KLOCKNER MOELLER MANUAL MAGNETIC MOTOR PROTECTOR PKZM 3-4 This is an Auction for a Klockner Moeller Motor Protector Device, No. PKZM 3-4-U-NA. The PKZM is a 3 phase thermal magnetic motor protective device incorporating adjustable bimetal trips for motor overload protection and magnetic trips to de-energize the motor circuit in case of a short circuit.
This motor set up came off a reverse osmosis water purification system tested and working I pulled it whole complete with Dayton 115 v 1/3 hp split phase pump motor with TEEL vane rotary pump 3P754 COMPLETE WITH FURNAS PRESSURE CONTROL AND ALL ELECTRIC POWER CORDS IN TACT ANY QUESTIONS PLEASE ASK
Brand new Electric motor TECO-Westinghouse. HP: 1/2 Volts : 575 3 phases RPM: 3450 HZ: 60 Fr: 56 Cat no: ZA.501TE5 Type : AEFAZA Enclosure : TEFC This is a low weight motor, all in alluminium whit removal base. You can change the base position to put the conduit box on the right or the left side of the motor.
up for bid is a older working motor 3/4 Hp,, rpm 3450,,4.6 amps ,,60 cycle 110/230 volts it is CC rotation looking at pulley 2 1/2 stone is 5 1/2 " motor run in both dirictions depending on how you jump start some surface rust run fine once started,, 5/8 shaft shipping based on 50lbs packed Thanks Good Luck
SAMUSCO ECS225P START RELAY FOR USE ON .50 TO 6 HP 1 PHASE 230 VOLTS CAPACITOR START-CAPACITOR RUN ELECTRIC MOTORS/PUMPS. THIS RELAY CAN BE USED ON 7.5 HP ELECTRIC MOTORS AND PUMPS IF THE AMPS DO NOT EXCEED 25. NOTE: THIS RELAY IS GREAT TO USE IN SIMPLEX AND DUPLEX GRINDER PUMP STATIONS 1PH 208 OR 230 VOLT OPERATION.
Selling a new-in-box General Electric 5KH32HN5461T 1/3 hp, 1725 rpm, 48Y frame, single phase, 115 volt motor. Carrier Bryant number P267-9308. Shaft is 1/2" x 1.5".
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.