US $108.60
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | WESTWARD |
| Weight | 13.9 | ||
| MPN | 19T327 | ||
| Length | 12.900 | ||
| Custom Bundle | No | ||
| Width | 8.200 | ||
| Bundle Description | No | ||
| Depth | 8.200 | ||
| Modified Item | No | ||
| For Use With | 3/8-16 Stud Size | ||
| Modification Description | N/A | ||
| Voltage | N/A | ||
| Number of Pieces | 54 | ||
| Country/Region of Manufacture | CN | ||
| Features | Clamping Kit, Machinist, Number of Pieces 52, Slot Size 5/16 in, | ||
| NumberOfItems | 1 | ||
| Power Source | N/A | ||
| Color | N/A | ||
| Number of Batteries | N/A | ||
| Restricted States | [] | ||
| Battery Size | N/A | ||
| Style | Clamping Kit | ||
| Battery Included | No | ||
| Item | Clamping Kit | ||
| Motor Type | N/A | ||
| Type | Clamping Kit | ||
| Battery Capacity | N/A | ||
| Application | For Workholding During Machining Appplications | ||
| Battery Life | N/A | ||
| Includes | (6) Step Blocks | ||
| Cable Length | N/A | ||
| UPC | 190735744918 |
Directions
Similar products from Other Workholding Tools
Chuck Jaw Assortment Single Lot
Revolving Centre MT3 Shank with 4 Jaw 65 mm Chuck Mounting for Lathe's Tailstock
LYNDEX-NIKKEN E32-511 Collet,ER32,13mmin
LYNDEX-NIKKEN E20-032 Collet,ER20,1/2in
LYNDEX-NIKKEN 300-096 Collet,3J,1-1/2in
LYNDEX-NIKKEN 100-006 Collet,100TG,3/32in
TE-CO 53506X Plunger,Spring W/Out Lock,1/2-13,3/4,PK5
Irwin 1964720 Clamp/Spreader (24")
ECLIPSE EMV3 Traditional Angle Vice Plates 4"
Te-Co 20415 Clamping Kit,11/16,5/8-11 Stud,52 Pcs
Collet Holder Cutter Equipment TIR0.005mm Toolholding Accessory BT40 CNC
Abbott Workholding Products Ktt10s Soft Top Jaw Set,Steel,12Mm,Pk3
De-Sta-Co 82L2g-203B800 Pneumatic Clamp,82L2g W/Sensor,660 In-Lb
Mitee-Bite Products Inc 31300 Fixture Clamp,Id Xpansn#5,5/8-11,1-3/4In
Clamps. 1-3/4-inch X 2-3/8-inch 4-pack 19686 Big Horn Miter
OSBORNE WOOD PRODUCTS, INC. 1429W 34 1/2 x 5 Roped Island Leg in Black Walnut
OSBORNE WOOD PRODUCTS, INC. 1509A 40 1/2 x 5 Wilmington Bar Top Island Leg in
OSBORNE WOOD PRODUCTS, INC. 2711P-CHR 35 1/2 x 3 1/2 Electra Fusion Leg in Pine
OSBORNE WOOD PRODUCTS, INC. 2706MH-GMG 35 1/2 x 3 1/2 Conway Fusion Leg in
People who viewed this item also vieved
7.25" x 4" x 4" Heavy Duty Right Angle Plate Block Machinist Setup
Brown and Sharpe 750 B V Block, with clamp. VGC.
USED MAHR .00005 PRECISION BENCH MICROMETER COMPARATOR
35 Mill Taper Interchangable Tip Dead Center Set Fits Cinturn Cin-Turn
35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646479
MicroCentric CB80-ND Collet Chuck, with S30 Collet and Installation Tool.
Vintage Almond Co Machinist Drill Chuck 40-62
PHASE II 3 Jaw Direct Mounting Series Chuck - CHUCK SIZE: 6"
DE-STA-CO Manual Straight Line Clamp 620 (56200)
Ultraweld thermoldweld Mold Handle Clamp set of two
Camlok CH4/L Heavy Duty Horizontal Plate Clamp NEW
CNC Milling Straight Shank Collet Chuck + Wrench Extension Tools C12 ER8M 150L
PF70-5C Collet Rotary Indexer Fixture SPIN INDEX NEW
USED NMTB-50 TAPER TG200 COLLET CHUCK NMTB50 x TG-200 x 4.00"Gage
6 x 16 Inch Precision Slide Table (Inv.32011)
LATHE FACEPLATE 11 INCH. 1 5/8" - 8 THREADS 1 1/8" thick
South Bend Atlas Clausing Face Plate T-Slot 8"
8.5" 216mm YUASA 550-815 VERTICAL HORIZONTAL PNEUMATIC AIR ROTARY TABLE INDEXER
A.G. Davis/AA Gage 12" Autodex with 180 deg Reciprocating Index Rotary Table
Haas 6" Rotary Table (no controller) - FE35
High Quality Vintage Machinist Vise. Jaws (2 1/2" x 1 1/2") Opens to 2 5/8"
IRWIN RECORD 3" JAW CLAMP ON VICE, 2-1/2" CAPACITY, 1-1/2" DEPTH
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies