+ Post new Ad
WHITNEY JENSEN # 5 JR METALWORKING PUNCH SET COMPLETE IN FITTED PLASTIC BOX, US $780 – Picture 0
WHITNEY JENSEN # 5 JR METALWORKING PUNCH SET COMPLETE IN FITTED PLASTIC BOX, US $780 – Picture 0

Whitney Jensen # 5 Jr Metalworking Punch Set Complete In Fitted Plastic Box

US $780

  • Maple Park, Illinois, United States
  • Jun 21st
Open on mobile:
QR code
Whitney Jensen Metal Working Tools & Machinery Punch No. 5 JR:Good Condition, fully operational! Plastic case is somewhat worn, shows age.  Included instruction sheet.

Directions

Similar products from Punch Tool Sets & Dies

Shield U Die Mold for Press Machine [TDP-1.5,10*8.2MM] Candy Maker Dieset

Shield U Die Mold for Press Machine [TDP-1.5,10*8.2MM] Candy Maker Dieset

  • Wenzhou,Zhejiang, China
  • Jun 22nd
Skull Press Flat Die Mold [8MM,TDP-5] for Candy Making Press Machine

Skull Press Flat Die Mold [8MM,TDP-5] for Candy Making Press Machine

  • Wenzhou,Zhejiang, China
  • Jun 22nd
U.S. MILITARY SURPLUS 3/4" DIAMETER X 7" LENGTH ROUND BRONZE PUNCH

U.S. MILITARY SURPLUS 3/4" DIAMETER X 7" LENGTH ROUND BRONZE PUNCH

  • San Antonio, Texas, United States
  • Jun 21st
New 2 5/8" - 8 UN RH Thread 4 1/2" Hex Die

New 2 5/8" - 8 UN RH Thread 4 1/2" Hex Die

  • Nashville, Illinois, United States
  • Jun 21st
New Widell 34030 Carbon Steel 3" - 8 UN RH Thread 5" Hex Die

New Widell 34030 Carbon Steel 3" - 8 UN RH Thread 5" Hex Die

  • Nashville, Illinois, United States
  • Jun 21st
New Widell 34022 Carbon Steel 2 1/2" - 8 UN RH Thread 4 1/2" Hex Die

New Widell 34022 Carbon Steel 2 1/2" - 8 UN RH Thread 4 1/2" Hex Die

  • Nashville, Illinois, United States
  • Jun 21st
LOT OF 6 NEW MOELLER 0117-RG87 PUNCHES RND 20 DIA X 25, P=9.58 B=12 P/S

LOT OF 6 NEW MOELLER 0117-RG87 PUNCHES RND 20 DIA X 25, P=9.58 B=12 P/S

  • Utica, Michigan, United States
  • Jun 21st
G.T.D. Greenfield #1852 1 inch Round Dies Stock Handle Wrench

G.T.D. Greenfield #1852 1 inch Round Dies Stock Handle Wrench

  • Edison, New Jersey, United States
  • Jun 21st
STARRETT MACHINIST DRIVE PIN PUNCH SET - NEW

STARRETT MACHINIST DRIVE PIN PUNCH SET - NEW

  • Pittsburgh, Pennsylvania, United States
  • Jun 21st
ROPER WHITNEY * NO.5 * JR HAND PUNCH KIT * 15 Pcs TOOL & 7 PUNCHES & 7 DIES NEW

ROPER WHITNEY * NO.5 * JR HAND PUNCH KIT * 15 Pcs TOOL & 7 PUNCHES & 7 DIES NEW

  • Baltimore, Maryland, United States
  • Jun 21st
(2) Tap 1/2-24 NS Made in USA NEW - ACE HANSON - 2 PCS

(2) Tap 1/2-24 NS Made in USA NEW - ACE HANSON - 2 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
(2) Tap 7/16-20 NF 25/64 Drill Made in USA NEW - ACE HANSON - 2 PCS

(2) Tap 7/16-20 NF 25/64 Drill Made in USA NEW - ACE HANSON - 2 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
(2) Tap 7/16-20 NF 25/64 Drill Made in USA NEW - ACE HANSON - 2 PCS (2)

(2) Tap 7/16-20 NF 25/64 Drill Made in USA NEW - ACE HANSON - 2 PCS (2)

  • Waldorf, Maryland, United States
  • Jun 21st
Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 1 PCS

Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 1 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
(2) Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 2 PCS

(2) Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 2 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
Lot of 4 Die Holders, Deburring Tool, Forged Die Holder (E)

Lot of 4 Die Holders, Deburring Tool, Forged Die Holder (E)

  • Vinton, Virginia, United States
  • Jun 21st
Lot of 13 Threading Dies - GTD, Butterfield and More (E)

Lot of 13 Threading Dies - GTD, Butterfield and More (E)

  • Vinton, Virginia, United States
  • Jun 21st
(3) Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 3 PCS

(3) Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 3 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
Tap 5/16 NF 9/32 Drill Made in USA NEW - ACE HANSON - 1 PCS

Tap 5/16 NF 9/32 Drill Made in USA NEW - ACE HANSON - 1 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
(2) Tap 5/16 NF 9/32 Drill Made in USA NEW - ACE HANSON - 2 PCS

(2) Tap 5/16 NF 9/32 Drill Made in USA NEW - ACE HANSON - 2 PCS

  • Waldorf, Maryland, United States
  • Jun 21st

People who viewed this item also vieved

HOUGEN ROTABROACH CUTTER 1 3/4" DIA. BY 3" DEEP x 1 1/4" SHANK

HOUGEN ROTABROACH CUTTER 1 3/4" DIA. BY 3" DEEP x 1 1/4" SHANK

  • Roseville, California, United States
  • Jan 30th
Large 3/4" Federal Broach #78696 36" in Length NOS New Old Stock

Large 3/4" Federal Broach #78696 36" in Length NOS New Old Stock

  • Landenberg, Pennsylvania, United States
  • Jan 30th
TP41 American National Carbide Insert 1 pc lot

TP41 American National Carbide Insert 1 pc lot

  • Hendersonville, Tennessee, United States
  • Jan 30th
TNMG331MST RTW Insert 1 pc lot

TNMG331MST RTW Insert 1 pc lot

  • Hendersonville, Tennessee, United States
  • Jan 30th
Iscar Ceramic SNG-543-T Inserts (.018 x 20, Iscanite)

Iscar Ceramic SNG-543-T Inserts (.018 x 20, Iscanite)

  • Webster, New York, United States
  • Jan 30th
(40pcs) SPGN-434 T1 WG-300 Greenleaf Ceramic Insert

(40pcs) SPGN-434 T1 WG-300 Greenleaf Ceramic Insert

  • Windsor, Connecticut, United States
  • Jan 30th
10 NEW 3 MM SHANK CARBIDE END MILLS. 4 FLUTE. BALL. USA MADE {E826}

10 NEW 3 MM SHANK CARBIDE END MILLS. 4 FLUTE. BALL. USA MADE {E826}

  • Mentor, Ohio, United States
  • Jan 30th
5 NEW 3/8" SHANK HSS END MILLS. 4 FL. .250" SLIGHTLY UNDER / OVER SIZED USA F64

5 NEW 3/8" SHANK HSS END MILLS. 4 FL. .250" SLIGHTLY UNDER / OVER SIZED USA F64

  • Mentor, Ohio, United States
  • Jan 30th
HOLE SAW SET, 12 PCS, 3/4" TO 5" DIAMTERS, TITANIUM COATED, MOSTLEY UNUSED.

HOLE SAW SET, 12 PCS, 3/4" TO 5" DIAMTERS, TITANIUM COATED, MOSTLEY UNUSED.

  • Overland Park, Kansas, United States
  • Jan 30th
USED INVOLUTE GEAR CUTTER #7 14P 14-16T 7/8"bore Brown & Sharpe

USED INVOLUTE GEAR CUTTER #7 14P 14-16T 7/8"bore Brown & Sharpe

  • Kelly, North Carolina, United States
  • Jan 30th
Vintage R&T Keystone 1" straight flute Expansion Reamer aprox 9" long

Vintage R&T Keystone 1" straight flute Expansion Reamer aprox 9" long

  • Tilton, New Hampshire, United States
  • Jan 30th
Vintage MORSE. , Straight Reamer 12 1/4" long, 1 3/16" across In metal tube

Vintage MORSE. , Straight Reamer 12 1/4" long, 1 3/16" across In metal tube

  • Tilton, New Hampshire, United States
  • Jan 30th
RS1224 Starrett hand hack saw blade redstripe 12" x 1/2" x .025" 24 TPI 40024

RS1224 Starrett hand hack saw blade redstripe 12" x 1/2" x .025" 24 TPI 40024

  • Chicago, Illinois, United States
  • Jan 30th
RS1032 Starrett hand hack saw blade redstripe 12" x 1/2" x .025" 32 TPI 40021

RS1032 Starrett hand hack saw blade redstripe 12" x 1/2" x .025" 32 TPI 40021

  • Chicago, Illinois, United States
  • Jan 30th
5 USED SOLID CARBIDE BORING BARS. 3/8" SHANK. MICRO 100 STYLE. B-320 (F227}

5 USED SOLID CARBIDE BORING BARS. 3/8" SHANK. MICRO 100 STYLE. B-320 (F227}

  • Mentor, Ohio, United States
  • Jan 30th
5 USED SOLID CARBIDE BORING BARS. 3/16" SHANK. MICRO 100 STYLE. B-140400 (F191}

5 USED SOLID CARBIDE BORING BARS. 3/16" SHANK. MICRO 100 STYLE. B-140400 (F191}

  • Mentor, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies