+ Post new Ad
XL Timing Pulley 20/20 Teeth & belt Reducer Set Ratio 1:1 CNC KIT Router Lathe, US $240 – Picture 0
XL Timing Pulley 20/20 Teeth & belt Reducer Set Ratio 1:1 CNC KIT Router Lathe, US $240 – Picture 0

Xl Timing Pulley 20/20 Teeth & Belt Reducer Set Ratio 1:1 Cnc Kit Router Lathe

US $240

  • Torornto, ON, Canada
  • Jan 29th
Open on mobile:
QR code
Please read carefully before you bid/buy Auction for: 2 Items Pulley 20 Teeth bore diameter 1/4"  Timing Belt 396.24mm/15.6" length, 15 mm width Reducing Ratio 1:1 used for same ratio transmission Other belt length are available or for any custom belt length please contact us  For full specification please visit http://www.motiontek.ca/pulley.html To decide an approximate belt length by checking the center distance on our web calculator on http://motiontek.ca/PulleyBeltCalc.html Can be used with Stepper motors, DC motors, Servo motors Material Aluminum Clear Anodized  All Pulleys come with two set screw hole (S) Set Screw not included All measurement are in metric mm, each inch = 25.4 mm Please check other ebay auction for other available ratio  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Firmware Timing Pulley belt Reducer CNC Router Plasma Lase
Circuit Type Timing Pulley belt Reducer CNC Router Plasma Lase

Directions

Similar products from Linear Actuators & Bracket Stroke

Newport, Long Travel Steel Linear Stage, 100 mm, Microstep, 1.0 µm, M6, MTM100P1

Newport, Long Travel Steel Linear Stage, 100 mm, Microstep, 1.0 µm, M6, MTM100P1

  • Saint Paul, Minnesota, United States
  • Jan 29th
Zaber Technology Motorized Linear Slide, 450 mm travel, T-LSR450B, S/N 16829

Zaber Technology Motorized Linear Slide, 450 mm travel, T-LSR450B, S/N 16829

  • Saint Paul, Minnesota, United States
  • Jan 29th
Newport ILS150CC Precision Motorized High Performance Linear Stage 150mm Travel

Newport ILS150CC Precision Motorized High Performance Linear Stage 150mm Travel

  • Saint Paul, Minnesota, United States
  • Jan 29th
Newport Long Travel Steel Linear Stage, 100mm, Microstep, 1.0 µm, M6, M-MTM100P1

Newport Long Travel Steel Linear Stage, 100mm, Microstep, 1.0 µm, M6, M-MTM100P1

  • Saint Paul, Minnesota, United States
  • Jan 29th
Full 13pcs(13 size ) ER11 PRECISION SPRING COLLET For CNC milling lathe tool

Full 13pcs(13 size ) ER11 PRECISION SPRING COLLET For CNC milling lathe tool

  • ??, ???, China
  • Jan 29th
Thomson Linear Actuator D24-21B5-14

Thomson Linear Actuator D24-21B5-14

  • Lawrence, Massachusetts, United States
  • Jan 29th
THK SC30UU LM CASE UNIT BEARING NEW IN BOX

THK SC30UU LM CASE UNIT BEARING NEW IN BOX

  • Bellville, Ohio, United States
  • Jan 29th
Newport BGM120PE Goniometer, ±45° Travel Range, Full-step drive

Newport BGM120PE Goniometer, ±45° Travel Range, Full-step drive

  • United States
  • Jan 29th
Linear Guide Rail 59" x 2 Block Bearings x 4 CNC Router Mill Plasma Laser KIT

Linear Guide Rail 59" x 2 Block Bearings x 4 CNC Router Mill Plasma Laser KIT

  • East York, Ontario, Canada
  • Jan 29th
XL Timing Pulley 40 20 Teeth belt 16" Reducer Ratio 2:1 CNC KIT Router Mill

XL Timing Pulley 40 20 Teeth belt 16" Reducer Ratio 2:1 CNC KIT Router Mill

  • Torornto, ON, Canada
  • Jan 29th
Rack 500mm/19.68" Pinion 26T CNC KIT Machine Router Plasma Laser Lathe Mill

Rack 500mm/19.68" Pinion 26T CNC KIT Machine Router Plasma Laser Lathe Mill

  • East York, Ontario, Canada
  • Jan 29th
Linear Rail Guideway 15" & 2 Bearings Block CNC KIT Router Mill Plasma Lathe

Linear Rail Guideway 15" & 2 Bearings Block CNC KIT Router Mill Plasma Lathe

  • East York, Ontario, Canada
  • Jan 29th
Rack Module 2.0 1500mm/59" and 22T Gear Pinion CNC Router Plasma Laser MILL

Rack Module 2.0 1500mm/59" and 22T Gear Pinion CNC Router Plasma Laser MILL

  • East York, Ontario, Canada
  • Jan 29th
THK Model: RSR7W Linear Table on Approximately 2 3/4" Rail. <

THK Model: RSR7W Linear Table on Approximately 2 3/4" Rail. <

  • Phoenix, Arizona, United States
  • Jan 29th
Schneeberger Monorail system BM20 BMD20-G3-V1 for maintenance New block cartridg

Schneeberger Monorail system BM20 BMD20-G3-V1 for maintenance New block cartridg

  • Gainesville, Florida, United States
  • Jan 29th
Thomson Saginaw Ball Screw 07820955

Thomson Saginaw Ball Screw 07820955

  • San Angelo, Texas, United States
  • Jan 29th
Newport M-GM-1R - Precision Tip / Tilt Rotation Mount Stage, 1 in. Diameter

Newport M-GM-1R - Precision Tip / Tilt Rotation Mount Stage, 1 in. Diameter

  • Modi'in, Israel
  • Jan 29th
PARKER PROmech LP28 LINEAR ACTUATOR POSITIONER CNC ROBOT PLASMA ENGRAVING

PARKER PROmech LP28 LINEAR ACTUATOR POSITIONER CNC ROBOT PLASMA ENGRAVING

  • Manchester, New Hampshire, United States
  • Jan 29th
2 NEW Nippon IKO LWL-15-C2-R787-E551 Linear Guide Rails w/ Slide Bearings SS

2 NEW Nippon IKO LWL-15-C2-R787-E551 Linear Guide Rails w/ Slide Bearings SS

  • Leander, Texas, United States
  • Jan 29th
(2) NSK LS15 Linear Ball Slide Bearing W/(1) NSK LS15Z Linear Guide Rail 25-5/8&#034;

(2) NSK LS15 Linear Ball Slide Bearing W/(1) NSK LS15Z Linear Guide Rail 25-5/8"

  • Leander, Texas, United States
  • Jan 29th

People who viewed this item also vieved

Robohand Destaco Metric Parallel Gripper Spring Return DPG-10-1-O-T MINT

Robohand Destaco Metric Parallel Gripper Spring Return DPG-10-1-O-T MINT

  • Kitchener, Ontario, Canada
  • Jun 5th
SMC MSQB10A Rotary Air Table Rack and Pinion Bore 180° Stroke / D-F9N Autoswitch

SMC MSQB10A Rotary Air Table Rack and Pinion Bore 180° Stroke / D-F9N Autoswitch

  • Laporte, Colorado, United States
  • Jun 5th
SMC Parallel Gripper 16mm Bore x 12mm Stroke MHZL2-16D MINT

SMC Parallel Gripper 16mm Bore x 12mm Stroke MHZL2-16D MINT

  • Kitchener, Ontario, Canada
  • Jun 5th
Schunk Parallel Gripper Pneumatic 2-Finger Spring assist PGN +50-1AS 371399

Schunk Parallel Gripper Pneumatic 2-Finger Spring assist PGN +50-1AS 371399

  • Hanover, Minnesota, United States
  • Jun 6th
1x SMC MXH16-40 cyl, compact slide table, MXH HIGH RIGIDITY GUIDE #0015

1x SMC MXH16-40 cyl, compact slide table, MXH HIGH RIGIDITY GUIDE #0015

  • vila nova de famalicao, braga, Portugal
  • Jun 6th
Allen Bradley MPL-B430P-SJ22AA Servo Motor w/ 27-119339-F804 Gearbox

Allen Bradley MPL-B430P-SJ22AA Servo Motor w/ 27-119339-F804 Gearbox

  • Francis Creek, Wisconsin, United States
  • Jun 9th
FANUC A06B-0116-B403 ssiS 1/6000 AC SERVO MOTOR

FANUC A06B-0116-B403 ssiS 1/6000 AC SERVO MOTOR

  • Aurora, Indiana, United States
  • Jun 9th
UNIMAT SL / DB Lathe 0 7 tpi THREAD CUTTING FORMER &amp; GUIDE 1271

UNIMAT SL / DB Lathe 0 7 tpi THREAD CUTTING FORMER & GUIDE 1271

  • Bridgeville, Pennsylvania, United States
  • Jun 9th
used omron ac servo motor r88m-u20030la-s1 200w tested #7286437

used omron ac servo motor r88m-u20030la-s1 200w tested #7286437

  • Shanghai, China
  • Jun 9th
NEW VEXTA BRUSHLESS MOTOR BL430GD-AF BL430GDAF

NEW VEXTA BRUSHLESS MOTOR BL430GD-AF BL430GDAF

  • Clover, South Carolina, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies