These are the leveling jacks for the Albion dual 3500 lb capacity casters I have on another listing.304 stainless with locking nut. Acme thread. 10,000 year guarantee:-).Works for 1-1/2 scaffolding as well.
New! Designed to coordinate with other accessories in the Bobrick Cubicle collection, the Bobrick B-542 Cubicle Collection Coat Hook is an attractive way to offer a hanging space to keep outerwear off of the floor and out of the way. The hook pin is 1/4 of an inch in diameter and 1/2 of an inch in height and is attached to the hook's post with an included thread screw.
BIMBA MRS-041-DXDE AIR CYLINDER In Original Packaging 1" Stroke, Double Acting, Double End, 1/8" NPT Threaded Ports, 304 Stainless Steel Body, Anodized Aluminum End Plates, 1/2"-20 Mounting Threads at Both Ends, 5/16" diameter Stainless Piston Rod with 1/4"-28 Threaded Ends, Length Dimensions Available @
NEW BIMBA 2" STROKE DOUBLE WALL AIR CYLINDER 2" BORE DW-312-2 This is a Brand New Pneumatic Bimba Double Acting Double Wall with 2 inches of stroke 5/8" piston threaded on the end, Model DW-312-2. FEATURES Tie Tube: Epoxy coated Aluminum Cylinder Body: Smooth 304 stainless steel Piston Rod: Hard Chrome Plated Pressure Rating: 200 psi Life: 1400 miles of travel when lubricated For more information see: http://www.bimba.com/Global/Library/Catalogs/Bimba%20Catalogs/FL_DoubleWallRSS.p
This auction is for 1 Standard 6" Billet aluminum Machined vise stop. (DIMENSIONS FOR FITMENT) This vise is designed to mount onto the back of a 6" standard vise. This means brands like KURT, GLACERN, and any other standard 6" vise with 3.875" spacing from center to center of holes, and uses a 1/2-13 thread.
New billet aluminum replacement rear clamp block for your Delta Unisaw fence This is a replacement clamp block for the rear of the early style Unisaw fence. The early style fence is shown in photo #2. This fence is identified by the presence of the small rear clamp tighening knob above the lever lock at the operator side
Hello, you are looking at a beautiful Synthes combined Reamer System and Nail Extraction System consisting of the following 45+ instruments and accessories. Details: 20ea. Synthes Reamer heads size 9.5mm to 19mm in organizational rack
Kerick Valve MA052 PVC Mini Float Tank Mount Adjustable Arm 1.5 gpm 60 psi Male Product Details: This Kerick MA052 float valve is a tank-mount style with an adjustable arm, and is made of PVC with 18-8 stainless steel hardware. The valve has a 0.093" orifice and its estimated rate of flow is 1.3 gallons per minute (gpm) at 40 pounds per square inch (psi) and 1.5 gpm at 60 psi.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
