• This is little solid brass fire hose wye valve • Input side is a swivel 1-inch NH/NST thread • Works with a pin style spanner for small fittings (does not have lugs or rockers - see photos) • Output is to two 1" male NH/NST thread discharges. • This is used when you want to divide one hose line into two. • This unit is old but in good condition (the swivel connection moves freely) • Weight is 2.5 lbs.
(13) 2-1/2" x 50 foot Made in USA Service test to 300 psi Pressure proof tested to 600 psi (13) 2-1/2 inch x 50 foot: .... (6) Snap-Tite 2-1/2" x 50' Dura Light, rubber fire hose .... Color: yellow.
2-1/2" X 50 FT Double Jacket Contractors Hose, 400 PSI Test (200 PSI Service rated) with aluminum NPSH thread fittings. These are not fire thread interchangeable. This hose is new overstock, it is in original packaging, about 3-4 years old.
for sale fire hose reducing 30 degree elbow adapter that allows 4" or 100mm storz to connect to female 4.5" NH National Standard Fire Hose Thread. The inside diameter of the storz waterway is 3.5" Free Priority mail and same day handling. Express mail available.
for sale fire hose reducing adapter that allows 4" or 100mm storz to connect to male 4.5" NH National Standard Fire Hose Thread. The inside diameter of the storz is 3.5" Free Priority mail and same day handling. Express mail available.
Up for bid is a brand new 1-1/2"Inch x 50'ft single jacket lightweight polyester compact hose and fire nozzle. This fire hose is for fire protection, construction and for all of your watering/ dewatering needs. This 1-1/2" hose has a working pressure of 250 psi and is tested for a rating of 500 psi.
The “Powhatan” Model 18-157-50000, Angle Hose Valves are designed for use in piping systems where it is necessary to access the system for a fire hose connection. Typical applications are in fire department connections, gravity and pressure tank connections, and public water supplies to sprinkler and standpipe systems. 2 1/2 " (63.5 mm) Valve.
1 1/2 " Angle Fire Hose Valve Female NPT x Male NST Used as fire hose outlet connections Cast brass, 300 Psi/2070KPA UL, ULc listed and FM Approved Model A97H 1 1/2 " Female NPT inlet x 1 1/2 " Male NST thread outlet
Apache Double Wall Fire Hose Apache Double Wall Fire Hose is a flexible, abrasion-resistant fire hose, strong enough to be used in industrial wash down and fire protection applications. It is made with high tensile, 100% polyester yarn completely woven with complete filler yarn in both jackets. U.S.A.
for sale pistol grip TFT Quadra Fog fire hose nozzle with 1.5" NH NST NS National Standard Fire Hose Thread inlet and shutoff. Task Force Tips Model # FQS125. Didn't leak at 80 psi and made a perfectly straight stream like a pipe.
Industrial FIRE HOSE SHUT OFF CLAMP made by KCR MFG Portland Number "2" is found stamped 3x on the tool, also "1.93 FSS" Capable of shutting off water flow in a large fire hose
Fire Hose Rack In great condition- preowned 1 1/2" hose Functioning pins for holding hose Made by The General Detroit Corporation - Model U Semi Automatic Hose Rack Dimensions: 19" long x 4 1/8" wide x 1.5" high Provides an immediate water source for fire control and suppression Permits one-person operation Rack was for 1.5" NH x 50 ft. hose. Nozzle clip was for a 10" brass nozzle.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.