+ Post new Ad
WILTON VISE, 4" NEW JAWS, EXTRAS, MODEL 9400/101028, CLEAN! JUNE 1971, US $350 – Picture 0
WILTON VISE, 4" NEW JAWS, EXTRAS, MODEL 9400/101028, CLEAN! JUNE 1971, US $350 – Picture 0

Wilton Vise, 4" New Jaws, Extras, Model 9400/101028, Clean! June 1971

US $350

  • Arlington Heights, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
WILTON VISE, 4" NEW JAWS, EXTRAS, MODEL 9400/101028, CLEAN! JUNE 1971 Description         This model Wilton made 6-71 is in nice condition. I stripped, cleaned,lubed painted it a close Wilton color of today. This model did not come with a emblem sticker so it will come separate so you will have the option of using it or not. Its been fitted with new steel jaws which align up and close nicely, plus you will receive the smooth originals which are in good condition also new finger savers and one new replacement handle.. Overall operation is very good for this 43 year old vise. Handle response is good, it swivels nicely and its ready for your bench. To give it a fresh start, I dressed the jaw towers and lightly sanded the anvil, In one of the photos you will see a drill start mark on the channel bar will at least serve as a reminder that this vise has seen some use. Guys, its the Holiday Season, buy you or yours a Schiller Park Bullet. Wilton never made them better. Any question, please ask me. Shipping will be Fed Ex to the 48 states only. Thanks for looking.   SPECS LENGTH,16" HEIGHT,8 3/4", THROAT,3 3/8", OPENS,6", JAWS,4"W X 1"H, WEIGHT, 50 LBS  
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Wilton

Directions

Similar products from Grips & Tongs

NICE! 3" CAPACITY JACOBS 75 3" WIDE JAWS CROSS SLIDE DRILL PRESS VISE

NICE! 3" CAPACITY JACOBS 75 3" WIDE JAWS CROSS SLIDE DRILL PRESS VISE

  • La Puente, California, United States
  • Jan 30th
Bison MT#3 Precision Live Lathe Center-.0003 TIR

Bison MT#3 Precision Live Lathe Center-.0003 TIR

  • Hamden, Connecticut, United States
  • Jan 30th
Bison MT#4 Bull Head Live Center for Lathe-.0003" TIR

Bison MT#4 Bull Head Live Center for Lathe-.0003" TIR

  • Hamden, Connecticut, United States
  • Jan 30th
Morgan Chicago 4 inch jaw Cast Iron vintage Vise Anvil opens 5 Inches NICE

Morgan Chicago 4 inch jaw Cast Iron vintage Vise Anvil opens 5 Inches NICE

  • New Baltimore, Michigan, United States
  • Jan 30th
Reed No. 106 6" Fixed Vise - Great Condition - Good Jaws - Will Ship - Heavy!!!

Reed No. 106 6" Fixed Vise - Great Condition - Good Jaws - Will Ship - Heavy!!!

  • Palmyra, Pennsylvania, United States
  • Jan 30th
Parker 6" Vise - No. 956 Fixed - Good Jaws - Heavy Vintage Vise - Will Ship!!!

Parker 6" Vise - No. 956 Fixed - Good Jaws - Heavy Vintage Vise - Will Ship!!!

  • Palmyra, Pennsylvania, United States
  • Jan 30th
Override restrictor. Made for Fadal CNC mills. No more accidental knob changes!

Override restrictor. Made for Fadal CNC mills. No more accidental knob changes!

  • Lubbock, Texas, United States
  • Jan 30th
Reed Mfg. Co. Erie PA. Plumber's Bench Vise #72 Cast Iron

Reed Mfg. Co. Erie PA. Plumber's Bench Vise #72 Cast Iron

  • Charlestown, Rhode Island, United States
  • Jan 30th
BRIDGEPORT 6" VISE with swivel and handle for vise

BRIDGEPORT 6" VISE with swivel and handle for vise

  • Monroeville, Indiana, United States
  • Jan 30th
Wilton Vise 106111,106 101 063-2.5

Wilton Vise 106111,106 101 063-2.5

  • Fitzgerald, Georgia, United States
  • Jan 30th
Bessy 4 inch 4" Drill Press Vise

Bessy 4 inch 4" Drill Press Vise

  • Chipley, Florida, United States
  • Jan 30th
Bessy 4.5 inch 4.5" Bench Vise

Bessy 4.5 inch 4.5" Bench Vise

  • Chipley, Florida, United States
  • Jan 30th
Ridgid 72092 Chain Assy

Ridgid 72092 Chain Assy

  • Omaha, Nebraska, United States
  • Jan 30th
RIDGID 41115 Chain Screw Pin

RIDGID 41115 Chain Screw Pin

  • Omaha, Nebraska, United States
  • Jan 30th
knive vice jaws for Kurt or Chick vices

knive vice jaws for Kurt or Chick vices

  • Hamel, Minnesota, United States
  • Jan 30th
Pneumatic Machinist Vise

Pneumatic Machinist Vise

  • Berlin, Connecticut, United States
  • Jan 30th
VINTAGE MACHINIST FLAT METAL STEEL VICE TOOL HOLDER NO 8816 MF CORP USA

VINTAGE MACHINIST FLAT METAL STEEL VICE TOOL HOLDER NO 8816 MF CORP USA

  • Manchester, New Hampshire, United States
  • Jan 30th
Heinrich 4TS Drill Press Speed Vise Jaws Open 4-1/2"

Heinrich 4TS Drill Press Speed Vise Jaws Open 4-1/2"

  • Lorain, Ohio, United States
  • Jan 30th
2-1/2" Toolmakers Vice Base

2-1/2" Toolmakers Vice Base

  • Ellington, New York, United States
  • Jan 30th
Columbia 4 1/2" Vise 604 1/2 Swivel Jaw Bench Table Top Work Clamp Will Ship

Columbia 4 1/2" Vise 604 1/2 Swivel Jaw Bench Table Top Work Clamp Will Ship

  • Du Bois, Pennsylvania, United States
  • Jan 30th

People who viewed this item also vieved

Hardinge 5/C Aluminum Expanding Collet Pad

Hardinge 5/C Aluminum Expanding Collet Pad

  • Rochester, New York, United States
  • Mar 25th
Hardinge Expanding Collet Model "M"

Hardinge Expanding Collet Model "M"

  • Rochester, New York, United States
  • Mar 25th
Hardinge Expanding Collet and Limit Ring for 5/C

Hardinge Expanding Collet and Limit Ring for 5/C

  • Rochester, New York, United States
  • Mar 25th
SIMCO MICRO-GRIND 5C COLLET INDEXER

SIMCO MICRO-GRIND 5C COLLET INDEXER

  • Upland, California, United States
  • May 9th
Precision Ground and Hardened Angle Iron

Precision Ground and Hardened Angle Iron

  • Southbridge, Massachusetts, United States
  • May 10th
CANTILEVER STEEL STORAGE SYTEMS SPACESAVER SINGLE SIDED STORAGE RACK (28903)

CANTILEVER STEEL STORAGE SYTEMS SPACESAVER SINGLE SIDED STORAGE RACK (28903)

  • Cincinnati, Ohio, United States
  • May 10th
Stanley Handyman H152 C-Clamps 2 inch (lot of 2)

Stanley Handyman H152 C-Clamps 2 inch (lot of 2)

  • Phoenixville, Pennsylvania, United States
  • May 16th
Vintage C Clamp Unique C Clamp Tool 11 in tall 8 in wide" Supreme Tool C. Texas

Vintage C Clamp Unique C Clamp Tool 11 in tall 8 in wide" Supreme Tool C. Texas

  • Beverly, Massachusetts, United States
  • May 17th
Nice Used Vintage Pair of L.S. Starrett No. 161-E Machinists Parallel Clamps

Nice Used Vintage Pair of L.S. Starrett No. 161-E Machinists Parallel Clamps

  • Orlando, Florida, United States
  • May 17th
Brand New!! South Bend Grizzly 8" 4-Jaw Plain Back Independent Chuck SB1212

Brand New!! South Bend Grizzly 8" 4-Jaw Plain Back Independent Chuck SB1212

  • Boonville, Missouri, United States
  • May 29th
Lathe 3 jaw Bison 12 " scroll chuck

Lathe 3 jaw Bison 12 " scroll chuck

  • Lakeville, Massachusetts, United States
  • May 30th
Bison 8" 4-Jaw Chuck A2-5

Bison 8" 4-Jaw Chuck A2-5

  • Boulder, Colorado, United States
  • May 31st
BISON Super Precision Live Center Point Length : Overall Length : 4.07''

BISON Super Precision Live Center Point Length : Overall Length : 4.07''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Versa-Turn Live Center - Overall Length : 7-15/16' Taper: 4 MT

ROYAL Versa-Turn Live Center - Overall Length : 7-15/16' Taper: 4 MT

  • Duncan, South Carolina, United States
  • May 24th
Ritten - Bloomingburg O. Live Center (8D)

Ritten - Bloomingburg O. Live Center (8D)

  • Waverly, Ohio, United States
  • May 24th
Hwacheon Hi-Tech 100B 2-Axis CNC Lathe, 8” Chuck, Year 2000

Hwacheon Hi-Tech 100B 2-Axis CNC Lathe, 8” Chuck, Year 2000

  • Watertown, Connecticut, United States
  • May 31st
MACHINIST TOOLS LATHE MILL Machinist Large Screw Jack for Set Up Hold Down

MACHINIST TOOLS LATHE MILL Machinist Large Screw Jack for Set Up Hold Down

  • Morris Plains, New Jersey, United States
  • May 31st
Kitagawa F1236HN-28F Hydraulic Actuator Cylinder-Refurbished-with exchange $900.

Kitagawa F1236HN-28F Hydraulic Actuator Cylinder-Refurbished-with exchange $900.

  • Lagrange, Ohio, United States
  • May 31st
BRIDGEPORT ARBOR SUPPORT FOR No 3 BRIDGEPORT RIGHT ANGLE HEAD

BRIDGEPORT ARBOR SUPPORT FOR No 3 BRIDGEPORT RIGHT ANGLE HEAD

  • Pinellas Park, Florida, United States
  • Jun 4th
TAILSTOCK FOR VAN NORMAN DIVIDING HEAD,OTHER WORK HOLDING FIXTURES

TAILSTOCK FOR VAN NORMAN DIVIDING HEAD,OTHER WORK HOLDING FIXTURES

  • Pinellas Park, Florida, United States
  • Jun 4th
TAILSTOCK FOR ROTARY TABLE OR INDEXER,OTHER WORK HOLDING FIXTURES

TAILSTOCK FOR ROTARY TABLE OR INDEXER,OTHER WORK HOLDING FIXTURES

  • Pinellas Park, Florida, United States
  • Jun 4th
3/4" x 3/4" x 6” Magnetic Machine Parallel Machinist Tool

3/4" x 3/4" x 6” Magnetic Machine Parallel Machinist Tool

  • Euclid, Ohio, United States
  • Jun 4th
BROWN & SHARPE 11/16” x 3-3/4” x 7-1/2” Magnetic Machine Parallel Machinist

BROWN & SHARPE 11/16” x 3-3/4” x 7-1/2” Magnetic Machine Parallel Machinist

  • Euclid, Ohio, United States
  • Jun 4th
BROWN & SHARPE 11/16” x 3-5/8” x 7-1/2” Magnetic Machine Parallel Machinist

BROWN & SHARPE 11/16” x 3-5/8” x 7-1/2” Magnetic Machine Parallel Machinist

  • Euclid, Ohio, United States
  • Jun 4th
Hardinge 3" O.C Step Chuck Closer. New!!!

Hardinge 3" O.C Step Chuck Closer. New!!!

  • Rancho Cucamonga, California, United States
  • Jun 9th
Hardinge 2" Extra Depth 5C Step Collet Chucks! Set of 3! New!!

Hardinge 2" Extra Depth 5C Step Collet Chucks! Set of 3! New!!

  • Rancho Cucamonga, California, United States
  • Jun 9th
Collet Rotary Index Fixture

Collet Rotary Index Fixture

  • Lowell, Indiana, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies