1 2 pressure relief valve for sale, brand-new and used.

1-1/4" WATTS MODEL 'M', NO. 740 BOILER PRESSURE RELIEF VALVES

1-1/2" WATTS MODEL 'M', NO. 740 BOILER PRESSURE RELIEF VALVES

We have 2 Kunkle Air/Gas Relief Valves left over from an incomplete project. These relief valves are unused, but appears that they were installed, then removed when the project was terminated. Specifications: Model 918DGFV01-KE: Connection Type=B - Male x Female NPT Orifice= G - Bronze, 2" Outlet Inlet Size=F - 1 1/4" (31.8 mm) Seat/Seal Material=V - Viton Variation=01 - Threaded cap Valve Service=K - Air/Gas Spring Material=E - Stainless Steel Set Pressure= 200 psig

SWAGELOK SS-4R3A5 NE-R3A-K2 177-R3A-K1-C The listing is for one Swagelok high pressure relief valve, a seal kit and a 750-1500 psi spring. All items are new and sealed. If you select first class mail for shipping, the items will be sent in a padded envelope.

Description This pump designed for engines with a 3/4" diameter, straight (non-tapered) horizontal shaft. Mounting bolt holes are 2-5/8" between centers (Can also be measured as 2-9/16", either will work). Includes thermal release valve.

5332T-4PP, 5300 Series Relief Valves 400 to 10500 psig 5332T-4PP-2755 RELIEF VALVE GN6 Features Zero leakage up to 95% of cracking pressure No chatter or squeal Positive reseal at a high percentage of cracking pressure No pressure rise with increasing flow Externally adjustable PED certifications and CE marking available for most models Note: Proper filtration is recommended to prevent damage to sealing surfaces.

Watson McDaniel. Back Pressure Regulator 3040 Series. 1-1/2" NPT Thread Back pressure relief valve suitable for air, water, oil or other liquids up to 300 F degrees (Viton Diaphragm).

var itemNumber = window.ebayItemID ?

These are used. They were working when removed. MSRP when new $241 Description

Another first from The Sausage Maker - a stainless steel 5 lb Sausage Stuffer for home use - no rust - ever! The streamlined design of this vertical sausage stuffer saves valuable counter space while allowing you to stuff sausages with a minimal amount of exertion. It comes equipped with a stainless steel pressure relief valve built into the piston head to prevent blowouts during stuffing.

A stainless steel 5 lb Sausage Stuffer for home use - no rust - ever! The streamlined design of this vertical sausage stuffer saves valuable counter space while allowing you to stuff sausages with a minimal amount of exertion. It comes equipped with a stainless steel pressure relief valve built into the piston head to prevent blowouts during stuffing.

New unused Spence / Watts Safety Relief Valve, 1 X 1-1/4 In, 150 Psi 041afea-150 Grainger 1rwy3 http://www.grainger.com/product/1RWY3 Safety Relief Valve, Body Material Bronze Inlet Type Fnpt, Outlet Type Mnpt, Inlet Size 1 In., Outlet Size 1-1/4 In., Factory Set Pressure 150 Psi, Pressure Range 10 To 250 Psi, Disc Material Bronze, Overall Height 9 In., Application Pressure Reducing Station

Never used, box opened to check contents. Box is a little worn, some dust on the pump. LMI Series J5 Metering Pump, 0.42 GPH @ 140 PSI, 12 Volt DC LMI Series J5 Metering Pump (12 VDC).

Watts Valves 1-1/2" ASME Hot Water

All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item.