XL-SB XLERATOR Hand Dryer Stainless Steel 120V New Unused very minor scratches, US $540.00 – Picture 0

XL-SB XLERATOR Hand Dryer Stainless Steel 120V New Unused very minor scratches, US $540.00 – Picture 1

XL-SB XLERATOR Hand Dryer Stainless Steel 120V New Unused very minor scratches, US $540.00 – Picture 2

Xl-sb Xlerator Hand Dryer Stainless Steel 120v New Unused Very Minor Scratches

US $540.00

Livonia, Michigan, United States
Feb 14th

Open on mobile:
QR code

To Pay by Credit Card, call 888-50-DRYER, Or Checkout through Ebay using PayPal Here is what is 100% Absolutely FREE with this purchase: FREE Installed 1.1 Quiet Nozzle to REDUCE Noise by 10 decibles from Original Xlerators FREE Same Day Shipping. Lightening Fast Delivery! Lower 48 States Only. This listing is for the following hand dryer: Excel Dryer XLERATOR Hand Dryer XL-SB, 110-120 Volt, Stainless Steel Cover, Automatic Sensor, Surface Mounted, LEED Credits, GreenSpec Listed, Commercial Hand Dryer FEATURES Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC? Approved and Helps Qualify for LEED? credits. Source Reduction Alternative Promotes Hygiene SPECIFICATIONS Dimensions: 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135?F (57C) at a 72F (22C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed. Limited Warranty The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

“This dryer is new unused but has extremely minor scratches and is missing owners manual.”

Brand	Excel Dryer
MPN	XL-SB
Model	XL-SB