+ Post new Ad
Wire EDM Rail system (Mits 10 table), US $3,300.00 – Picture 0
Wire EDM Rail system (Mits 10 table), US $3,300.00 – Picture 1
Wire EDM Rail system (Mits 10 table), US $3,300.00 – Picture 2
Wire EDM Rail system (Mits 10 table), US $3,300.00 – Picture 0
Wire EDM Rail system (Mits 10 table), US $3,300.00 – Picture 1
Wire EDM Rail system (Mits 10 table), US $3,300.00 – Picture 2

Wire Edm Rail System (mits 10 Table)

US $3,300.00

  • Rochester, New York, United States
  • Jan 30th
Open on mobile:
QR code
 Wire EDM Rail system This is a custom built Rail system to fit your Mits 10 Wire EDM machine (all parts made in the US)     (2) Rails  (1.0" thick  X  2.5" wide  X  up to 20" (x axis table size)) (the Lip dimension is .100 thick and .150 deep) (1) Mount block (stand alone)(can be used without rails (1) Mount block (used with rail system) (1) Vise (1) Duel V-Block (1) M8 clamp set all parts are made with 420 stainless steel and hardened to 45-55 RC (unless specified) Socket Head Cap Screws(SHCS) are stainless (cap screw size may very based on what your machine uses) Main Rails are precision ground +/-.0002" flat/parallel. There are  slots located on the rail for easy pick up of work piece. Feel free to ask any questions. PayPal is the desired form of payment. We will also except check or money order. also willing to offer terms on payment with final payment due on delivery(COD). Send us a message if you would like to pay without using PayPal or have an interest in setting up payment terms. Thanks Brad

Directions

Similar products from Electrical Discharge Machine Tools

Hirschmann Wire EDM Chuck

Hirschmann Wire EDM Chuck

  • Millstone Township, New Jersey, United States
  • Jan 30th
NICE!! EDM TAPPED HOLE WORKHOLDING FIXTURE - 10-32 TAPPED HOLES

NICE!! EDM TAPPED HOLE WORKHOLDING FIXTURE - 10-32 TAPPED HOLES

  • Covina, California, United States
  • Jan 30th
Ebbco Hurricane Vessel package filtration system, wire edm

Ebbco Hurricane Vessel package filtration system, wire edm

  • Lewisville, Pennsylvania, United States
  • Jan 30th
MITSUBISHI M55K RAM TYPE DIE SINKER EDM

MITSUBISHI M55K RAM TYPE DIE SINKER EDM

  • Helena, Alabama, United States
  • Jan 30th
Mecatool C 186200 EDM Machine Chuck - EU4

Mecatool C 186200 EDM Machine Chuck - EU4

  • Bloomfield, Connecticut, United States
  • Jan 30th
Mecatool C 231000 EDM Machine Chuck - EU5

Mecatool C 231000 EDM Machine Chuck - EU5

  • Bloomfield, Connecticut, United States
  • Jan 30th
Mecatool C 231000 EDM Machine Chuck - EU6

Mecatool C 231000 EDM Machine Chuck - EU6

  • Bloomfield, Connecticut, United States
  • Jan 30th
Mecatool C 188000 EDM Machine Chuck - EU7

Mecatool C 188000 EDM Machine Chuck - EU7

  • Bloomfield, Connecticut, United States
  • Jan 30th
Wire EDM Small Part Fixture

Wire EDM Small Part Fixture

  • Rochester, New York, United States
  • Jan 30th
Wire EDM Vise and mount block

Wire EDM Vise and mount block

  • Rochester, New York, United States
  • Jan 30th
Hitachi Seiki EDM Board S-PLS I/F 68E3.157203

Hitachi Seiki EDM Board S-PLS I/F 68E3.157203

  • Karachi, Pakistan
  • Jan 30th
New Adjustable EDM Electrode Holder / Calibrating Head for EDM machine

New Adjustable EDM Electrode Holder / Calibrating Head for EDM machine

  • Hong Kong, China
  • Jan 30th
System 3R-239-410 Wire EDM 3Ruler 410mm Long + 1 Fixture #1

System 3R-239-410 Wire EDM 3Ruler 410mm Long + 1 Fixture #1

  • Ukraine, Ukraine
  • Jan 30th
4) POCO UNOCAL Graphite Boats SPD-35 DFP-3-2

4) POCO UNOCAL Graphite Boats SPD-35 DFP-3-2

  • Dallas, Texas, United States
  • Jan 30th
Hirschmann Wire EDM # H9003 PVI INDEXER WITH PLATES

Hirschmann Wire EDM # H9003 PVI INDEXER WITH PLATES

  • Rochester, Michigan, United States
  • Jan 30th
OMEGA 600 COMPACT SINKER EDM, NEW 1986, GREAT CONDITION! SEE PHOTOS!

OMEGA 600 COMPACT SINKER EDM, NEW 1986, GREAT CONDITION! SEE PHOTOS!

  • Watertown, Connecticut, United States
  • Jan 30th
Wire EDM Rails for a Charmilles 330F

Wire EDM Rails for a Charmilles 330F

  • Rochester, New York, United States
  • Jan 30th
OKI BELMONT 815-104-X PSX EDM WIRE .010 ( 0.25mm) DIA X 11# OB-25PSX (P-5R) NEW

OKI BELMONT 815-104-X PSX EDM WIRE .010 ( 0.25mm) DIA X 11# OB-25PSX (P-5R) NEW

  • Mount Pleasant, Michigan, United States
  • Jan 30th
System 3R Wire EDM 3Ruler Dovetail Rail Block 450mm Long WEDM Erodieren

System 3R Wire EDM 3Ruler Dovetail Rail Block 450mm Long WEDM Erodieren

  • Ukraine, Ukraine
  • Jan 30th
LOT OF 8 PIECES 3R SYSTEMS MAKINO EDM TOOLING YU YH SINKER HEAD MOUNTS Y TYPE

LOT OF 8 PIECES 3R SYSTEMS MAKINO EDM TOOLING YU YH SINKER HEAD MOUNTS Y TYPE

  • Pataskala, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

Vintage Armstrong metal lathe turning tool holder NO. T2-L

Vintage Armstrong metal lathe turning tool holder NO. T2-L

  • Sanford, Florida, United States
  • May 24th
24" MAZAK ENGINE LATHE

24" MAZAK ENGINE LATHE

  • Phoenix, Arizona, United States
  • May 24th
Lot of 2 Vintage Armstrong metal lathe turning tool holder NO. 2-L

Lot of 2 Vintage Armstrong metal lathe turning tool holder NO. 2-L

  • Sanford, Florida, United States
  • May 24th
PM-25-MV BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIP! BRUSHLESS MOTOR!

PM-25-MV BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIP! BRUSHLESS MOTOR!

  • Pittsburgh, Pennsylvania, United States
  • May 25th
PM-935TS 9"x35" VERTICAL MILLING MACHINE, 5 YEAR WARRANTY FREE SHIPPING TAIWAN

PM-935TS 9"x35" VERTICAL MILLING MACHINE, 5 YEAR WARRANTY FREE SHIPPING TAIWAN

  • Pittsburgh, Pennsylvania, United States
  • May 25th
#9704: Bridgeport Series I CNC Vertical Milling Machine

#9704: Bridgeport Series I CNC Vertical Milling Machine

  • Orange City, Iowa, United States
  • May 25th
All Tool Grinding Indexer with Hardinge 5c Collets

All Tool Grinding Indexer with Hardinge 5c Collets

  • Matawan, New Jersey, United States
  • May 28th
St Marys Spin Roll for Punch & Pin Grinding

St Marys Spin Roll for Punch & Pin Grinding

  • Matawan, New Jersey, United States
  • May 28th
Fellows Rack Shaper 3 x 48 Just came out of service from Boeing Loaded W/Gears

Fellows Rack Shaper 3 x 48 Just came out of service from Boeing Loaded W/Gears

  • Santa Paula, California, United States
  • May 28th
Luma Electric Equipment Co. Resistance Electric Etcher Model # 60

Luma Electric Equipment Co. Resistance Electric Etcher Model # 60

  • Williamsburg, Ohio, United States
  • May 28th
PRINCIPLES OF ALTERNATING-CURRENT MACHINERY Book by Lawrence 1940 4 machinists

PRINCIPLES OF ALTERNATING-CURRENT MACHINERY Book by Lawrence 1940 4 machinists

  • Perth, Ontario, Canada
  • May 28th
DELTA VERTICAL BANDSAW 20 24" x 24" TABLE High Speed Aluminum Wood Brass

DELTA VERTICAL BANDSAW 20 24" x 24" TABLE High Speed Aluminum Wood Brass

  • Pomona, California, United States
  • May 29th
JET EQUIPMENT AND TOOLS VBS 400 VERTICAL BANDSAW

JET EQUIPMENT AND TOOLS VBS 400 VERTICAL BANDSAW

  • Rice, Minnesota, United States
  • May 29th
Acra UE712 Vertical/Horizontal Bandsaw

Acra UE712 Vertical/Horizontal Bandsaw

  • Fresno, California, United States
  • May 29th
Dumore Tool Post Grinder

Dumore Tool Post Grinder

  • Miamiville, Ohio, United States
  • May 29th
M2-M7 (5/64-1/4) Auto Reversing Tapping Head JSN7

M2-M7 (5/64-1/4) Auto Reversing Tapping Head JSN7

  • Morgan City, Louisiana, United States
  • May 29th
7.0MM RUBBER FLEX COLLET (3900-1783)

7.0MM RUBBER FLEX COLLET (3900-1783)

  • Chino, California, United States
  • May 29th
14.0MM RUBBER FLEX COLLET (3900-1786)

14.0MM RUBBER FLEX COLLET (3900-1786)

  • Chino, California, United States
  • May 29th
Ironworker Angle Shear Attachment

Ironworker Angle Shear Attachment

  • Piedmont, South Carolina, United States
  • May 31st
EVERETT IND 20AA22 20-22" Abrasive Mitering Dry Cut Off Saw Automatic 20HP 3Ph

EVERETT IND 20AA22 20-22" Abrasive Mitering Dry Cut Off Saw Automatic 20HP 3Ph

  • Middlebury, Indiana, United States
  • May 31st
Article Plans How To Make A Simple Arbor Press For Work Shop Metal Working #246

Article Plans How To Make A Simple Arbor Press For Work Shop Metal Working #246

  • Port Alberni, British Columbia, Canada
  • May 31st
Sunen Stone and Speed Selector Guide

Sunen Stone and Speed Selector Guide

  • Brighton, Michigan, United States
  • Jun 1st
Sunnen Stones L20-A75 , lot of 2

Sunnen Stones L20-A75 , lot of 2

  • Halls, Tennessee, United States
  • Jun 1st
Madison Microller Burnishing Tool .375" 1MT Morse Taper Shank

Madison Microller Burnishing Tool .375" 1MT Morse Taper Shank

  • Kennedy, New York, United States
  • Jun 1st
GEOMETRIC 9/16” DSA Diehead 1" Shank

GEOMETRIC 9/16” DSA Diehead 1" Shank

  • Euclid, Ohio, United States
  • Jun 5th
GEOMETRIC 9/16” DS Diehead 3/4" Shank

GEOMETRIC 9/16” DS Diehead 3/4" Shank

  • Euclid, Ohio, United States
  • Jun 5th
GEOMETRIC 9/16” DS Diehead 5/8" Shank

GEOMETRIC 9/16” DS Diehead 5/8" Shank

  • Euclid, Ohio, United States
  • Jun 5th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies