Great Workbook for pipe fitter / stream fitter / plumber in pipe construction This Worksheet makes your work simpler, more exact, more relaxed and faster. For the first time, complex mathematical contents are prepared simple and practical oriented for pipe fitter You will become a better pipe fitter whether 1 month or 20 years professional experience. You will become faster and more accurate with less work. The workbook is an assistance for each pipe fitter. Very easy to calculate from offsets with a finished elbow length and much more.. For the first time difficult calculable levels with complex formulas can be solved by an easy key sequence. Just push the right key sequence. It is always in your trouser pocket and the pipefitter has all important information for the practical work and the allocation of the materials always locally. (6,1 x 4,4 inch, 20 pages (10sheets) , practically indestructible for daily use on site) -------------------------------------------------------------------------------------------------------------------------------------------------------------- It contains the following data: Calculate of offsets and cut elbow: - 4 calculations with example for various offsets (inclusive drawing and key sequence for the calculator) - 2 calculations with example for the calculation of various offsets without cut length (inclusive drawing and key sequence for the calculator) - Calculation of exact cut to the elbow 90° (inclusive drawing and key sequence for the calculator) - Calculation for the difference in length of parallel offsets (inclusive drawing and key sequence for the calculator) - Table finished to calculated elbow (2.5° - 90° in 2.5° steps of 1/2 - 42 inch) - Constant for the offset calculation of 0.5° - 90° in 0.5° steps - Trigonometry table 0.5° - 90° (sin, tan, cos) Pipe data: - Nominal pipe size and outside diameter / 1/2 - 42 inch Fitting: - Length of elbow 2.5° - 90° 1/2 - 42 inch - Length if reducer 3/4 - 42 inch - Length of tee and reducer tee 1 - 42 inch (inclusive drawing) - Dimensions of flanges (150lb / 300lb / 600lb / 900lb) as overall length, number of bolts, large of bolts, diameter of bolts, Gaskets outside diameter (ring and full face) and minimal wall distance of flange pipe / 1/2 - 42 inch Other: - Pipe support 1/2 - 42 inch - Pipe volume 1/2 - 42 inch with UK gallon, US gallon and cubic feet (for pressure test or gas purging) - Pipe insulation 1/2 - 42 inch - Inch-DN equivalents 1/2 - 42 inch - Nozzle high (inclusive drawing) - Drawing to hot bending of little pipe - Material information of carbon steel A106-A to stainless steel A312-TP316 with processing, welding process, preheating and final heat treatment and welding consumables ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- ONE investment makes EVERY day a little more relaxed for YOU ! german quality more info: www.rohrvorrichter.de Shipping worldwide delivery from germany (3-14 days) My English is not perfect but pipe construction is international. Information of the seller Steffen Weber Am Fuchsbau 27 15344 Strausberg Deutschland Telefon: +49 3341 / 495835 E-Mail: rohrvorrichter@live.de CANCELLATION INFORMATION Is the customer a consumer, the following applies: Cancellation Rights You may cancel your contract within two weeks without giving any reasons. You can either cancel in writing (i.e. letter, fax, e-mail), or by sending back the product. The two week deadline starts at the earliest when receiving the goods with these instructions. For purposes of this deadline, it is sufficient to send the cancellation or the product postmarked within the deadline. The cancellation has to be addressed to: Steffen Weber Am Fuchsbau 27 15344 Strausberg Deutschland Tel +49 3341 495835 rohrvorrichter@live.de Cancellation Consequences In case of an effective cancellation, the likewise received benefits, including benefits, such as monetary interest have to be returned. In case you cannot return the product, or only in part, or the product was reduced in value, you may have to pay compensation. This is not the case, if the product was reduced in value, due to an inspection of the product, such as you could have done in a conventional retail store. In order to avoid such a requirement for compensation, do not use the product, and avoid all actions, that may reduce the value of the product. Please contact us before you send the product back. If the value of the product is less then 40 US$, the customer has to pay the cost of the return.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
