Worksaver Hpd-20hss 80klbs Force! Skid Steer Hydraulic Post Driver, Post Pounder

US $6,399.00

Moscow, Iowa, United States
Jan 30th

Open on mobile:
QR code

Brand New Worksaver Model HPD-20HSS, SKID STEER MOUNTED Post Driver with Hydraulic Adjustments. Expect This Post Driver & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too! GENERAL FEATURES: These Worksaver Post Drivers are Commercial Duty Machines and we Sell them at the Best Prices! We have Many Customers that have Driven Thousands of Posts and The Drivers are Still at Work! This is a High Impact Post Driver with up to 40 Strokes per minute! The 'Strokes per minute' is subject to the Tractors Hydraulic System. This HPD-20HSS with Hydraulic Tilt Adjustments (Front/Back, Left/Right) is a Very Affordable Post Driver and with 80,000lb's of Driving Force it's Great for Driving Posts into Tough, Hard, Rocky and/or Drier Soil Conditions! If you have Impossible Soil Conditions and Suspect that the 80,000lb's of Driving Force of this Driver won't be Enough - and that's Pretty tough Soil if that's the Case, then Consider the HPD-24 (Also on our eBay store) with 110,000lb's of Driving Force! However, keep in mind that the HPD-24 is Available Only with Hydraulic Tilt Adjustments which almost doubles the Cost of the Driver. You are welcome to call us for help in the selection of the most suitable driver for your soil conditions. This HPD-20 Post Driver is also Available with Manual Tilt Adjustments on our eBay Store. We have the Full Line Up of 3-Point & Skid Steer Mounted Worksaver Post Drivers on our eBay Store. Driver Ships Assembled (in Two Parts) & Complete Including: Skid Steer Hitch Assembly with Stabilizer Legs. Return Line Hose & Fitting Specific to Your Skid Steer. To Provide you with the Correct Return Line Kit, You Must Provide us With the Make & Model of Your Skid Steer! Hydraulic Hose & Coupler. Spring Loaded Post Holder/Safety Arm. SPECIFICATIONS: Minimum Hydraulic Requirement is 6-8 GPM. Maximum Post Diameter is 8-3/4". Will Drive Anything That Fits in This Dimension - Wood Posts, Steet Pipe, Rail Road Ties, etc.! Maximum Post Length is 10'. Impact at Full Stroke is 80,000lbs. Impact at Half Stroke is 40,000lbs. Tilt Adjustment (Front/Back) is 17 Degrees either way. Tilt Adjustment (Left/Right) is 20 Degrees either way. Weight is 693lbs. Plus We're Glad to Say This Post Driver is MADE IN THE USA! Provide Us With Your Zip Code For A Quote Of Our Affordable Nationwide Shipping Prices! TYPICALLY IN STOCK BUT YOU'RE WELCOME TO CALL FOR AVAILBILITY! Farm Equipment 24-7 eBay Store of Iowa Farm Equipment A FULL SERVICE DEALERSHIP Providing Parts & Warranty Service Nationwide! 563-946-2122

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Worksaver HPD20HSS. HPD20-HSS, HPD-20HSS
MPN	Worksaver HPD20HSS. HPD20-HSS, HPD-20HSS
Model	Worksaver HPD20HSS. HPD20-HSS, HPD-20HSS
Country of Manufacture	United States