+ Post new Ad
Wilton 2" baby bullet with Wilton PowRArm positioner, US $180 – Picture 0
Wilton 2" baby bullet with Wilton PowRArm positioner, US $180 – Picture 0

Wilton 2" Baby Bullet With Wilton Powrarm Positioner

US $180

  • Grants Pass, Oregon, United States
  • May 29th
Open on mobile:
QR code
Up for auction is a great Wilton baby bullet vise. This vise also has the optional powrarm junior swivel. The date on this vise is 1963 and it was manufactured in Chicago.  #820 is on the vise. The vise has most of its original paint and opens and closes smoothly.  The jaws close tightly and are smooth. The vise was lightly cleaned. It appears the two bolts that attach it to the powrarm are new. There are no prior owner marks. The jaws are two inches across. The powrarm rotates very smoothly.  This is one of the nicer ones. Please ask any questions before bidding. I accept returns within 14 days buyer to pay return shipping. Please contact me if you have any questions about your purchase. PayPal is the only method of payment accepted. I would like payment within 48 hours of the end of the auction. I will ship via USPS within 48 hours of receiving payment. I will ship internationally thru global shipping if available. Shipping and handling is $10.00 expedited shipping. Thanks for looking. I want to earn your positive feedback. If you have any concern about your purchase please contact me prior to leaving feedback so I can resolve the issue. Thank You

Directions

Similar products from Grips & Tongs

WILTON VISE JAWS USED W/PINS 400S 4 " WIDE

WILTON VISE JAWS USED W/PINS 400S 4 " WIDE

  • Arlington Heights, Illinois, United States
  • May 29th
WILTON VISE USED JAWS FOR A 400S WITHOUT PINS 4 " WIDE, CLEAN!

WILTON VISE USED JAWS FOR A 400S WITHOUT PINS 4 " WIDE, CLEAN!

  • Arlington Heights, Illinois, United States
  • May 29th
WILTON VISE USED 5" JAWS FOR OLDER 9500'S SCHILLER PK, C2'S

WILTON VISE USED 5" JAWS FOR OLDER 9500'S SCHILLER PK, C2'S

  • Arlington Heights, Illinois, United States
  • May 29th
Vintage Wilton 3.5" Jaw By 3" Opening Combination Pipe Bench Vise Anvil #121101

Vintage Wilton 3.5" Jaw By 3" Opening Combination Pipe Bench Vise Anvil #121101

  • Puyallup, Washington, United States
  • May 29th
WILTON VISE USED JAWS FOR OLDER 9400'S, / 101028'S, 4 " WIDE, CLEAN!

WILTON VISE USED JAWS FOR OLDER 9400'S, / 101028'S, 4 " WIDE, CLEAN!

  • Arlington Heights, Illinois, United States
  • May 29th
Starrett No. S166 Pin Vises Set Machinist Tools

Starrett No. S166 Pin Vises Set Machinist Tools

  • Havertown, Pennsylvania, United States
  • May 29th
Cumming Tool & Die Kit Vise K.C MO

Cumming Tool & Die Kit Vise K.C MO

  • South Coffeyville, Oklahoma, United States
  • May 29th
Massive vintage #74 Armstrong pipe vise

Massive vintage #74 Armstrong pipe vise

  • Wheatfield, Indiana, United States
  • May 29th
DRILL PRESS VISE 2-1/4 Inch Jaw Opening Capacity

DRILL PRESS VISE 2-1/4 Inch Jaw Opening Capacity

  • Spring Valley, New York, United States
  • May 29th
VINTAGE CRAFTSMAN TILTING DRILL PRESS VISE, 2-1/2", NO RESERVE!

VINTAGE CRAFTSMAN TILTING DRILL PRESS VISE, 2-1/2", NO RESERVE!

  • Belmont, Massachusetts, United States
  • May 29th
ROCK ISLAND NO. 594 BENCH VISE 4-1/2 X 1-1/2" JAW WIDTH X HEIGHT

ROCK ISLAND NO. 594 BENCH VISE 4-1/2 X 1-1/2" JAW WIDTH X HEIGHT

  • Torrance, California, United States
  • May 29th
PALMGREN #X1 MACHINIST 1 1/2" JAW VISE WITH SWIVEL BASE IN BOXES

PALMGREN #X1 MACHINIST 1 1/2" JAW VISE WITH SWIVEL BASE IN BOXES

  • Hatboro, Pennsylvania, United States
  • May 29th
VINTAGE COLUMBIAN SWIVEL BASE VISE G43 w/ ANVIL

VINTAGE COLUMBIAN SWIVEL BASE VISE G43 w/ ANVIL

  • Miami, Florida, United States
  • May 29th
VINTAGE CRAFTSMAN MACHINIST DRILL PRESS ANGLE VISE 2 3/8" JAWS TILT 0-90 DEGREES

VINTAGE CRAFTSMAN MACHINIST DRILL PRESS ANGLE VISE 2 3/8" JAWS TILT 0-90 DEGREES

  • Elmhurst, Illinois, United States
  • May 29th
7-1/2" jaw circuit board , Steady (7lb) vise

7-1/2" jaw circuit board , Steady (7lb) vise

  • Pleasanton, California, United States
  • May 29th
Vintage Keystone PA No Pipe Yoke Clamp Vise up to 3 inch USA

Vintage Keystone PA No Pipe Yoke Clamp Vise up to 3 inch USA

  • Williamsport, Pennsylvania, United States
  • May 29th
Dayton 4YG28 Vise, Cross

Dayton 4YG28 Vise, Cross

  • USA, United States
  • May 28th
Nice STANLEY 3" Wide Jaw VISE MACHINIST MILLING DRILL PRESS LATHE TOOL with die

Nice STANLEY 3" Wide Jaw VISE MACHINIST MILLING DRILL PRESS LATHE TOOL with die

  • Palo, Iowa, United States
  • May 28th
4" Swivel 360 Deg Drill Press Vise Bench X Y Clamp Cross Slide Milling HD 4 inch

4" Swivel 360 Deg Drill Press Vise Bench X Y Clamp Cross Slide Milling HD 4 inch

  • Walnut, California, United States
  • May 28th
Sears Bench Vise, 3", 2.5" Opening, Pipe Grips, Small Anvil

Sears Bench Vise, 3", 2.5" Opening, Pipe Grips, Small Anvil

  • East Peoria, Illinois, United States
  • May 28th

People who viewed this item also vieved

No. 3 Morse Taper Carbide Bullnose Dead Center 1 7/8 (Inv. 25208)

No. 3 Morse Taper Carbide Bullnose Dead Center 1 7/8 (Inv. 25208)

  • Portland, Connecticut, United States
  • Jan 30th
USED RITEN #14 JARNO LIVE CENTER WITH X-LONG POINT (POINT DIAMETER 1.380")

USED RITEN #14 JARNO LIVE CENTER WITH X-LONG POINT (POINT DIAMETER 1.380")

  • Fairfield, Iowa, United States
  • Jan 30th
ROHM TYPE-614 SIZE-110 LIVE TAILSTOCK CENTER FOR INTERCHANGEABLE INSERTS #5MT

ROHM TYPE-614 SIZE-110 LIVE TAILSTOCK CENTER FOR INTERCHANGEABLE INSERTS #5MT

  • Fairfield, Iowa, United States
  • Jan 30th
ALBRECHT MILLING CHUCK APC20 WITH 1/2" COLLET

ALBRECHT MILLING CHUCK APC20 WITH 1/2" COLLET

  • Meridian, Idaho, United States
  • Jan 30th
SET OF 3 USED HURON STEEL SOFT JAWS (6JSHP) 1.5mm X 60 SERRATIONS

SET OF 3 USED HURON STEEL SOFT JAWS (6JSHP) 1.5mm X 60 SERRATIONS

  • Fairfield, Iowa, United States
  • Jan 30th
4 JAW 150mm MYFORD 34M LIGHT DUTY INDEPENDENT CHUCK, BRAND NEW IN BOX

4 JAW 150mm MYFORD 34M LIGHT DUTY INDEPENDENT CHUCK, BRAND NEW IN BOX

  • Havertown, Pennsylvania, United States
  • Jan 30th
Red Handle Horizontal Type Quick Holding Toggle Clamp 27Kg 60 Lbs 201

Red Handle Horizontal Type Quick Holding Toggle Clamp 27Kg 60 Lbs 201

  • Hong Kong, Hong Kong
  • Jan 30th
IRWIN Vise Grip 9R The OriginaL Locking Welding Clamp 25ZR

IRWIN Vise Grip 9R The OriginaL Locking Welding Clamp 25ZR

  • petach tikva, default, Israel
  • Jan 30th
(2) Armstrong No. 118 C-Clamp Short Spindle 12" to 18 " Opening USED

(2) Armstrong No. 118 C-Clamp Short Spindle 12" to 18 " Opening USED

  • Cornell, Illinois, United States
  • Jan 30th
5C Step Collet 4" Head Diameter 1 1/8" Head Length Can Be Machined NEW

5C Step Collet 4" Head Diameter 1 1/8" Head Length Can Be Machined NEW

  • Pottstown, Pennsylvania, United States
  • Jan 30th
HARDINGE 5C NO ID THREADS COLLET 1/4 (REF #19)

HARDINGE 5C NO ID THREADS COLLET 1/4 (REF #19)

  • Norwood, Massachusetts, United States
  • Jan 30th
HARDINGE 5C INTERNAL THREADS COLLET 9/32

HARDINGE 5C INTERNAL THREADS COLLET 9/32

  • Norwood, Massachusetts, United States
  • Jan 30th
BRAND NEW 5C COLLET CHUCK

BRAND NEW 5C COLLET CHUCK

  • Garden Grove, California, United States
  • Jan 30th
BRAND NEW 5C H/V ANGLE COLLET FIXTURE

BRAND NEW 5C H/V ANGLE COLLET FIXTURE

  • Garden Grove, California, United States
  • Jan 30th
BRAND NEW 5C H/V COLLET FIXTURE

BRAND NEW 5C H/V COLLET FIXTURE

  • Garden Grove, California, United States
  • Jan 30th
FAIRCHILD VARI-CHAIN 12-84 VARIABLE SPEED TRANSMISSION

FAIRCHILD VARI-CHAIN 12-84 VARIABLE SPEED TRANSMISSION

  • Tucson, Arizona, United States
  • Jan 30th
Lot of 3 3.5" Vise Spacer Non-Factory

Lot of 3 3.5" Vise Spacer Non-Factory

  • Albertville, Minnesota, United States
  • Jan 30th
Starrett Jack Screw Set - S190

Starrett Jack Screw Set - S190

  • Avon, Indiana, United States
  • Jan 30th
SIP 23 inch rotary table

SIP 23 inch rotary table

  • Lewisville, Pennsylvania, United States
  • Feb 24th
*NEW* HAAS HRT-210 ROTARY TABLE BRUSH TYPE HRT210 INDEXER 4TH AXIS LMSI *video*

*NEW* HAAS HRT-210 ROTARY TABLE BRUSH TYPE HRT210 INDEXER 4TH AXIS LMSI *video*

  • Sun Valley, California, United States
  • Feb 24th
BS-0 Precision Dividing Head With Tailstock, part#: BS-0,-new

BS-0 Precision Dividing Head With Tailstock, part#: BS-0,-new

  • Madison Heights, Michigan, United States
  • Feb 24th
MACHINIST LATHE MILL Machinist Lot Starrett Gages Cutters Hold Downs Parts Etc

MACHINIST LATHE MILL Machinist Lot Starrett Gages Cutters Hold Downs Parts Etc

  • Morris Plains, New Jersey, United States
  • Feb 25th
MACHINIST LATHE MILL Machinist Lot of Brass Chuck Tool Holders Cutter Parts Etc

MACHINIST LATHE MILL Machinist Lot of Brass Chuck Tool Holders Cutter Parts Etc

  • Morris Plains, New Jersey, United States
  • Feb 25th
MACHINIST LATHE MILL 2 Machinist Adjustable Milling Table Hold Down Clamps

MACHINIST LATHE MILL 2 Machinist Adjustable Milling Table Hold Down Clamps

  • Morris Plains, New Jersey, United States
  • Feb 25th
Used BT30 ER32 COLLET CHUCK ER32x60 (F) (WR.8.B.B.7)

Used BT30 ER32 COLLET CHUCK ER32x60 (F) (WR.8.B.B.7)

  • Perth, Ontario, Canada
  • Mar 2nd
Used BT30 ER32 COLLET CHUCK ER32x60 (E) (WR.8.B.B.6)

Used BT30 ER32 COLLET CHUCK ER32x60 (E) (WR.8.B.B.6)

  • Perth, Ontario, Canada
  • Mar 2nd
Used BT30 ER32 COLLET CHUCK ER32x60 (D) (WR.8.B.B.5)

Used BT30 ER32 COLLET CHUCK ER32x60 (D) (WR.8.B.B.5)

  • Perth, Ontario, Canada
  • Mar 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies