Yaskawa Legend Mc Sgdg-04gt Amp + Smc3010 Controller

US $299.99

  • Fishers, Indiana, United States
  • Feb 24th
 You are bidding on a Yaskawa servo amplifier # SGDG-04GT along with the add on programmable motion controller SMC3010.  The SGDG-04GT can drive motors of 100~750W rated output. Basic Specifications Input Power Supply Main Circuit1 Single-phase: AC90 ~ 253VAC Three-phase: AC170 ~ 253VAC Optional DC bus input: 127VDC (minimum) to 357VDC (maximum) Control Circuit Single-phase AC 90 ~ 253VAC Control Mode Three-phase, full-wave rectification IGBT PWM (sinusoidal commutation) Feedback Serial incremental encoder Location Ambient2/Storage Temperature 0 to 55?C / -20 to 85?C Ambient/Storage Humidity 90% or less (non-condensing) Vibration/Shock Resistance 4.9m/s2/9.8m/s2 Structure Base mounted (duct ventilation available as option) and flat mount type Torque Control Mode Input Signal Torque Reference Reference Voltage 0 to ±10V at peak torque (forward rotation with positive reference). Resolution: 16-bit analog to digital conversion. Input Impedance Approximately 14kW Circuit Time Constant Approximately 47µs I/O Signals Position Output Encoder Output Form Phases A, B and C: Line driver output Encoder Output Choices: set with rotary switch: Binary: 512, 1024, 2098,...32768 Decimal: 1000, 2500, 5000, 6000, 10,000, 20,000, or 25,000 Sequence Input Servo ON, Dynamic Brake OFF3 w/choice of Photocoupler input 12V-24dc (primary) or 5 VDC TTL inputs (effective logic is “High”) Monitors Torque Monitor 5V/Maximum torque or force Speed Monitor 1V/1000rpm or 1000 mm/sec Sequence Output Servo run, alarm (Photocoupler output: 12V-24VDC) Built-in Functions Regenerative Processing Incorporated Protection Overcurrent, overload, regenerative error, main circuit voltage error, heat sink overheat, power open phase, overflow, overspeed, encoder error, encoder disconnected, overrun, CPU error, switch setting error, linear motor scale polarity error LED and Alarm Output Display POWER, CHARGE, one 7-segment LED display Others Automatic servomotor ID
Amplifier and Controller are in great shape. They were used in some bench top testing so there is not very much wear on them.
Brand Yaskawa Electric

Directions

Similar products from Servo Drives, Servo Packs & Operator's Panels

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies