+ Post new Ad
Weldon 1" diameter 45 helix 2 flute 4" length of cut end mill, US $1,200.00 – Picture 0
Weldon 1" diameter 45 helix 2 flute 4" length of cut end mill, US $1,200.00 – Picture 1
Weldon 1" diameter 45 helix 2 flute 4" length of cut end mill, US $1,200.00 – Picture 2
Weldon 1" diameter 45 helix 2 flute 4" length of cut end mill, US $1,200.00 – Picture 0
Weldon 1" diameter 45 helix 2 flute 4" length of cut end mill, US $1,200.00 – Picture 1
Weldon 1" diameter 45 helix 2 flute 4" length of cut end mill, US $1,200.00 – Picture 2

Weldon 1" Diameter 45 Helix 2 Flute 4" Length Of Cut End Mill

US $1,200.00

  • Leesburg, Virginia, United States
  • Jun 9th
Open on mobile:
QR code
Weldon - 1 Inch Diameter, 4 Inch Length of Cut, 2 Flutes, Solid Carbide Single End Square End Mill - Uncoated, 6-1/2 Inch Overall Length, 1 Shank Inch Diameter, Spiral Flute, 45 Helix Angle, Centercutting Brand:  Weldon Mfr Part #:  SKXC32-7B Price:  $1,659.81 brand new Information taken from this link........   http://www.mscdirect.com/browse/tn/?searchterm=skxc+32-7b&hdrsrh=true  
“LIKE NEW”
Primary Application(s) High Volume Machining
MPN skxc 32-7b
Material Carbide
Flutes 2-Flute
Coating None
Helix Angle 45° Helix
End Type Single End
Cutting Diameter 1in.
Brand Weldon
Overall Length 6-1/2in.

Directions

Similar products from End Mills Router & Drill Bits

2MM X 58MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x

2MM X 58MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x

  • --, Hong Kong
  • Jun 9th
1 1/2 In Square End Mill 6 in Cutting Length Regal Cutting Tools

1 1/2 In Square End Mill 6 in Cutting Length Regal Cutting Tools

  • Crystal Lake, Illinois, United States
  • Jun 9th
Kennametal HPHV375S4088CH KCPM15 EDP #4047756 Harvi End Mill

Kennametal HPHV375S4088CH KCPM15 EDP #4047756 Harvi End Mill

  • Atlanta, United States
  • Jun 9th
LARGE LOT METALWORKING MACHINIST MILLING HSS END MILLS BITS TAPS STARRETT WRENCH

LARGE LOT METALWORKING MACHINIST MILLING HSS END MILLS BITS TAPS STARRETT WRENCH

  • Centerburg, Ohio, United States
  • Jun 9th
Lot of 2 1/4" Twist Drill Weldon J9-H55 & HS 862 Made in USA

Lot of 2 1/4" Twist Drill Weldon J9-H55 & HS 862 Made in USA

  • North Adams, Massachusetts, United States
  • Jun 9th
5/16" Twist Drill Standard Tool Co Made in USA Helox End Mill

5/16" Twist Drill Standard Tool Co Made in USA Helox End Mill

  • North Adams, Massachusetts, United States
  • Jun 9th
Machinist Tools

Machinist Tools

  • Van Buren, Arkansas, United States
  • Jun 9th
LOT ( 3 ) DURA MILL CARBIDE 3/8" CHIP BREAKER ROUGHING END MILL ALUMINUM MILLING

LOT ( 3 ) DURA MILL CARBIDE 3/8" CHIP BREAKER ROUGHING END MILL ALUMINUM MILLING

  • Kingman, Arizona, United States
  • Jun 9th
LOT ( 2 ) IMCO CARBIDE 3/8" DOUBLE END MILL MILLING MACHINIST CUTTING TOOL BITS

LOT ( 2 ) IMCO CARBIDE 3/8" DOUBLE END MILL MILLING MACHINIST CUTTING TOOL BITS

  • Kingman, Arizona, United States
  • Jun 9th
LOT ( 2 ) POWDERED METAL 3/4" ROUGHING MILLING END MILL COBALT CUTTING TOOL BITS

LOT ( 2 ) POWDERED METAL 3/4" ROUGHING MILLING END MILL COBALT CUTTING TOOL BITS

  • Kingman, Arizona, United States
  • Jun 9th
WIDIA Hanita Carbide End Mill 3/4" 4 FL TiaIn-LW 3/4" x 1-1/2" x 4" TF4V0519007

WIDIA Hanita Carbide End Mill 3/4" 4 FL TiaIn-LW 3/4" x 1-1/2" x 4" TF4V0519007

  • Senoia, Georgia, United States
  • Jun 9th
WIDIA Hanita TF4V0513005S 1/2x1/2x1x3 TiAIN 4fl Carbide End Mill

WIDIA Hanita TF4V0513005S 1/2x1/2x1x3 TiAIN 4fl Carbide End Mill

  • Senoia, Georgia, United States
  • Jun 9th
Drillco Drill Bit: 5/8,4 FLUTE DOUBLE END END-MILL 5/8"SHANK 5500A (55A140C)

Drillco Drill Bit: 5/8,4 FLUTE DOUBLE END END-MILL 5/8"SHANK 5500A (55A140C)

  • Senoia, Georgia, United States
  • Jun 9th
5 pc- 3 MM DIAMETER, 11 MM LOC, 38 MM OAL 2 FLUTE CARBIDE ENDMILLS

5 pc- 3 MM DIAMETER, 11 MM LOC, 38 MM OAL 2 FLUTE CARBIDE ENDMILLS

  • Adrian, Michigan, United States
  • Jun 9th
2 PC- 1/16" DIAMETER, 1/4" LOC, 1 1/2" OAL 3 FLUTE CARBIDE END MILLS

2 PC- 1/16" DIAMETER, 1/4" LOC, 1 1/2" OAL 3 FLUTE CARBIDE END MILLS

  • Adrian, Michigan, United States
  • Jun 9th
1 PC- 7/32" DIAMETER, 5/8" LOC, 2 1/2" OAL 3 FLUTE CARBIDE END MILL

1 PC- 7/32" DIAMETER, 5/8" LOC, 2 1/2" OAL 3 FLUTE CARBIDE END MILL

  • Adrian, Michigan, United States
  • Jun 9th
1 PC- 8 MM DIAMETER, 32 MM LOC, 100 MM OAL 1 FLUTE CARBIDE END MILL

1 PC- 8 MM DIAMETER, 32 MM LOC, 100 MM OAL 1 FLUTE CARBIDE END MILL

  • Adrian, Michigan, United States
  • Jun 9th
BRAND NEW! KENNAMETAL 5/16" DOUBLE END 4 FLT. CARBIDE END MILLS , TIN , LOT OF 2

BRAND NEW! KENNAMETAL 5/16" DOUBLE END 4 FLT. CARBIDE END MILLS , TIN , LOT OF 2

  • Marietta, Georgia, United States
  • Jun 9th
3 PC- 6MM DIAMETER, 18MM LOC, 65MM OAL 2 FLUTE CARBIDE END MILLS

3 PC- 6MM DIAMETER, 18MM LOC, 65MM OAL 2 FLUTE CARBIDE END MILLS

  • Adrian, Michigan, United States
  • Jun 9th
NOS NIAGARA X-Long 1/2" Dia. x 6" Solid Carbide EM 4F SE End Mill TiALN #M153G

NOS NIAGARA X-Long 1/2" Dia. x 6" Solid Carbide EM 4F SE End Mill TiALN #M153G

  • Perth, Ontario, Canada
  • Jun 9th

People who viewed this item also vieved

Keyway Broach Bushing Guide, Type C, 1 11/32" x 2 1/2", Uncollared, Used

Keyway Broach Bushing Guide, Type C, 1 11/32" x 2 1/2", Uncollared, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Keyway Broach Bushing Guide, Type A, 1/2" x 1 11/16", Uncollared, Used

Keyway Broach Bushing Guide, Type A, 1/2" x 1 11/16", Uncollared, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Kennametal SNMG 322 FF KC5010 Carbide Inserts (5 Inserts) (K919)

Kennametal SNMG 322 FF KC5010 Carbide Inserts (5 Inserts) (K919)

  • Dallas, Texas, United States
  • Jan 30th
Kennametal CNGG 432 FS KC5510 Carbide Finishing Sharp Inserts (QTY of 5) (K926)

Kennametal CNGG 432 FS KC5510 Carbide Finishing Sharp Inserts (QTY of 5) (K926)

  • Dallas, Texas, United States
  • Jan 30th
NIB Kennametal Ceramic Inserts SNG 454T K090 10-Pack

NIB Kennametal Ceramic Inserts SNG 454T K090 10-Pack

  • Hurricane, West Virginia, United States
  • Jan 30th
NIB Kennametal Ceramic Inserts RNG 45T K060 10-Pack

NIB Kennametal Ceramic Inserts RNG 45T K060 10-Pack

  • Hurricane, West Virginia, United States
  • Jan 30th
Diamond Powder ,weight =20,0 gr. 100 cts, 0,25-0 Microns or Mesh 50000.

Diamond Powder ,weight =20,0 gr. 100 cts, 0,25-0 Microns or Mesh 50000.

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
Sprocket Shaper Cutter 36 Teeth 1/4 Pitch .130 Roll

Sprocket Shaper Cutter 36 Teeth 1/4 Pitch .130 Roll

  • South Beloit, Illinois, United States
  • Jan 30th
Lot 1pcs HSS Round Die M3x0.5mm

Lot 1pcs HSS Round Die M3x0.5mm

  • CN, China
  • Jan 30th
Unipunch 8AJ-1 1/4P-LPD C-Frame Punch Tool 1-1/4"

Unipunch 8AJ-1 1/4P-LPD C-Frame Punch Tool 1-1/4"

  • Leander, Texas, United States
  • Jan 30th
Lempco Expansion Reamer Dual Spiral with Pilot 1-3/16”

Lempco Expansion Reamer Dual Spiral with Pilot 1-3/16”

  • Unionville, Pennsylvania, United States
  • Jan 30th
Two only NEW .2495" Diameter Reamers Solid Carbide Fullerton Tool Co. USA

Two only NEW .2495" Diameter Reamers Solid Carbide Fullerton Tool Co. USA

  • British Columbia, Canada
  • Jan 30th
MARVEL No. 81/12 Band saw Pwr. Tilt Head, 1-1/4" Blade (27244)

MARVEL No. 81/12 Band saw Pwr. Tilt Head, 1-1/4" Blade (27244)

  • Cincinnati, Ohio, United States
  • Jan 30th
7' 5" X 3/4" X .035 X 5-8 COMBO MILFORD GOLD DRAGON BI-METAL BAND SAW BLADE

7' 5" X 3/4" X .035 X 5-8 COMBO MILFORD GOLD DRAGON BI-METAL BAND SAW BLADE

  • Pittsburg, California, United States
  • Jan 30th
12 Piece Jobber Length Cobalt #40 Drill Bits - USA - NEW ................(1-1-1)

12 Piece Jobber Length Cobalt #40 Drill Bits - USA - NEW ................(1-1-1)

  • San Antonio, Texas, United States
  • Jan 30th
3/8 6 LOT AR6 C2 TOOL BITS BEST TOOL BITS

3/8 6 LOT AR6 C2 TOOL BITS BEST TOOL BITS

  • Cerritos, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies