x 3/4 ton for sale, brand-new and used.

Enerpac GBJ002 GBJ Series Industrial Bottle Jack, 2 Ton Capacity, 6.3 To 12.2 Height Description Hydraulic Cylinders, Jacks, Lifting Products and Systems Enerpac provides the largest selection of cylinders and lifting systems, fully supported and available through the most extensive network of distributors worldwide. We have a solution for virtually any application – lifting, pushing, pulling, bending or holding – in

Ruud/ Rheem Model RKNB-A102CL15E 8.5 ton cooling 150,000 BTU two stage gas heating package unit R22 gas 11.3 EER. Belt drive/ variable two stage heat 75,000 btu/ 150,000 btu input. Three phase 200-230 volt.

Good condition panavise 1/4 ton arbor press. Mechanically sound with scratches. 7" high x 3 3/4" wide x  7" deep. 

Product Name 2 Jaw Adjustable 16" 17-1/2 Ton Mechanical Grip-O-Matic Puller Features and Benefits: This 2 jaw puller has a 17-1/2 ton capacity Maximum reach: 18-3/4"; Maximum spread: 16" Screw size: 1"-14 x 13-1/2" Jaw thickness: 13/16" Jaw width: 1-9/32" OTC has developed a complete line of gear and bearing pullers, enabling you to remove and install parts for fast effective repairs.

Product Name 2 Jaw, Adjustable 13 Ton Mechanical Grip-O-Matic Puller Features and Benefits: This 2 jaw puller has a 13 ton capacity Maximum reach: 15-1/4"; Maximum spread: 15-1/2" Screw size: 13/16" 16 thread x 12" These pullers are forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. This complete line of gear and bearing pullers, enables you to remove and install parts for fast, effective repairs.

Product Name 3 Jaw, 1 Ton Mechanical Grip-0-Matic Puller Features and Benefits: This 3 jaw puller has a 1 ton capacity Maximum reach of 2-1/8" and the maximum spread of 3-1/4" Screw size 5/16" - 24 x 3-7/8" Jaw thickness 9/64" Jaw width 1/4" These pullers are forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. These pullers enable you to remove and install parts for fast, effective repairs.

Product Name 2/3 Jaw, 7 Ton Mechanical Grip-O-Matic Puller Features and Benefits: This 2/3 jaw puller has a 7 ton capacity Features long jaws Maximum reach: 8-3/4"; Maximum spread: 11" Screw size: 11/16" - 18 x 9" Jaw thickness: 11/32"; Jaw width: 1" This complete line of gear and bearing pullers, enables you to remove and install parts for fast, effective repairs.

Product Name 2 Jaw, 5 Ton Mechanical Grip-0-Matic Puller Features and Benefits: This 2 jaw puller has a 5 ton capacity Features reversible jaws Maximum reach: 5-1/2", Maximum spread: 6" Screw size 9/16" - 20 x 6-15/16" Jaw thickness: upper - 5/16" and lower - 1/4"; Jaw width: upper - 3/8" and lower - 3/4" This complete line of gear and bearing pullers, enables you to remove and install parts for fast, effective repairs.

Hello and welcome! Up for sale is a Crosby Hoist hook with the Bullard Rollox Golden Gate closure, self closing (spring loaded) gate closure. The closure latch is broke off (see 8th photo) and needs a rebuild kit , if desired, but still work fine.

Product Name 2 Jaw, 7 Ton Mechanical Grip-O-Matic Puller Features and Benefits: This long 2 jaw puller has a 7 ton capacity Features reversible jaws Maximum reach of 8-3/4", maximum spread: 9-1/2" Screw size: 11/16" - 18 x 9" Jaw thickness: 11/32"; Jaw width: 1" This complete line of gear and bearing pullers, enables you to remove and install parts for fast, effective repairs.

Product Name 2 Jaw, 2 Ton Mechanical Grip-0-Matic Puller Features and Benefits: This 2 jaw puller features a 2 ton pulling capacity Features reversible jaws Screw size 3/8" - 24 x 4-7/8" Maximum reach of 3-1/4" and with a maximum spread of 4" The jaw thickness: upper 3/16" lower 1/8"; and the jaw width: upper 1/4" and lower 1/2" These pullers are forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity.

Product Name 2/3 Jaw, 5 Ton Mechanical Grip-0-Matic Puller Features and Benefits: This 2/3 jaw puller has a 5 ton capacity Features reversible jaws Maximum reach: 3-1/4"; Maximum spread: 7" Screw size: 9/16"-20 x 6-15/16" Jaw thickness: upper - 5/16", lower - 1/4"; jaw width: upper - 3/8", lower - 3/4" OTC has developed the most complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs.

Document Document Document .nav{margin:0;padding:0; list-style:none;float:left;} .nav li{height:62px;line-height:60px;background:url('http://www.amonstar.com/photo/Template/00.png') right top no-repeat;float:left;font-size:18p

SHEARS FOR FLAT BAR FLAT BAR (MINIMAL DEFORMATION): 24” X 5/8”, 16” X 3/4”, 12” X 1” LENGTH OF BLADE: 24” WORKING HEIGHT: 37-13/16” SHEARS FOR PROFILES SHEARING POWER: 180 TON L @ 90 DEGREE (SHEAR WITHOUT DEFORMATION): 6” X 6” X 1/2” L @ 45 DEGREE: 3” X 3” X 5/16” SHEARS FOR SOLID BARS R

This listing is for one NEW Thermal Zone 4 ton packaged heat pump air conditioning unit. Our HVAC technician has inspected this unit and pronounced it to be in good operating condition and ready to run. Electric heat can be easily added to this unit.

This listing is for one NEW Thermal Zone 4 ton packaged rooftop air conditioning unit with gas heat. Our HVAC technician has inspected this unit and pronounced it to be in good operating condition and ready to run. This is a “Scratch & Dent” unit in that there may be some minor scratches and dents on the cabinet.

Please contact us for additional information through ebay mail, or directly at: nrscientific@gmail.com / (201) 592-1864. Carver Bench Top Press - Model C 12 Ton Carver Model 3851 With Protective Safety Shield Full Specs Below Available for delivery after August 10th Industry Workhorse Lab Press Full 6 Month Parts/Labor Warranty.