US $126.20
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Weldon |
| MSRP | 126.20 | ||
| Model | Weldon | ||
| Location | Tommy R/11.20.13 | ||
| MPN | 58106 | ||
| UPC | Does Not Apply |
Directions
Similar products from End Mills Router & Drill Bits
(Lot of 10) 1/4" Garr Solid Carbide TialN 4 Flute End Mill (B 68)
MhC 1-1/8" Diameter 1-5/8" Length of Cut 2FL HSS End Mill 720-1115
10pcs 4mm 4 Four Flute HSS Aluminium End Mill Cutter CNC Bit
NOS QUALCUT UK 3/4" x 60 Degree Inverted DOVETAIL CUTTER 12mm Shank WRNA.2.2
NOS QUALCUT UK 7/8" x 45 Degree Inverted DOVETAIL CUTTER 12mm Shank WRNA.2.1
AIRCRAFT HSS SINGLE END 2 FLUTE END MILL 1 3/8" CARBIDE TIP UNUSED
NOS QUALCUT UK 7/8" x 45 Degree End Mill DOVETAIL CUTTER 12mm Shank WRNA.2.1
NOS QUALCUT UK 7/8" x 60 Degree End Mill DOVETAIL CUTTER 12mm Shank WRNA.2.1
HARVEY TOOL CARBIDE ENDMILL KEYSEAT CUTTER ALTIN LOT OF 15 TOOLS
NOS QUALCUT UK 1/2" RADIUS Cobalt CORNER ROUNDING CUTTER 1" Screw Shank WRNA411A
NOS SKF UK 1/2" RADIUS CORNER ROUNDING CUTTER End Mill 1" Screwed Shank WRNA411B
OSG HSS-Co Size 12 End Mill 58011 Measures 3" Long 2 Flute 2.600 #1212
HSS-CO 5/8 End Mill Cutting Tool 3.400 with 2 flute #52021 Length 3 3/8" Long
NOS QUALCUT 7/16" Radius CORNER ROUNDING CUTTER 5% Cobalt End Mill WRNA411
Micro 100 BEM-281-03X Dia 9/32 Cut L 3/4 RH 3Flute Carbide End Mill
Melin 1" Dia 4 Flute End Mill with .125 Corner Radius- never Used!!!
1 1/8" Diameter 6 Flute Helex End Mill with 4" LOC National Twist Drill Co
1 1/8" Diameter End Mill - Hanita 1" Shank 6 Flute
YG JET-POWER CARBIDE 3 FL 35D HELIX STUB EM 1/2 X 1/2 X 5/8 X 2 1/2 LOT OF 3
People who viewed this item also vieved
Keyway Broach Bushing Guide, Type C, 3/4" x 7 3/4", Uncollared, Used
Keyway Broach Bushing Guide, Type D, 1 7/16" x 7", Uncollared, Used
¤SANDVIK D=25mm ROUGHING milling cutter+9pcs.SANDVIK R390-11T316M-PM 1025**NEW**
USED VALENITE FT SYSTEM 80mm EXTENSION ADAPTER FT50-50-080 USA
Kyocera Ceratip KCRP 3031L TC-40 Ceramic Insert .062" Wide
Korloy WNMG 432 - GM CN20 Ceramic Inserts
Brand New Panasonic Shield CUP TGN02004
Central-Machinery 1 in. Belt and 5 in. Disc Combination Sander
Type-C Custom Made Steel Bent Ring Jewelry Stamp by Saito, Tokyo, Japan.
Trumpf die 5 trumpf-no 0098723 N 700-0...-1, -2 Matrice 5 Matrize 5
Straight Shank Shell Reamer 1-7/8"
"BTRFLD" Counterbore 11/32" with Center Guide Pilot
Lot 1pcs HSS Hole Saw Dia 17mm High Speed Steel Hole Tool
Lot 1pcs HSS Hole Saw Dia 15mm High Speed Steel Hole Tool
Solid Carbide tapered Ball nose end mill R0.25*20.5D4*60 dirrect blade - 1 pcs
Solid Carbide tapered Ball nose end mill coating R0.5*30*D6*75 TiAlN HRC55
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies