+ Post new Ad
WIDELL TAP SET 3PCS~NEW~SURPLUS~, US $85 – Picture 0
WIDELL TAP SET 3PCS~NEW~SURPLUS~, US $85 – Picture 0

Widell Tap Set 3pcs~new~surplus~

US $85

  • Orwell, Ohio, United States
  • Jun 13th
Open on mobile:
QR code
WIDELL TAP SET~NEW~SURPLUS~ (1)TAPER (1) PLUG (1) BOTTOM SIZE: 1-7/8-8 H6 6FL L/S TAP Total weight:11 Lbs. / Ref. # 065 E ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PAYMENTS ACCEPTED: ·Paypal Payment is expected within 7 days of the auction closing. Because of past history with winning bidder's non-payments, unless stated that payment will be late for an acceptable reason within a timely manner, we will be forced to leave negative feedback. Although we greatly appreciate buyers that figure out their own shipping, and pay immediately; unfortunately it generally causes problems. Please wait until we send you your invoice to pay. Thank You. SHIPPING & HANDLING: All items below 150 Lbs. will be shipped via " United Parcel Service" (UPS) Ground. Unless other provisions are necessary. We will ship world wide. R.P. Machine is responsible for the initial shipping cost only. All other duties and charges are the responsibility of the buyer. Shipping is calculated via the Ebay shipping calculator, using UPS Ground rate. All items have an additional handling charge which will range from between $2.00 and $20.00 depending on the fragility and special packing needs of your items. We need to know if we will be shipping to a business or residential address so that we may better calculate shipping cost. Items above 150 Lbs. will be shipped via freight carrier. Shipping and handling fees may vary by weight and special materials needs. IN THE EVENT OF A DAMAGED SHIPMENT: If an item should arrive to the winning bidders address broken, an insurance or return claim may be made if the following provisions are met: Pictures taken of the damaged item's box as well as the item itself. So that we know what condition the item was in before its return to our facility. Once you have taken the pictures, please e-mail us at rspalesh@fairpoint.net and report the damage as soon as possible. Steps will then be taken to quickly and efficiently resolve the issue. Note: If you have any questions, please e-mail or call Robert @ (440) 813-0920. Thanks!

Directions

Similar products from Pats & Dies Sets

NEW 1-3/8" - 6 NC REIFF & NESTOR BOTTOMING TAP HS GH 4 MACHINE SHOP TOOL

NEW 1-3/8" - 6 NC REIFF & NESTOR BOTTOMING TAP HS GH 4 MACHINE SHOP TOOL

  • Xenia, Ohio, United States
  • Jun 13th
NEW 1-3/8" - 6 NC REIFF & NESTOR PLUG TAP HS GH 4 MACHINIST SHOP TOOL

NEW 1-3/8" - 6 NC REIFF & NESTOR PLUG TAP HS GH 4 MACHINIST SHOP TOOL

  • Xenia, Ohio, United States
  • Jun 13th
NEW 1-3/8" - 6 NC REIFF & NESTOR TAPER TAP HS GH 4 MACHINE SHOP TOOL METAL WORK

NEW 1-3/8" - 6 NC REIFF & NESTOR TAPER TAP HS GH 4 MACHINE SHOP TOOL METAL WORK

  • Xenia, Ohio, United States
  • Jun 13th
1 1/4 - 7 HANSON AND WHITNEY CO. TAP 37018 NC HS GH 4 MACHINE SHOP TOOL

1 1/4 - 7 HANSON AND WHITNEY CO. TAP 37018 NC HS GH 4 MACHINE SHOP TOOL

  • Xenia, Ohio, United States
  • Jun 13th
1 1/4 - 7 TAPER TAP NC HS GH4 4 FLUTE STRAIGHT MACHINE

1 1/4 - 7 TAPER TAP NC HS GH4 4 FLUTE STRAIGHT MACHINE

  • Xenia, Ohio, United States
  • Jun 13th
1/4 - 18 REGAL PIPE TAP NPTF HSG PROJ 142 INT. THD 916D

1/4 - 18 REGAL PIPE TAP NPTF HSG PROJ 142 INT. THD 916D

  • Xenia, Ohio, United States
  • Jun 13th
3/4 16 NF HS GH3 TAP 4 FLUTE MACHINIST TOOLS TAPS USA

3/4 16 NF HS GH3 TAP 4 FLUTE MACHINIST TOOLS TAPS USA

  • Xenia, Ohio, United States
  • Jun 13th
9/16 HS DRILL USA MADE MACHINIST TOOLS TOOLMAKER MACHINE SHOP .5625

9/16 HS DRILL USA MADE MACHINIST TOOLS TOOLMAKER MACHINE SHOP .5625

  • Xenia, Ohio, United States
  • Jun 13th
6PCS 1/4 28 NF H3 BOTTOMING TAPS 4 FLUTE USA MADE TOOLS

6PCS 1/4 28 NF H3 BOTTOMING TAPS 4 FLUTE USA MADE TOOLS

  • Xenia, Ohio, United States
  • Jun 13th
1/8 27 NPTF HSC PIPE TAP MACHINE SHOP MACHINIST TOOLS

1/8 27 NPTF HSC PIPE TAP MACHINE SHOP MACHINIST TOOLS

  • Xenia, Ohio, United States
  • Jun 13th
#0-1/4 INCH JT33 SELF REVERSING TAPPING HEAD WITH 2&3 MT SHANKS & 2 COLLETS

#0-1/4 INCH JT33 SELF REVERSING TAPPING HEAD WITH 2&3 MT SHANKS & 2 COLLETS

  • Columbus, Ohio, United States
  • Jun 13th
GREENFIELD 14547 5303 TAP SET 1-8 FOR HAND DIE

GREENFIELD 14547 5303 TAP SET 1-8 FOR HAND DIE

  • Andrew, Iowa, United States
  • Jun 13th
GREENFIELD 14474 5303 TAP SET FOR HAND DIE

GREENFIELD 14474 5303 TAP SET FOR HAND DIE

  • Andrew, Iowa, United States
  • Jun 13th
12 PCS 7/16 20 NF +.005 OVERSIZE BOTTOMING TAPS 4 FLUTE

12 PCS 7/16 20 NF +.005 OVERSIZE BOTTOMING TAPS 4 FLUTE

  • Xenia, Ohio, United States
  • Jun 13th
3 PC 1" 12 NF HSG +.005 OVERSIZE BOTTOMING TAPS 4 FLUTE

3 PC 1" 12 NF HSG +.005 OVERSIZE BOTTOMING TAPS 4 FLUTE

  • Xenia, Ohio, United States
  • Jun 13th
12 PCS M11 X 1.5 HSG 3 FLUTE FS TAPS GREENFIELD USA MACHINE SHOP TOOLING TOOLS

12 PCS M11 X 1.5 HSG 3 FLUTE FS TAPS GREENFIELD USA MACHINE SHOP TOOLING TOOLS

  • Xenia, Ohio, United States
  • Jun 13th
NEW Dovetail Cutters Set 5 pc Set High Speed Steel

NEW Dovetail Cutters Set 5 pc Set High Speed Steel

  • Columbus, Ohio, United States
  • Jun 13th
6mm ID Easy-Retrieve Steel Pellet Press Tablet Mill Dry Pressing Die Set Mold

6mm ID Easy-Retrieve Steel Pellet Press Tablet Mill Dry Pressing Die Set Mold

  • Livingston, New Jersey, United States
  • Jun 13th
6mm ID Harden Steel Vacuum Pellet Tablet Press Mill Dry Pressing Die Mold

6mm ID Harden Steel Vacuum Pellet Tablet Press Mill Dry Pressing Die Mold

  • Livingston, New Jersey, United States
  • Jun 13th
CMT 45 PIECE METRIC TITANIUM TAPS & DIES TUNGSTEN SET 40055

CMT 45 PIECE METRIC TITANIUM TAPS & DIES TUNGSTEN SET 40055

  • Tacoma, Washington, United States
  • Jun 13th

People who viewed this item also vieved

Vintage BTD Tap wrench

Vintage BTD Tap wrench

  • Monroe, Michigan, United States
  • Jan 30th
CREST 1"-8NC HS GH-4 TAP

CREST 1"-8NC HS GH-4 TAP

  • Wadley, Alabama, United States
  • Jan 30th
3pc Allegiance 1-8 GH4 4 FLT BTM HS4 Hand Tap 3748141 New USA

3pc Allegiance 1-8 GH4 4 FLT BTM HS4 Hand Tap 3748141 New USA

  • Murfreesboro, Tennessee, United States
  • Jan 30th
3pc Allegiance 5/8-11 GH3 Taper HS4 FLT Hand Tap 3746533 New US 2 Sets Available

3pc Allegiance 5/8-11 GH3 Taper HS4 FLT Hand Tap 3746533 New US 2 Sets Available

  • Murfreesboro, Tennessee, United States
  • Jan 30th
3pc Allegiance 5/8-11 GH3 Bottom HS 4 FLT Hand Tap 3746531 New USA

3pc Allegiance 5/8-11 GH3 Bottom HS 4 FLT Hand Tap 3746531 New USA

  • Murfreesboro, Tennessee, United States
  • Jan 30th
Threading Tap 1-1/4"-7 U.S.A.

Threading Tap 1-1/4"-7 U.S.A.

  • Coventry, Rhode Island, United States
  • Jan 30th
Threading Tap 1-1/4"-7NC

Threading Tap 1-1/4"-7NC

  • Coventry, Rhode Island, United States
  • Jan 30th
BALAX 3/8-18 NPTF PIPE THREADFLOER THREAD FORMER TAP

BALAX 3/8-18 NPTF PIPE THREADFLOER THREAD FORMER TAP

  • Niles, Illinois, United States
  • Jan 30th
Lot of 10 taps #2/56 3 flute used probably

Lot of 10 taps #2/56 3 flute used probably

  • Jackson, Michigan, United States
  • Jan 30th
5/8-18 H5 4Flute Spiral Flute Bottom HSS-EX TiCn ANSI CNC Combo-Tap YG-1 #T2665C

5/8-18 H5 4Flute Spiral Flute Bottom HSS-EX TiCn ANSI CNC Combo-Tap YG-1 #T2665C

  • Seminole, Florida, United States
  • Jan 30th
1-1/4x4 Threaded Tube 440570

1-1/4x4 Threaded Tube 440570

  • Hibbing, Minnesota, United States
  • Jan 30th
7 PCS IRWIN HANSON Pipe Tap Size 1/2"-14 NPT Industrial Tool Tapered 1905ZR

7 PCS IRWIN HANSON Pipe Tap Size 1/2"-14 NPT Industrial Tool Tapered 1905ZR

  • Sun Valley, California, United States
  • Jan 30th
Extension Pipe Tap, 3/8"-18 x 6", HSS, NPT

Extension Pipe Tap, 3/8"-18 x 6", HSS, NPT

  • Chillicothe, Missouri, United States
  • Jan 30th
HSNPT1-1/2, 1 1/2" - 11 1/2, HSS NPT Pipe Tap

HSNPT1-1/2, 1 1/2" - 11 1/2, HSS NPT Pipe Tap

  • Chillicothe, Missouri, United States
  • Jan 30th
Vermont American 2" - 11-1/2 NPT Tap (#5), 7 Flutes, 1-1/2" Dr., Used

Vermont American 2" - 11-1/2 NPT Tap (#5), 7 Flutes, 1-1/2" Dr., Used

  • Spokane, Washington, United States
  • Jan 30th
1/2-13 Titan USA 4 Flute Bright Finish Plug Tap (K157)

1/2-13 Titan USA 4 Flute Bright Finish Plug Tap (K157)

  • Dallas, Texas, United States
  • Jan 30th
1/4-28 Titan USA 4 Flute Steam Oxide Finish Spiral Point Plug Tap (K159)

1/4-28 Titan USA 4 Flute Steam Oxide Finish Spiral Point Plug Tap (K159)

  • Dallas, Texas, United States
  • Jan 30th
M3 x .5 D3 3Flute Spiral Point Plug HSS-EX TiCN Coated ANSI DIN Length Combo-Tap

M3 x .5 D3 3Flute Spiral Point Plug HSS-EX TiCN Coated ANSI DIN Length Combo-Tap

  • Vernon Hills, Illinois, United States
  • Jan 30th
TRAVERS TOOL CO SPIRAL POINT TAP 6-32 Box of 12 taps

TRAVERS TOOL CO SPIRAL POINT TAP 6-32 Box of 12 taps

  • Ridge Spring, South Carolina, United States
  • Jan 30th
5/16" Thread:24 HSS Spiral Point Tap Part No: 0326671 New

5/16" Thread:24 HSS Spiral Point Tap Part No: 0326671 New

  • Sparta, Michigan, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies