Xl - Lakeland Tychem Encapsulated Chemical/hazmat Suit Tk640 Ebola Vapor Safe

US $945.00

  • Show Low, Arizona, United States
  • Jan 30th
Note: I have three Tychem Suits For Sale. THIS listing is for the XL (last one), although a LARGE is PICTURED. ALL Suits are the Same Make/Model. If interested in the two large suits, please see my other listings. It is the buyer's responsibility to research how the suit works and if it will fulfill their purpose. SIZE - XL  COLOR - LIME GREEN DuPont High-Visibility Tychem TK Fully Encapsulated Professional Chemical Protection Suit, Level A: Standard three-layer faceshield (PVC 40 mil / Teflon 5 mil / PVC 20 mil), attached internal Barrier gloves, attached outer butyl gloves, expanded back (accommodates SCBA), rear entry, gas-tight zipper closure, double storm flap over zipper, attached boots, outer boot flaps, knee wear pads, one exhaust valve, internal adjustment belt. Suit conveys in it's Original DuPont Nylon/Zippered Carrying Case, otherwise no other accessories convey. Specifications: Level A Tychem Chemical / HAZMAT Professional Suit: 1. Suit fabric to be laminated film - Level A 2. Suit Design - Expanded back to accommodate wearing of self contained breathing apparatus(not included) inside suit. 3. All seams stitched with 50/2 Permaspun thread and sealed with specialized seam tape inside and out. 4. Zipper closures is a 48" PVC OEB design zipper with a vapor-proof closure by a 4" wide flap of suit material, and held in place by 5/8" full length velcro. Front Entry: left side of hood and across back. Rear entry:center back. 5. Visor/Lens Material - is a 40mil PVC lens and a 10mil FEP Teflon lens sandwiched together using a specialized seam tape and process. The Visor/Lens is designed to ensure maximum visibility. 6. Head area is designed large enough to accommodate a SCBA face piece(not included) and to be able to allow user to wear a hard cap or firemen's helmet. 7. The optional pass-thru(not included) is to be located in the right area to allow for hoojk-up outside air for breathing and cooling. 8. Three exhaust valves designed to maintain a positive pressure in the suit when a breathing apparatus is in use are located as follows: 1 on the right side of the back of the hood, 1-on the right side of the expanded back and 1-on the left side of the expanded back. 9. Gloves on NFPA 1991 certified ensembles are to be three separate components from inside out: 10mil Viton Glove, North SilverShield, KEVLAR-or One Glove System 10.The Suit has attached sock boots with a splash guard to fit over undustrial NFPA approved boots. Both sock boots and splash guards are constructed of Level A Materials. 11. Color of suit is LIME GREEN 12. Spacious Sleeve Design allows wearer to have access to SCBA controls(not included) by pulling arm from sleeve while still in suit. The suit is designed to allow room for 2-way radio communication systems. 13. Size Chart for XL is 5'6" up to 6'2", 150-230lbs (approx) 14. Suit to pass a minimum 180 minutes in NFPA 1991 Battery of Challenge Chemicals, See NFPA Testing Results 15. Suit must pass the ASTM F1052 pressure test. 16. Labeling in the suit contains the following warning Statement, Model Number, Serial Number, Date of manufacture, Pressure Test Results, and accompanying over boot style and marked if certified to optional chapter of the Standard. DuPont Tychem – Protecting Industrial Workers for 30 Years - Suit comes in original Not all deadly threats come in the form of guns or other weapons. For protection against chemical dangers, industrial workers rely on DuPont™ Tychem® garments. Every day, thousands of industrial workers put their trust in our garments, so as a normal business practice, at DuPont we make sure that Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas. In fact, as a company, we helped improve the safety standards for the HAZMAT category. Your workers can feel confident that wearing Tychem® checmical suits can help them do their job at hand. Caution: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tychem fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.
Condition:
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...
Brand Lakeland
Model tk640

Directions

Similar products from Hazmat Suits & Coveralls

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies