US $28.39
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Material | High carbon steel |
Chuck size | about 50*40mm | ||
Color | Silver | ||
Brand | Unbranded | ||
Connecting rod size (LxD) | about 5.2cm x 6mm | ||
MPN | Does Not Apply | ||
Connection thread | M12*1mm | ||
UPC | Does Not Apply | ||
EAN | Does Not Apply |
Directions
Similar products from Other Workholding Tools
Z011 Metal 3 Jaws Manual Lathe Chuck Clamp Self-Centering Mini Drill Chuck
Peachtree Woodworking Supply Pen Blank Centering Vise for Drilling Center Hol...
Wilton H403CS Spark-Duty Hi-Vis C-Clamp, 3" Jaw, 2-3/8" Throat (20481)
Wilton Model 56 Super-Junior C-Clamp, 2-1/2" Opening Capacity (21307)
1ISO30 tool holder clamp + ISO30 tool holder claw CNC Tool Change Forks for AuJ4
OSBORNE WOOD PRODUCTS, INC. 893240PG 7/16 x 39 3/8 Orpheus Inlay Strip in
OSBORNE WOOD PRODUCTS, INC. 1455H 34 1/2 x 4 Grand Island Post in Hickory
OSBORNE WOOD PRODUCTS, INC. 1494W 34 1/2 x 6 The Islander in Black Walnut
OSBORNE WOOD PRODUCTS, INC. 1450A 34 1/2 x 3 1/2 Islander Island Post in Alder
OSBORNE WOOD PRODUCTS, INC. 1452HM 34 1/2 x 5 Massive Islander Post in Hard
Mitee-Bite 60750 Uniforce Clamps 6-pack 6 Total Clamps
Schaublin ww20 Swiss Made Collet Aciera Mill 102 Lathe 20 mm METRIC FRACTIONAL
8-1/2" Faceplate 1-1/2 x 8TPI and 3 Dogs Craftsman Lathe Atlas Armstrong Logan
WARNER & SWASEY #5 COLLET PADS ROUND 9/16"
WARNER & SWASEY #5 COLLET PADS ROUND 19/32"
WARNER & SWASEY #5 COLLET PADS ROUND 2-1/32"
ER25UM Collet Chuck Nut Clamping Tools For CNC Milling Engraving Machine
3 Jaw Lathe Chuck Manual Chuck 3"Lathe Drilling Part 80mm Total 2 Set of Jaws
Lathe Chuck 4 Jaws Zinc Alloy Self Centering Clamp Clamping Hex Key Parts
1*-square ER32/25/40 Chuck Block Hard Steel Spring Chuck Seat For CNC Lathe
People who viewed this item also vieved
Brown & Sharpe #750 Precision Vee Block
Lot of machinist tools, Tool & Die, toolmaker tools, vices, files, lathe, blocks
Machinists 11/26A BUY NOW USA SOLID 5C Collet Center 60 degree
6 Inch (6") 4 Jaw Independent Lathe Chuck in Premier Quality
4 Inch (4") 4 Jaw Independent Lathe Chuck
Buck 12" 3 Jaw Self Centering Lathe Chuck with Revesible Jaws
Kitagawa B-212 12" Power Lathe Chuck
13mm 1/2" Drill Chuck 2MT for Myford ML7 ML7R Metal Lathe & Super 7
Lot Of 5 Chucks: 4 Jacobs & 1 Wilton
Lot of 69 Assorted Taps: U.S. Standard
LOT 4 Good Hand Capacity Push Pull Clamp GH-36204-SS
Royal bar puller for c.n.c. lathe
Hardinge HV-4, 5C Collet Indexing Fixture WITH HARDINGE TAIL STOCK
SCULLY JONES MILLING CHUCK AND COLLET CASE
29/32" Warner & Swasey #5-1A Collet, 471-1002 Nardco
Royal Products Quick Change Collets
Adjustable Tilt Steel Welding Flameproof Table Cutting Grinding MIG TIG Plasma
6" SINE BAR / PLATE, 6-1/8" x 2-3/16" x 15/16"
MOUNTABLE FACE PLATE 12 1/4" OD
PALMGREN 8 Inch Tilting Rotary Index Table, Rare, 1 Axis Cross-Slide, Excellent!
Troyke DMT-15 ROTARY CROSS SLIDING TABLE fits Bridgeport Milling Machine
J.H. Williams ~ Genuine Vulcan No. 3 ~ Pipe Vise ~ 1/2" to 6" Inches ~ USA ~Tool
Wilton 25A Tilting Angle Drill Press Vise
Vintage Yankee Vise No. 992 and 1992 base North Bros MFG Co Small Metalworking
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies