+ Post new Ad
WILTON VISE, MECHANICS COMBO, MODEL744, 21300, 4" JAWS, PIPE JAWS, NEW!!, US $135.00 – Picture 0
WILTON VISE, MECHANICS COMBO, MODEL744, 21300, 4" JAWS, PIPE JAWS, NEW!!, US $135.00 – Picture 0

Wilton Vise, Mechanics Combo, Model744, 21300, 4" Jaws, Pipe Jaws, New!!

US $135.00

  • Arlington Heights, Illinois, United States
  • Jun 9th
Open on mobile:
QR code
WILTON VISE, MECHANICS COMBO, 4" JAWS, PIPE JAWS, NEW!! Description This is a brand new Wilton Mechanics Combo, powder coated and original. Its 12" long and sitting right under 8" high which makes it stout with tremendous bite with the Wilton Patented straight line pull and enclosed channel design found in their higher end vises. Nothing beats a enclosed channel for keeping the slide bar free from not only debris but also the Almighty Hammer. . Its new in the box and never mounted, operation is firm, handle response quick, rotates 360 and locks down tightly. The top jaws align up nicely when closed and the Tradesman pipe jaws are a plus. Its everything you would want in a smaller bench vise and you will be its 1st  real user. It will be shipped Fed Ex to your door in the original fresh Wilton box it came in. Shipping will be Fed Ex only, no P.O boxes please. Any questions, please ask me. Thanks for looking. SPECS: LENGTH 12", HEIGHT,7 7/8', OPENS,4", THROAT, 3 3/8", JAWS, 4"W X 3/4"H, WEIGHT, 38 LBS.  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Wilton

Directions

Similar products from Grips & Tongs

Old -Vintage ~ Antique ~ Fly Fishing ~ Tying Vise ~ Marked WORTH RAY GERMANY --.

Old -Vintage ~ Antique ~ Fly Fishing ~ Tying Vise ~ Marked WORTH RAY GERMANY --.

  • Calais, Maine, United States
  • Jun 9th
Old -Vintage ~ Antique ~ Fly Fishing ~ Tying Vise ~ Unmarked

Old -Vintage ~ Antique ~ Fly Fishing ~ Tying Vise ~ Unmarked

  • Calais, Maine, United States
  • Jun 9th
COLUMBIAN Vise (D33 1/2)

COLUMBIAN Vise (D33 1/2)

  • Jefferson City, Missouri, United States
  • Jun 9th
Interstate 3-7/8" Jaw Width 4-3/4" Opening Toolmaker's Vise

Interstate 3-7/8" Jaw Width 4-3/4" Opening Toolmaker's Vise

  • Venice, Florida, United States
  • Jun 9th
Vintage Vulcan No.1 Chain Pipe Vise by J.H. Williams & Co with mounting plate

Vintage Vulcan No.1 Chain Pipe Vise by J.H. Williams & Co with mounting plate

  • Glenoma, Washington, United States
  • Jun 9th
Wilton vise 5" jaws

Wilton vise 5" jaws

  • Gold Hill, Oregon, United States
  • Jun 9th
Tool maker precision grinding vice.

Tool maker precision grinding vice.

  • Statesville, North Carolina, United States
  • Jun 9th
WILTON BULLET VISE BRASS JAW PROTECTORS 4 INCH VINTAGE WILTON VISE PARTS

WILTON BULLET VISE BRASS JAW PROTECTORS 4 INCH VINTAGE WILTON VISE PARTS

  • Chillicothe, Illinois, United States
  • Jun 9th
ANTIQUE DUNLAP VISE SWIVEL & AVIL WITH 3-1/2" CLAMP. WORKS GREAT, MADE IN USA

ANTIQUE DUNLAP VISE SWIVEL & AVIL WITH 3-1/2" CLAMP. WORKS GREAT, MADE IN USA

  • Yucca Valley, California, United States
  • Jun 9th
Desmond Stephan No. 350 3-1/2" Vise 1809-1

Desmond Stephan No. 350 3-1/2" Vise 1809-1

  • Hillsdale, New Jersey, United States
  • Jun 9th
VINTAGE REED PIPE VISE . ERIE PA. #70 FOR PARTS OR REPAIR PAT 1914

VINTAGE REED PIPE VISE . ERIE PA. #70 FOR PARTS OR REPAIR PAT 1914

  • West Sand Lake, New York, United States
  • Jun 9th
Craftsman 391-5180 3-1/2" Vise 5183-5

Craftsman 391-5180 3-1/2" Vise 5183-5

  • Hillsdale, New Jersey, United States
  • Jun 9th
ANTIQUE UNKNOWN MAKER CAST IRON MINIATURE VISE UN-MARKED GOOD CONDITION

ANTIQUE UNKNOWN MAKER CAST IRON MINIATURE VISE UN-MARKED GOOD CONDITION

  • Coventry, Connecticut, United States
  • Jun 9th
VINTAGE SHARP CAST IRON MINIATURE VISE MARKED SHARP GERMANY GOOD CONDITION

VINTAGE SHARP CAST IRON MINIATURE VISE MARKED SHARP GERMANY GOOD CONDITION

  • Coventry, Connecticut, United States
  • Jun 9th
Vintage Wilton Shop King Combination Swivel Bench Vise 5" Jaws Machinist CHICAGO

Vintage Wilton Shop King Combination Swivel Bench Vise 5" Jaws Machinist CHICAGO

  • Streator, Illinois, United States
  • Jun 9th
VINTAGE MACHINIST VISE OR CLAMP

VINTAGE MACHINIST VISE OR CLAMP

  • San Jose, California, United States
  • Jun 9th
Starrett No 160 Mini Vice clamp for jewelers and watches

Starrett No 160 Mini Vice clamp for jewelers and watches

  • Lincoln, California, United States
  • Jun 9th
Large Machinist 4" Swivel Base 4C Vise C4 Woodworking Table Vise

Large Machinist 4" Swivel Base 4C Vise C4 Woodworking Table Vise

  • Costa Mesa, California, United States
  • Jun 9th
Ridgid BC-210 Chain Vise 1/8"- 2 1/2" Pipes

Ridgid BC-210 Chain Vise 1/8"- 2 1/2" Pipes

  • Mount Morris, Michigan, United States
  • Jun 9th
Estate Vintage Machinist Lakeside Anvil Swivel Bench Vise # 27 Workholding Tool

Estate Vintage Machinist Lakeside Anvil Swivel Bench Vise # 27 Workholding Tool

  • Woonsocket, Rhode Island, United States
  • Jun 9th

People who viewed this item also vieved

Riten 9 Jarno CT Full Dead Center

Riten 9 Jarno CT Full Dead Center

  • Loranger, Louisiana, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Live Center s for Lathe

MACHINIST LATHE MILL Lot of Live Center s for Lathe

  • Morris Plains, New Jersey, United States
  • Jan 30th
Rockwell lathe centers&safty type dogs

Rockwell lathe centers&safty type dogs

  • Bristol, New Hampshire, United States
  • Jan 30th
PRODUCTION DYNAMICS FB1032ANRBLD NEW FB10-32A AIR CHUCK REBUILD KIT FB1032ANRBLD

PRODUCTION DYNAMICS FB1032ANRBLD NEW FB10-32A AIR CHUCK REBUILD KIT FB1032ANRBLD

  • Yale, Michigan, United States
  • Jan 30th
Octagonal Vacuum Chuck with Two Vacuum Surface Plates

Octagonal Vacuum Chuck with Two Vacuum Surface Plates

  • Rochester, New York, United States
  • Jan 30th
8" 4-Jaw Self-Centering Lathe Chuck w. top&bottom jaws-0.003" TIR #K12-200C-new

8" 4-Jaw Self-Centering Lathe Chuck w. top&bottom jaws-0.003" TIR #K12-200C-new

  • Madison Heights, Michigan, United States
  • Jan 30th
STRIAGH LINE FLANGED BASE TOGGLE CLAMP WITH 100 LBS HOLDING CAPACITY (3900-0386)

STRIAGH LINE FLANGED BASE TOGGLE CLAMP WITH 100 LBS HOLDING CAPACITY (3900-0386)

  • Chino, California, United States
  • Jan 30th
VERTICAL STRAIGHT BASE TOGGLE CLAMP WITH U-BAR (3900-0342)

VERTICAL STRAIGHT BASE TOGGLE CLAMP WITH U-BAR (3900-0342)

  • Chino, California, United States
  • Jan 30th
VERTICAL FLANGED BASE TOGGLE CLAMP WITH U-BAR (3900-0341)

VERTICAL FLANGED BASE TOGGLE CLAMP WITH U-BAR (3900-0341)

  • Chino, California, United States
  • Jan 30th
1PCS MT3 ER16 M12 collet Morse taper Tool holder collet chuck Holder

1PCS MT3 ER16 M12 collet Morse taper Tool holder collet chuck Holder

  • shenzhen, China
  • Jan 30th
New Precision MT2 ER16 m10 collet chuck Morse taper Toolholder

New Precision MT2 ER16 m10 collet chuck Morse taper Toolholder

  • shenzhen, China
  • Jan 30th
New SELUX BT30-ER20-70L Collet Chuck CNC Milling Tool-Holder

New SELUX BT30-ER20-70L Collet Chuck CNC Milling Tool-Holder

  • New Britain, Connecticut, United States
  • Jan 30th
15 QUALITY IMPORT EXTENDED NOSE METRIC COLLETS?, 12mm, 8mm, 5mm

15 QUALITY IMPORT EXTENDED NOSE METRIC COLLETS?, 12mm, 8mm, 5mm

  • Euclid, Ohio, United States
  • Jan 30th
3/4" R8 Collet

3/4" R8 Collet

  • Rochester, Minnesota, United States
  • Jan 30th
HARDINGE & OTHER BRAND 4NS COLLETS FIT GORTON UNIVERSAL TOOL CUTTER GRINDER

HARDINGE & OTHER BRAND 4NS COLLETS FIT GORTON UNIVERSAL TOOL CUTTER GRINDER

  • La Puente, California, United States
  • Jan 30th
de Whiton Machine Co 14" lathe chuck independent reversible 4 jaw. D1mount

de Whiton Machine Co 14" lathe chuck independent reversible 4 jaw. D1mount

  • DeKalb, Illinois, United States
  • Jan 30th
NOS Busch Precision USA 8"X8"X6" SLOTTED GROUND ANGLE PLATE #3528 LIST $875

NOS Busch Precision USA 8"X8"X6" SLOTTED GROUND ANGLE PLATE #3528 LIST $875

  • Perth, Ontario, Canada
  • Jan 30th
Hydramax 5ST Vise Jaw for Kurt CNC Vise Haas ,Mori Seki , Fadal CNC Mill

Hydramax 5ST Vise Jaw for Kurt CNC Vise Haas ,Mori Seki , Fadal CNC Mill

  • Monmouth, Oregon, United States
  • Jan 30th
Martin 50BTB22 Taper Lock Sprocket 2 1/4" to 2 1/8" Bore

Martin 50BTB22 Taper Lock Sprocket 2 1/4" to 2 1/8" Bore

  • Bay City, Michigan, United States
  • Jan 30th
Martin 50SDS21 X 1 1/4 Sprocket 1 1/4" Bore with 1/4" keyway - NEW

Martin 50SDS21 X 1 1/4 Sprocket 1 1/4" Bore with 1/4" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Browning 50P20 X 1 7/8 Sprocket 1 7/8" Bore with 3/8" keyway - NEW

Browning 50P20 X 1 7/8 Sprocket 1 7/8" Bore with 3/8" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Hartford 8" Super Spacer with 2 Additional Plates

Hartford 8" Super Spacer with 2 Additional Plates

  • Johnson City, New York, United States
  • Jan 30th
High Quality CNC machine 4thAxis (A Axis,rotation axis)+tailstock for CNC router

High Quality CNC machine 4thAxis (A Axis,rotation axis)+tailstock for CNC router

  • Shenzhen, China
  • Jan 30th
NICE! TROYKE 12" VERTICAL HORIZONTAL ROTARY TABLE MODEL #U-12

NICE! TROYKE 12" VERTICAL HORIZONTAL ROTARY TABLE MODEL #U-12

  • Chino, California, United States
  • Jan 30th
SHOP MADE MACHINIST LARGE MATCHING V BLOCKS

SHOP MADE MACHINIST LARGE MATCHING V BLOCKS

  • Lindale, Texas, United States
  • Feb 13th
L.S. STARRETT NO.568 V-BLOCK AND CLAMP

L.S. STARRETT NO.568 V-BLOCK AND CLAMP

  • Newport, Maine, United States
  • Feb 13th
VINTAGE WEBBER MICRO ACCURATE GAGES - MACHINIST METAL BLOCKS - W/ CASE

VINTAGE WEBBER MICRO ACCURATE GAGES - MACHINIST METAL BLOCKS - W/ CASE

  • United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies