1 1 4 threaded rod for sale, brand-new and used.

UP TO 6 NEW BIMBA 1" STAINLESS AIR CYLINDERS 041-DB W/BUMPERS This is an Auction for up to 6 Brand New Pneumatic Bimba Front Nose Mounting Double Acting Air Cylinders with Bumpers, Model # 041-DB with 1 inch of stroke and a 1/4"(.250) piston threaded on the end. Each bid is for ONE Cylinder. Cylinder measures .8" Diameter and has 3/4" Bore.

UP TO 3 NEW BIMBA 3/4" STAINLESS SPRING RETURN AIR CYLINDERS M-040.75 This is an Auction for up to 3 Brand New Pneumatic Bimba Front Nose Mounting Single Acting Spring return Air Cylinders, Model #M-040.75 with 3/4 inch of stroke and a Stainless .250" piston threaded on the end. Each Bid is for ONE Cylinder. Cylinder measures .81" Diameter and has 3/4 Bore.

Craftsman 58 PC UNIVERSAL MAX AXESS MECHANICS TOOL SET

LIN - ACT AIR/HYDRAULIC CYLINDER 3/4 X 2 NEW OLD STOCK 3/4 BORE X 2" STROKE CYLINDER 1/8" NPTE PORTS, THREADED ROD END

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

FOR SALE: ONE SET OF TWO ALUMINUM 6061 MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.75" LONG, .750" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

FOR SALE: ONE SET OF TWO SOLID BRASS MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.875" LONG, .875" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

RBF Products Adjustable 5C Collet Stop * Up for sale is (1) RBF Products Adjustable 5C Collet Stop. * Condition = New * Made

RBF Products Adjustable 16C Collet Stop

RARE SELF-CENTERING VISE/VICE TOOL (Type Mechanism in Hermes Vises / Engraving Vises / Scissor Lifts) SCISSORS LIFT MECHANISM PARTS, DIY New old stock (NOS), minor surface discoloration due to storage. Rare Solid Steel Self-Centering Vise Tool Mechanism Parts Set. This is the same general type of self-centering mechanisms found in the superior Hermes Vises, other Engraving Vises, and small Scissors Lift Platforms.

This auction is for 1 Standard 6" Billet aluminum Machined vise stop. (DIMENSIONS FOR FITMENT) This vise is designed to mount onto the back of a 6" standard vise. This means brands like KURT, GLACERN, and any other standard 6" vise with 3.875" spacing from center to center of holes, and uses a 1/2-13 thread.

PlasmaHelper Plasma Torch Standoff. Keeps your tip off cutting surface, provides stability and a good edge to place against a guide. Threaded 1/4" x 20 so you can make your own attachments if you need.

May be used as a spindle-adapter for a wood lathe from LatheCity Included: Morse Taper #2 (MT2) to 1"-8 TPI (x1.5" thread length), steel, 1/4-20 drawbar, RH threads + nut and washer

May be used as a spindle-adapter for a wood lathe from LatheCity Morse Taper #3 two in one

Titlle and photo say the most.Do not know what alloy stainless.Non-magnetic. Blue paint so better than 304. 15-1/4" w/chamferred end.

New billet aluminum replacement rear clamp block for your Delta Unisaw fence This is a replacement clamp block for the rear of the early style Unisaw fence. The early style fence is shown in photo #2. This fence is identified by the presence of the small rear clamp tighening knob above the lever lock at the operator side