+ Post new Ad
WOODWORTH ZERO SPINDLE SYSTEMS SPINDLE FIXTURE MODEL AD-015, US $599.99 – Picture 0
WOODWORTH ZERO SPINDLE SYSTEMS SPINDLE FIXTURE MODEL AD-015, US $599.99 – Picture 1
WOODWORTH ZERO SPINDLE SYSTEMS SPINDLE FIXTURE MODEL AD-015, US $599.99 – Picture 0
WOODWORTH ZERO SPINDLE SYSTEMS SPINDLE FIXTURE MODEL AD-015, US $599.99 – Picture 1

Woodworth Zero Spindle Systems Spindle Fixture Model Ad-015

US $599.99

  • Rochester, New York, United States
  • Jan 30th
Open on mobile:
QR code
SquareTrade © AP6.0  WOODWORTH ZERO SPINDLE SYSTEMS SPINDLE FIXTURE MODEL AD-015     You are Purchasing a Woodworth Zero Spindle Systems Spindle Fixture. Model: AD-015     Zero Spindles are a complete inspection system for inspecting concentricity, squareness, roundness, and diameter. ACCURATE: - To less than .000025" RUGGED: - Sturdy enough for the production floor, needs no pampering. VERSATILE: - Combine with arbors, chucks, face plates, lead locks and specially designed fixtures. ECONOMICAL: - Laboratory accuracy on the shop floor. New Cost over $2,000 This Spindle Fixture is in Great Condition and fully guaranteed.  Shipping and Handling is $19.90 in the Continental USA. ~ International bidders are always welcome ~   - We always combine shipping to give you the lowest cost. - On Jul-19-14 at 21:15:17 PDT, seller added the following information:
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand WOODWORTHZERO SPINDLE SYSTEMS
Model AD-015

Directions

Similar products from Other Tool Retention Items

(#4224C) Used Machinist 1/2” HT American Made Split Sleeve Tap Driver

(#4224C) Used Machinist 1/2” HT American Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Jan 30th
5/16-24 GH3 4Flute Taper Length Lead Bright Tap NEW Greenfield Brand 1 pc

5/16-24 GH3 4Flute Taper Length Lead Bright Tap NEW Greenfield Brand 1 pc

  • Trenton, Michigan, United States
  • Jan 30th
98) NEW AMEC REVOLUTION DRILL RANGE CARTRIDGE ADJUSTABLE C54-ADJ

98) NEW AMEC REVOLUTION DRILL RANGE CARTRIDGE ADJUSTABLE C54-ADJ

  • Barrington, Illinois, United States
  • Jan 30th
67) NEW SANDVIK COROMANT RF123H079-16B-052BM 1M 0832344 WITH WRENCH

67) NEW SANDVIK COROMANT RF123H079-16B-052BM 1M 0832344 WITH WRENCH

  • Barrington, Illinois, United States
  • Jan 30th
64) DELTRONIC GAGE PIN 285-6 1 MICRO INCH SURFACE FINISH CONCENTRIC ENDS

64) DELTRONIC GAGE PIN 285-6 1 MICRO INCH SURFACE FINISH CONCENTRIC ENDS

  • Barrington, Illinois, United States
  • Jan 30th
tool insert holder for carbide inserts

tool insert holder for carbide inserts

  • Bentonville, Arkansas, United States
  • Jan 30th
lathe tool ,holder for carbide inserts

lathe tool ,holder for carbide inserts

  • Bentonville, Arkansas, United States
  • Jan 30th
OK Tool Holder For Shaper

OK Tool Holder For Shaper

  • Stockton, Illinois, United States
  • Jan 30th
Allied Machine & Engineering Opening Drill Rough Boring Tool #OP4-1L-SS2.0 NEW

Allied Machine & Engineering Opening Drill Rough Boring Tool #OP4-1L-SS2.0 NEW

  • Arnold, Missouri, United States
  • Jan 30th
Fowler Digital 6" Depth Gauge IP54 54-225-456

Fowler Digital 6" Depth Gauge IP54 54-225-456

  • Mooresville, North Carolina, United States
  • Jan 30th
Wedge for Hardinge Lathe Tool Holder

Wedge for Hardinge Lathe Tool Holder

  • Indianapolis, Indiana, United States
  • Jan 30th
THREADING TOOL HOLDER, MACHINIST'S TOOL HOLDER

THREADING TOOL HOLDER, MACHINIST'S TOOL HOLDER

  • Hope, Arkansas, United States
  • Jan 30th
Carboloy 2 Lathe Indexable Indexing Insert Tool holder MSSNL-16-4 Shank

Carboloy 2 Lathe Indexable Indexing Insert Tool holder MSSNL-16-4 Shank

  • Huntington Beach, California, United States
  • Jan 30th
MANCHESTER INDEXABLE GROOVING CARTRIDGE #338-124

MANCHESTER INDEXABLE GROOVING CARTRIDGE #338-124

  • Wadley, Alabama, United States
  • Jan 30th
C10 C-10 TOOL HOLDERS - COPIES OF HARDINGE C10 TOOLHOLDERS - 2 PIECES - LOT #3

C10 C-10 TOOL HOLDERS - COPIES OF HARDINGE C10 TOOLHOLDERS - 2 PIECES - LOT #3

  • Isanti, Minnesota, United States
  • Jan 30th
ER-16 TAPPING HOLDER - 3/4" SHANK - 1/2 PRICE

ER-16 TAPPING HOLDER - 3/4" SHANK - 1/2 PRICE

  • Isanti, Minnesota, United States
  • Jan 30th
Erickson 1 1/4" Shank DA400 Collet Chuck Extension Holders (2X)

Erickson 1 1/4" Shank DA400 Collet Chuck Extension Holders (2X)

  • Blue Springs, Missouri, United States
  • Jan 30th
Drill Chuck 1/32" to 1/2" Cap, JT6 1/2" Dia. Straight Shank

Drill Chuck 1/32" to 1/2" Cap, JT6 1/2" Dia. Straight Shank

  • Blue Springs, Missouri, United States
  • Jan 30th
Erickson 1 1/4" Shank DA400 Collet Chuck Extension Holder

Erickson 1 1/4" Shank DA400 Collet Chuck Extension Holder

  • Blue Springs, Missouri, United States
  • Jan 30th
Kennametal 3/4" Dia. Shank DA200 Collet Chuck Extension Holders (3 total!!)

Kennametal 3/4" Dia. Shank DA200 Collet Chuck Extension Holders (3 total!!)

  • Blue Springs, Missouri, United States
  • Jan 30th

People who viewed this item also vieved

CAT 40 ER20 COLLET CHUCK 5.9 PROJECTION STK 9178

CAT 40 ER20 COLLET CHUCK 5.9 PROJECTION STK 9178

  • Wadley, Alabama, United States
  • May 24th
CAT 40 3/8" END MILL HOLDER 5" PROJECTION STK 9212

CAT 40 3/8" END MILL HOLDER 5" PROJECTION STK 9212

  • Wadley, Alabama, United States
  • May 25th
1 NEW 3/4" HEAVY METAL BORING BAR. SCLCR-3 TAKES CCMT #3 INSERT. USA MADE {J132}

1 NEW 3/4" HEAVY METAL BORING BAR. SCLCR-3 TAKES CCMT #3 INSERT. USA MADE {J132}

  • Mentor, Ohio, United States
  • May 26th
NEW 3/4" CARBIDE BORING BAR C12-SCLCR-3. W/ 10 SUMITOMO 32.51 INSERTS (X379A)

NEW 3/4" CARBIDE BORING BAR C12-SCLCR-3. W/ 10 SUMITOMO 32.51 INSERTS (X379A)

  • Mentor, Ohio, United States
  • May 26th
Dake arbor press X

Dake arbor press X

  • Ogdensburg, New York, United States
  • May 28th
50 Taper MT4 Adapter

50 Taper MT4 Adapter

  • Great Falls, Montana, United States
  • May 28th
Kennametal Tool Holder 5/8" SHANK KTDR 85C Metal Lathe Post Indexable TP-43

Kennametal Tool Holder 5/8" SHANK KTDR 85C Metal Lathe Post Indexable TP-43

  • Yorktown, Virginia, United States
  • May 28th
Kennametal 1" SHANK KTGR 85C Metal LATHE TURNING TOOL HOLDER Indexable TP-43

Kennametal 1" SHANK KTGR 85C Metal LATHE TURNING TOOL HOLDER Indexable TP-43

  • Yorktown, Virginia, United States
  • May 28th
Dodge / Horton 7H 2517 Poly-Disc Coupling Flange Bushing 008045 NEW IN BOX!

Dodge / Horton 7H 2517 Poly-Disc Coupling Flange Bushing 008045 NEW IN BOX!

  • Marion, Massachusetts, United States
  • May 29th
Bronze Bushing 2 x 2-1/4 x 3" Oilite Sleeve Bearing SS6472-48 Oil Impregnated

Bronze Bushing 2 x 2-1/4 x 3" Oilite Sleeve Bearing SS6472-48 Oil Impregnated

  • Dothan, Alabama, United States
  • May 29th
PARLEC BT 40 ER32 COLLET CHUCK 4" PROJECTION STK 9069

PARLEC BT 40 ER32 COLLET CHUCK 4" PROJECTION STK 9069

  • Wadley, Alabama, United States
  • May 31st
PARLEC BT 40 ER32 COLLET CHUCK 4" PROJECTION STK 9068

PARLEC BT 40 ER32 COLLET CHUCK 4" PROJECTION STK 9068

  • Wadley, Alabama, United States
  • May 31st
KENNAMETAL ERICKSON QUICK CHANGE NMTB 30 5/8" END MILL TOOL HOLDER LOT C12752

KENNAMETAL ERICKSON QUICK CHANGE NMTB 30 5/8" END MILL TOOL HOLDER LOT C12752

  • Dayton, Ohio, United States
  • Jun 9th
KWIK SWITCH 200 3/4" DIAMETER ENDMILL HOLDER END MILL MORE LISTED LOT C9963

KWIK SWITCH 200 3/4" DIAMETER ENDMILL HOLDER END MILL MORE LISTED LOT C9963

  • Dayton, Ohio, United States
  • Jun 9th
Dealt 3/8 drill Chuck.

Dealt 3/8 drill Chuck.

  • Corbin, Kentucky, United States
  • Jun 9th
JACOBS MODEL 7B 7 B DRILL CHUCK 0"-1/4" 3/8"-24 THREAD

JACOBS MODEL 7B 7 B DRILL CHUCK 0"-1/4" 3/8"-24 THREAD

  • Townsend, Delaware, United States
  • Jun 9th
Cleveland Mandrel For Lathe 7/32"

Cleveland Mandrel For Lathe 7/32"

  • Ansonia, Connecticut, United States
  • Jun 23rd
Cleveland Mandrel For Lathe 9/32"

Cleveland Mandrel For Lathe 9/32"

  • Ansonia, Connecticut, United States
  • Jun 23rd
Square 2.2KW Air Cooled Spindle Motor ER20 24000rpm 220VAC 400Hz For CNC Router

Square 2.2KW Air Cooled Spindle Motor ER20 24000rpm 220VAC 400Hz For CNC Router

  • Changzhou,Jiangsu, China
  • Oct 31st
2X4X5/8 RADAR SE CEILING PANEL ?Sold By Case, Inside 8pcs)

2X4X5/8 RADAR SE CEILING PANEL ?Sold By Case, Inside 8pcs)

  • Continental, United States
  • Oct 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies