+ Post new Ad
Widia / Hanita 3640372 1" x 1" X 1 1/2" X 4", R.03 Solid Carbide End Mill, US $130 – Picture 0
Widia / Hanita 3640372 1" x 1" X 1 1/2" X 4", R.03 Solid Carbide End Mill, US $130 – Picture 0

Widia / Hanita 3640372 1" X 1" X 1 1/2" X 4", R.03 Solid Carbide End Mill

US $130

  • Houma, Louisiana, United States
  • Jun 17th
Open on mobile:
QR code
TM4V0525008B 1x1x1-1/2x4 AlTiN R=0.762 Square End 4FL Center Cutting HP Carbide Endmill Coating:AlTiNCorner Radius:0.762mmCut Diameter (decimal):1.0000Cut Diameter (in):1"Cut Diameter (mm):25.400Cut Type:CenterHelix Angle:38°Length of Cut (decimal):1.5000Length of Cut (in):1-1/2"Length of Cut (mm):38.100Material:CarbideNumber of Flutes:4Overall Length (decimal):4.0000Overall Length (in):4"Overall Length (mm):101.600Series:4V05Shank Diameter (decimal):1.0000Shank Diameter (in):1"Shank Diameter (mm):25.400Shank Style:Weldon FlatSystem of Measurement:InchType:Finishing & Roughing Corner Radius End MillProduct Weight:0.681 lbs.Applications:Use in steel <40 Rc, stainless steel, cast iron, ductile iron, and high temp alloysNotes:Unequal flute spacing for chatter free machining resulting in a better surface finish Provides smooth, silent machining, maximizes productivity Effective in extreme conditions and at high surface speeds Available in various corner styles for increased corner protection TiAlN and AlTiN coated for higher speeds and extended tool life peeds Available in various corner styles for increased corner protection TiAlN and AlTiN coated for higher speeds and extended tool life

Directions

Similar products from End Mills Router & Drill Bits

8 NEW 3 MM SHANK CARBIDE END MILLS. 3 FLUTE. USA MADE {J58}

8 NEW 3 MM SHANK CARBIDE END MILLS. 3 FLUTE. USA MADE {J58}

  • Mentor, Ohio, United States
  • Jun 17th
(Machinist Lot of 5) 5/16&#034; Kennametal Carbide TiN 4 Flute End Mill *NR* (B 270)

(Machinist Lot of 5) 5/16" Kennametal Carbide TiN 4 Flute End Mill *NR* (B 270)

  • Dallas, Texas, United States
  • Jun 17th
(Machinist Lot of 5) 1/2&#034; Garr Carbide TiALN 4 Flute End Mill *NR* B 275

(Machinist Lot of 5) 1/2" Garr Carbide TiALN 4 Flute End Mill *NR* B 275

  • Dallas, Texas, United States
  • Jun 17th
NOS QUALCUT UK 1&#034; x 60 Degree INVERTED DOVETAIL CUTTER 12mm Shank WRNA.2.5

NOS QUALCUT UK 1" x 60 Degree INVERTED DOVETAIL CUTTER 12mm Shank WRNA.2.5

  • Perth, Ontario, Canada
  • Jun 17th
NOS QUALCUT UK 1/2&#034; x 45 Deg DOVETAIL CUTTER 12mm Screwed Shank End Mill WRNA2.7

NOS QUALCUT UK 1/2" x 45 Deg DOVETAIL CUTTER 12mm Screwed Shank End Mill WRNA2.7

  • Perth, Ontario, Canada
  • Jun 17th
(Machinist Lot of 7) Assorted 5/16&#034; Garr Carbide TiALN 4FL End Mill *NR* B 276

(Machinist Lot of 7) Assorted 5/16" Garr Carbide TiALN 4FL End Mill *NR* B 276

  • Dallas, Texas, United States
  • Jun 17th
1-11/16&#034; DRILL BIT Taper Shank 14&#034; LONG

1-11/16" DRILL BIT Taper Shank 14" LONG

  • Highland Park, Michigan, United States
  • Jun 17th
Import 5/8 2 flute H/S double end mills-4-/12 OAL, 1-1/2LOC per side

Import 5/8 2 flute H/S double end mills-4-/12 OAL, 1-1/2LOC per side

  • Hampstead, Maryland, United States
  • Jun 17th
Solid Carbide End Mill 630 RA 1 x 6 x 3 Carbide .250C/R Garr Tool

Solid Carbide End Mill 630 RA 1 x 6 x 3 Carbide .250C/R Garr Tool

  • Hampstead, Maryland, United States
  • Jun 17th
SNMG 1906 12RP/SNMG643RP Roughing Positive Insert KCP25 Kennametal

SNMG 1906 12RP/SNMG643RP Roughing Positive Insert KCP25 Kennametal

  • Hampstead, Maryland, United States
  • Jun 17th
End Mills 0.007

End Mills 0.007

  • New Brighton, Pennsylvania, United States
  • Jun 17th
END MILLS 0.015

END MILLS 0.015

  • New Brighton, Pennsylvania, United States
  • Jun 17th
Widia / Hanita 3552573 1&#034; x 1&#034; X 1 3/4&#034; X 4 1/2&#034;, R.03 Carbide End Mill 5 flute

Widia / Hanita 3552573 1" x 1" X 1 3/4" X 4 1/2", R.03 Carbide End Mill 5 flute

  • Houma, Louisiana, United States
  • Jun 17th
Widia / Hanita ball nose 2837707 3/4&#034; x 3/4&#034; X 1 1/2&#034; X 4&#034;, Carbide

Widia / Hanita ball nose 2837707 3/4" x 3/4" X 1 1/2" X 4", Carbide

  • Houma, Louisiana, United States
  • Jun 17th
Micro 100 .250 x .500&#034; Depth Carbide Grooving Boring Bar Tool (Q 586)

Micro 100 .250 x .500" Depth Carbide Grooving Boring Bar Tool (Q 586)

  • Dallas, Texas, United States
  • Jun 17th
END MILL HIGH SPEED (.1875&#034;) 3/16&#034; DIAM 2FLUTE DOUBLE END STUB HANITA NEW $3.50

END MILL HIGH SPEED (.1875") 3/16" DIAM 2FLUTE DOUBLE END STUB HANITA NEW $3.50

  • North Tonawanda, New York, United States
  • Jun 17th
Champion Cutting Tool Corp Champion Cutting Tool XLVC-1/4 High Performance Tiain

Champion Cutting Tool Corp Champion Cutting Tool XLVC-1/4 High Performance Tiain

  • USA, United States
  • Jun 17th
(Lot of 5) 1/2&#034; Hanita Varimill Carbide TialN 4 Flute .020 CR End Mill (B 274)

(Lot of 5) 1/2" Hanita Varimill Carbide TialN 4 Flute .020 CR End Mill (B 274)

  • Dallas, Texas, United States
  • Jun 17th
(Machinist Lot of 5) 1/2&#034; Kennametal Carbide TiN 4 Flute End Mill *NR* (B 273)

(Machinist Lot of 5) 1/2" Kennametal Carbide TiN 4 Flute End Mill *NR* (B 273)

  • Dallas, Texas, United States
  • Jun 17th
RSF-187-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

RSF-187-2 TWO SPLIT END RADIUS TOOL, FULL RADIUS RELIEVED FOR RH CUT MICRO 100

  • Glendale, Arizona, United States
  • Jun 17th

People who viewed this item also vieved

3/8C import broach new (929-183A)

3/8C import broach new (929-183A)

  • Oxford, Pennsylvania, United States
  • Jan 30th
HOUGEN ROTABROACH CUTTER 2 7/8&#034; DIA. BY 3&#034; DEEP x 1 1/4&#034; SHANK

HOUGEN ROTABROACH CUTTER 2 7/8" DIA. BY 3" DEEP x 1 1/4" SHANK

  • Roseville, California, United States
  • Jan 30th
TNMM-544-71 Carbide Inserts 1C35 grade 6pcs

TNMM-544-71 Carbide Inserts 1C35 grade 6pcs

  • Hendersonville, Tennessee, United States
  • Jan 30th
BDE323R001 Grade IN1530 Ingersol Carbide Inserts 1 pc lot

BDE323R001 Grade IN1530 Ingersol Carbide Inserts 1 pc lot

  • Hendersonville, Tennessee, United States
  • Jan 30th
10 New SANDVIK RNG 45T0320, RNGN 120700T01020 Grade 670 Whisker Ceramic Inserts!

10 New SANDVIK RNG 45T0320, RNGN 120700T01020 Grade 670 Whisker Ceramic Inserts!

  • VADODARA, GUJARAT, India
  • Jan 30th
10 TaeguTec RNG 45 T6, RNGN 120700 Grade AS20 Ceramic Inserts for Nickel-based &amp;

10 TaeguTec RNG 45 T6, RNGN 120700 Grade AS20 Ceramic Inserts for Nickel-based &

  • VADODARA, GUJARAT, India
  • Jan 30th
CARBIDE BURR PORTING TOOL SF-5 DOUBLE CUT 4&#034; LOS NEW PREMIUM TOOL!

CARBIDE BURR PORTING TOOL SF-5 DOUBLE CUT 4" LOS NEW PREMIUM TOOL!

  • Bayville, New York, United States
  • Jan 30th
PORTING TOOL! CARBIDE BURR SC-5, 3&#034; LOS, Double CUT! 3/8&#034; SHANK DIAM, BRAND NEW

PORTING TOOL! CARBIDE BURR SC-5, 3" LOS, Double CUT! 3/8" SHANK DIAM, BRAND NEW

  • Bayville, New York, United States
  • Jan 30th
Roper Whitney No. 5 JR Hand Punch With Case

Roper Whitney No. 5 JR Hand Punch With Case

  • West Babylon, New York, United States
  • Jan 30th
Best Company Steel Stamping Set 1/8&#034; Number Set 0 - 9 VGC

Best Company Steel Stamping Set 1/8" Number Set 0 - 9 VGC

  • Lisbon, Ohio, United States
  • Jan 30th
1 1/4 UNION TWIST DRILL / BUTTERFIELD FLUTED CHUCKING REAMER NEW!

1 1/4 UNION TWIST DRILL / BUTTERFIELD FLUTED CHUCKING REAMER NEW!

  • Hastings, New York, United States
  • Jan 30th
11 Piece Adjustable Hand Reamer Set for Precision Hole Making

11 Piece Adjustable Hand Reamer Set for Precision Hole Making

  • Port Hueneme, California, United States
  • Jan 30th
Lenox 01135 Bandsaw DieMaster 2 Coil 250 FT 1/2 .035 6 tooth

Lenox 01135 Bandsaw DieMaster 2 Coil 250 FT 1/2 .035 6 tooth

  • Waukesha, Wisconsin, United States
  • Jan 30th
Dado set f s tools 53dl08

Dado set f s tools 53dl08

  • Thaxton, Virginia, United States
  • Jan 30th
6 USED SOLID CARBIDE BORING BARS. 1/8&#034; SHANK. MICRO 100 STYLE. B-100200 (F210}

6 USED SOLID CARBIDE BORING BARS. 1/8" SHANK. MICRO 100 STYLE. B-100200 (F210}

  • Mentor, Ohio, United States
  • Jan 30th
6 USED SOLID CARBIDE BORING BARS. 3/16&#034; SHANK. MICRO 100 STYLE. B-120500 (F182}

6 USED SOLID CARBIDE BORING BARS. 3/16" SHANK. MICRO 100 STYLE. B-120500 (F182}

  • Mentor, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies