1 1/2 shaft for sale, brand-new and used.

(one) food grade paddle mixer, 60" x 24" x 28" deep inside, 3hp 230/460vac 1750 rpm motor, 57-1 ration gear reducer, approx 4-1 speed reduction thru chain and sprocket. Approx final speed is about 7 rpm. Allen bradley motor starter ( not pictured ) with power cord and plug.

3 HP Eastern Clamp Type Mixer 60" Stainless Steel Shaft And 10 Double Prop. - P & K Equipment, Inc. phone: 216-831-8858 fax: 216-831-7779 Item #8443 3 HP Eastern Clamp Type Mixer 68 1/2" Stainless Steel Shaft And 10 Double Prop.

We have a New Sumitomo Paramax 9000 right angle gearbox MODEL PHA9050R3Y-RLF-22.4 75HP input @ 1800 RPM Gear Ratio 22.530 Input Shaft is 1 1/2" in diameter Output shaft is 4 1/8" in diameter Manufactured June 2008 Overall Dimensions 41" L x 13.5" W x 17" H **THIS ITEM IS LOCATED IN Darlington, South Carolina** Thanks for Looking and Good Luck! Email me with any questions

Steel 17-1/2" Shaft Concrete Mixing Blade Inventory #1144 DESCRIPTION The steel mixing blade is in rough condition. It was cleaned with a dremel tool and most of the concrete was removed. The screws that hold the blades could not be cleaned.

SPX Industrial Mixer, S -Series. # MS1L6. Stainless Steel, Model # MS1L6.

FALK 4723298 SHIM GASKET KIT SEAL RING KIT FOR HMX HMH MIXER SHAFT 2.00/2.25" - NEW Click Image To View Full Size

USED HOCKMEYER DUAL SHAFT LAB MIXER, MODEL 9HHL LAB/STD. 2 GALLON JACKETED MIXING VESSEL. (4) BEKA BA307C DIGITAL CONTROLLERS: NESLAB REFRIGERATED RECIRULATOR, MODEL CFT-25; (2) ABB ACS 600 AC DRIVES.

Shaft sleeve support 6 11/32 in ID 90235 1008 PTEM Philadelphia Mixers Unused This is an unused shaft sleeve made by Philadelphia Mixers, part number 90235-1008. This has some factory preservative which can be seen in the pictures below. Bore: 6 11/32 inches OD of larger tapered side: 7 25/32 inches OD of other side: 7 3/32 inches Height/length through bore: 4 1/2 inches Specifications: MFG: Philadelphia Mixers Model: 90235 1008 Serial: Volts:&nbs

Coated 1" Mixer Shaft + Impeller Assy 14.5" OD 68" Long

Used 1 HP Lightnin Air Driven mixer/agitator. Motor is XP, 1 HP, 230/460 v, 1760 RPM. Flange mount type.

var itemNumber = window.ebayItemID ?

You are bidding on a 2-3/4" TG&P 316 Stainless Steel Shaft 2-5/8 inches long With 2 Center Drilled holes in each end .It has been Turned, Ground & polished to 2-3/4 OD 2.7500...I am a Machinet and made this shaft...S/H.. $5.85