Wera Impaktor Tri-torsion 1/4" Hex Ringmagnet Impact Driver Bit Holder, 073990

GBP 20.00

Kaunas, Lithuania
Feb 15th

Open on mobile:
QR code

WERA IMPAKTOR TRI-Torsion 1/4" Hex Ringmagnet Impact Driver Bit Holder, 073990 Wera IMPAKTOR Tri-Torsion Ringmagnet Impact Driver Screwdriver Bit Holder For 1/4" Hex Bits. Model: 073990. Quick-Look-Features: The All New Wera Impakator Bit Holder, 100% Guaranteed To Last! The Impaktor holder is designed to cushion extreme impulse peaks (impact action). Special torsion effect from the double, torsion spring, equipped with a ring magnet to easily hold longer and heavier screws, also ideal for above-head work. Particularly suitable for use with impact drivers and can be used in standard combi/drill drivers aswell. The magnet can be retracted and in this way be disabled. Designed and manufactured by Wera of Germany, so quality is assured Output: Suitable for bits with 1/4" hexagon head drive Design: The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry (two coupled torsion zones that perform successively), fitted with retaining ring and magnet. The Impaktor holder with ring magnet additionally holds longer and heavier screws absolutely securely. This enables a speedy and dependable positioning of the screw. It is also ideal for above-head work. Should the magnet function not be required in a particular situation e.g. when working with metal, it can be extracted from the screwdriving area and can thereby be “disabled”. Mainly used in manual power tool applications. Total Length of Bit Holder: 75mm Shaft Drive: 1/4" (6.3mm) Hex. Indepth Features: So-called impact drivers have established themselves in industry, the trade and among ambitioned do-it-yourselfers whenever professional screw connections are required. They can be used for many different applications and allow jobs to be accomplished more quickly and conveniently because the screw is tightened with continual rotary strokes in the direction of rotation. This means that screwdriving is simpler than when a permanent torque is applied. However, these appliances place great demands on the accessories required. Their high performance and the permanently-occurring peak torque loads exceed the physical limitations of many bits and bit holders. This results in above-average wear. Against this background, Wera has developed the new “Impaktor” System which, depending on the drive profile, has a lifetime that is as much as ten times longer when compared with standard or torsion bits. The basis for this was created in the manufacturing process with a best-possible utilisation of the material properties, through an individual hardening technology and with optimally-matched geometries for the screwdriving tools. In this way the “Impaktor” bits have been carefully designed for each drive profile and thereby precisely fit to the individual screwdriving job. Further, they are equipped with a torsion zone. The “TriTorsion” system is created when combined with the “Impaktor” bit holder, which has two additional torsion zones. Depending upon the strength of the peak loads that occur, either two or three of the differently-dimensioned zones react automatically, thereby allowing an optimal solution for the screwdriving job at hand Additionally, the special design of the holder means that the relief angle available to cushion the peak torque loads is double that of Wera’s “BiTorsion” holder. It means that this screwdriving tool system can absorb more kinetic energy and conduct it away from the tip of the bit, thus enabling longer bit lifetimes even under extreme screwdriving conditions. Normally, a high contact pressure is necessary when working with impact drivers so as to prevent the tool from slipping out of the screw recess. The diamond particles that are applied to the tip of the “Impaktor” bits greatly reduce the so-called “cam-out forces” that lead to a slipping out of the screw head. The diamond particles literally “bite” themselves firmly into the screw and in this way reduce the degree of contact pressure necessary. This consequently delays the onset of fatigue for the user when using power tools for screwdriving jobs over a longer period. The “Impaktor” holder, too, is precisely designed to meet the demands presented by powerful impact drivers. This is the reason why no over-susceptible materials have been used in its design in order to achieve a long lifetime for the holder. The holder is equipped with a ring magnet for manual power tool operations, a feature that holds even long and heavy screws most securely. Business seller information Laurynas Ramoska Contact details Laurynas Ramoska Dubravu g.26-1 45482 kaunas, LT Lithuania Phone:37060486179 Email:ramoska.andrius@gmail.com Return policy After receiving the item, contact seller within Return shipping 14 days Buyer pays return shipping

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Brand

Wera