swing CNC Quick Change Lathe Metalworking Kits, US $175.99 – Picture 0

Wedge Type Tool Post Holder 12in Swing Cnc Quick Change Lathe Metalworking Kits

US $175.99

  • Weinan, China
  • May 15th
Open on mobile:
QR code
Wedge Type Tool Post Holder 12In Swing CNC Quick Change Lathe Metalworking Kits DescriptionAXA Size DMC-250-111 Wedge Tool Post up to 12 Inch Swing GIB Type CNC Quick Change Lathe Tools Holder 250-111 AXA Size Wed ge Type Tool Post Suitable for lathe center height 0.6 - 1.75" The tool post comes with a blank T-Nut plate, the customer have to do some machining work to make it fit into their own specific lathe T slot Specification: Model DMC-250-111 Type Wedge type Material 65Mn steel Lathe Swing diameter 12 Inch Size: A (in) 2-1/2 B (in) 3-7/8 C (in) 2-1/4 D (in) 9/16 Features: For use on lathes with up to 12" swing (defined as the diameter that can be turned over the bed). Precision-engineered to assure repetitive accuracy. Quickly and easily installed on an engine or turret lathe for a wide range of operations. Slash Your Setup Time- instant changing from one operation to another. Fully interchangeable with Aloris, Dorian, Phase II, Yuasa, and most other manufacturer components (AXA series only). All working parts precision ground and hardened. Completely sealed for maintenance free operation. Turning: The unequaled rigidity of this toolpost and holders (also available) insure smoother turning without chatter or vibration. Rigid wedge design, easily centered. Suitable for tool holder 250-101, 250-102, 250-104, 250-107, 250-110, etc. Tool post holder (not included in the package):   Package Included: 1 x DMC-250-111 Wedge Tool Post
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model 9889557012
Custom Bundle No
Modified Item No
Brand Unbranded
MPN 9889557033
Country/Region of Manufacture China
Tool Post Type Quick Change Tool Post - Wedge Type
UPC Does not apply

Directions

Similar products from Fast Change Tools

Phase 2 Quick Change Tool Post Stock No.250-222

Phase 2 Quick Change Tool Post Stock No.250-222

  • Show Low, Arizona, United States
  • May 25th
Tooling For Mini Lathe Quick Change Tool Kit Post&Holders Tool Accessories New

Tooling For Mini Lathe Quick Change Tool Kit Post&Holders Tool Accessories New

  • suzhou, China
  • May 23rd
AXA 250-111 Wedge ToolPost Set For Lathe 6 - 12" Plus 2 Extra Tool Holder

AXA 250-111 Wedge ToolPost Set For Lathe 6 - 12" Plus 2 Extra Tool Holder

  • Maple Heights, Ohio, United States
  • May 22nd
Quick Change Tool Holder Replacement Universal Accessories Durable New

Quick Change Tool Holder Replacement Universal Accessories Durable New

  • suzhou, China
  • May 20th
Aloris Boring Bar Tool Post Holder Series CA No 4D 14 to 20" Lathe Swing CA-4D

Aloris Boring Bar Tool Post Holder Series CA No 4D 14 to 20" Lathe Swing CA-4D

  • Venice, Florida, United States
  • May 20th
PHASE 2 250-402, QUICK CHANGE TOOL HOLDER #2 BORING, TURNING AND FACING HOLDER

PHASE 2 250-402, QUICK CHANGE TOOL HOLDER #2 BORING, TURNING AND FACING HOLDER

  • Union City, California, United States
  • May 20th
4X(6-12 Inch 2 AXA Bo Turning Change Tool Post Facing Holder 250-102 for CNC

4X(6-12 Inch 2 AXA Bo Turning Change Tool Post Facing Holder 250-102 for CNC

  • Pennsylvania, United States
  • May 19th
FREE SHIP! Aloris DA Quick Change Tool Post Set QCTP with holders - DA2 DA8 DA13

FREE SHIP! Aloris DA Quick Change Tool Post Set QCTP with holders - DA2 DA8 DA13

  • Minneapolis, Minnesota, United States
  • May 18th
PAIR OF KWIK SWITCH 200 COLET CHUCKS + COLLETS DOUBLE TAPER

PAIR OF KWIK SWITCH 200 COLET CHUCKS + COLLETS DOUBLE TAPER

  • Pomona, California, United States
  • May 17th
Enco 'CA' Quick Change Combination Knurling and Facing Tool Holder, Nice Holder!

Enco 'CA' Quick Change Combination Knurling and Facing Tool Holder, Nice Holder!

  • Las Vegas, Nevada, United States
  • May 15th
ARMSTRONG QC-4 QUICK CHANGE TOOL POST

ARMSTRONG QC-4 QUICK CHANGE TOOL POST

  • Coffeyville, Kansas, United States
  • May 14th
Armstrong CA-2 Turning, Boring, Facing Tool Holder, w/ Iscar Cut Off Holder

Armstrong CA-2 Turning, Boring, Facing Tool Holder, w/ Iscar Cut Off Holder

  • Las Vegas, Nevada, United States
  • May 14th
Equipment Lathe tool holder Milling Quick change 5pcs 1/4"- 1/2" Practical

Equipment Lathe tool holder Milling Quick change 5pcs 1/4"- 1/2" Practical

  • suzhou, China
  • May 13th
Aloris HES DA1-FT1x1 and DA1 for 1 1/4" Tool Holders 2pcs in LOT

Aloris HES DA1-FT1x1 and DA1 for 1 1/4" Tool Holders 2pcs in LOT

  • Garden Grove, California, United States
  • May 12th
Aloris HES DA1-B-1.50 Tool Holder with 1 1/2" with 4 Reducer Bushings 5pc LOT

Aloris HES DA1-B-1.50 Tool Holder with 1 1/2" with 4 Reducer Bushings 5pc LOT

  • Garden Grove, California, United States
  • May 12th
KDK-150 SERIES QUICK CHANGE LATHE TOOL POST - 15" to 18" SWING

KDK-150 SERIES QUICK CHANGE LATHE TOOL POST - 15" to 18" SWING

  • Colonia, New Jersey, United States
  • Nov 26th
HHIP 3900-5435 KDK-205 Type Master Bar for Boring Bar

HHIP 3900-5435 KDK-205 Type Master Bar for Boring Bar

  • USA, United States
  • Nov 25th
MINI LATHE 4 BIT TOOL HOLDER

MINI LATHE 4 BIT TOOL HOLDER

  • Grand Junction, Colorado, United States
  • Nov 23rd
Aloris CA 30 Indexable Turning Facing Tool

Aloris CA 30 Indexable Turning Facing Tool

  • Carlyle, Illinois, United States
  • Nov 22nd
Phase II 3 jaw 8" Lathe Chuck D1-6 Direct Mount 559-104

Phase II 3 jaw 8" Lathe Chuck D1-6 Direct Mount 559-104

  • Columbus, Ohio, United States
  • Nov 21st

People who viewed this item also vieved

DRILL BIT SLEEVE EXTENSION FOR METALWORKING DRILL BITS LENGTH 12" INPUT 1 1/8"

DRILL BIT SLEEVE EXTENSION FOR METALWORKING DRILL BITS LENGTH 12" INPUT 1 1/8"

  • New Paris, Indiana, United States
  • Jan 30th
DRILL SLEEVE EXTENSION FOR METALWORKING DRILL BITS 17" LENGHT X 1 1/4" INPUT

DRILL SLEEVE EXTENSION FOR METALWORKING DRILL BITS 17" LENGHT X 1 1/4" INPUT

  • New Paris, Indiana, United States
  • Jan 30th
PRECISION AUTOMATIC BORING & FACING HEAD 3/4" CAPACITY W/ 1" STRAIGHT SHANK

PRECISION AUTOMATIC BORING & FACING HEAD 3/4" CAPACITY W/ 1" STRAIGHT SHANK

  • Ellington, New York, United States
  • Jan 30th
FLYNN PRECISION BORING HEAD 1/2" CAPACITY W/ 2MT SHANK

FLYNN PRECISION BORING HEAD 1/2" CAPACITY W/ 2MT SHANK

  • Ellington, New York, United States
  • Jan 30th
NEW KENNAMETAL ERICKSON 1.103" H SERIES TAP COLLET

NEW KENNAMETAL ERICKSON 1.103" H SERIES TAP COLLET

  • Cleveland, Ohio, United States
  • Jan 30th
KATO BT50 TAPPER ADAPTER HOLDER BT50-SA1022-III USED

KATO BT50 TAPPER ADAPTER HOLDER BT50-SA1022-III USED

  • Cary, Illinois, United States
  • Jan 30th
NEW PLANET PRODUCTS 3916-701 MECHANICAL STEEL BUSHING 3/4X1X1-3/8 IN D221299

NEW PLANET PRODUCTS 3916-701 MECHANICAL STEEL BUSHING 3/4X1X1-3/8 IN D221299

  • Delta, Ohio, United States
  • Jan 30th
27 - 1 3/4" OD boring sleeve bushing Assorted CNC lathe tool holder reducer

27 - 1 3/4" OD boring sleeve bushing Assorted CNC lathe tool holder reducer

  • Hudson, Florida, United States
  • Jan 30th
Cat 50 Retention Knob 60 Deg, M24 x 3.0 Threads

Cat 50 Retention Knob 60 Deg, M24 x 3.0 Threads

  • Barberton, Ohio, United States
  • Jan 30th
BILZ SCK1-275 HSK-A100/2 ESX20-BL COLLET CHUCK,ER-20 COLLET,SHANK:HSK A-1

BILZ SCK1-275 HSK-A100/2 ESX20-BL COLLET CHUCK,ER-20 COLLET,SHANK:HSK A-1

  • Euclid, Ohio, United States
  • Jan 30th
ROHM R5 Drill Chuck/Key, 3/4" Shank, JT4 Mount, 3/16" - 3/4" Capacity

ROHM R5 Drill Chuck/Key, 3/4" Shank, JT4 Mount, 3/16" - 3/4" Capacity

  • Hopkinsville, Kentucky, United States
  • Jan 30th
Atlas Craftsman 10/12 Lathe 1/2" Supreme Drill Chuck and Key

Atlas Craftsman 10/12 Lathe 1/2" Supreme Drill Chuck and Key

  • Wildomar, California, United States
  • Jan 30th
HEAVY DUTY INDEXABLE TURNING & FACING TOOL HOLDER MODEL DTGNR-164D 1" SHANK

HEAVY DUTY INDEXABLE TURNING & FACING TOOL HOLDER MODEL DTGNR-164D 1" SHANK

  • Ellington, New York, United States
  • Jan 30th
HEAVY DUTY INDEXABLE TURNING & GROOVING TOOL HOLDER MODEL DDJNR-164C 1" SHANK

HEAVY DUTY INDEXABLE TURNING & GROOVING TOOL HOLDER MODEL DDJNR-164C 1" SHANK

  • Ellington, New York, United States
  • Jan 30th
K6-240CH SUNNEN HONE MANDREL WITH ADAPTER .240" - .245"

K6-240CH SUNNEN HONE MANDREL WITH ADAPTER .240" - .245"

  • Cleveland, Ohio, United States
  • Jan 30th
Sunnen Hone 5G P28 1500WD Lifetime Mandrel: Range = 1.542" - 1.625" Complete

Sunnen Hone 5G P28 1500WD Lifetime Mandrel: Range = 1.542" - 1.625" Complete

  • Scottsdale, Arizona, United States
  • Jan 30th
Valenite metal lathe bit holder LTGR-20 LOC-A-DEX

Valenite metal lathe bit holder LTGR-20 LOC-A-DEX

  • Summerville, South Carolina, United States
  • Jan 30th
small schaublin lathe toolpost

small schaublin lathe toolpost

  • Phillipsburg, New Jersey, United States
  • Jan 30th
ELTE STK-6.5/2 SPINDLE MOTOR 400V 11A 0.35KW 200HZ FOR CNC MILL ROUTER *XLNT*

ELTE STK-6.5/2 SPINDLE MOTOR 400V 11A 0.35KW 200HZ FOR CNC MILL ROUTER *XLNT*

  • Reidsville, North Carolina, United States
  • Jan 30th
Setco 4304BY.21280 Spindle 3000 RPM Reversible Mounting Horizontal Nose Down

Setco 4304BY.21280 Spindle 3000 RPM Reversible Mounting Horizontal Nose Down

  • Middlebury, Indiana, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies