1 4 aluminum angle for sale, brand-new and used.

Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.

Genuine U.S. Military Issue Surplus   Aluminum Angle Plate / Bracket P/N: EE45557 The overall length is 12 1/2" 3" Wide 3/32" Thick (Approximately) The aluminum plate is 5" then it goes at an angle for 3" then it bends and is another 5 1/4" in length. On the 5" length there are two holes they are 3/16" Inner Diameter Weight: 5 oz Similar to the one in the pictures.

New Metal grinder wheel for cutting all ferrous metals and stainless steel 40 grit Tough aluminum oxide abrasive is continuously exposed during use to maintain an aggressive cutting edge Fully reinforced with fiberglass mesh for added safety and controlled performance

This auction is for 1 brand new, never used, thin type 1/16" profile, 4 1/2" diameter, genuine aluminum oxide construction, high speed (13,300rpm), 40 grit metal grinding cut-off wheel for hard iron or stainless steel. All cut-off wheels are not created equal!

Aluminum Angle 1.25 x 1.25 x 48 in, 1/16 in thick, NEW!, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 1.25 x 1.25 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, and sometimes from our truck.

Description – Bunch or random Flat and Angles mixed in. Nothing is wider than 1.5in. Don't ask us all the sizes because we won't know.

Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.

Aluminum Angle 1 x 1 x 48 in, 1/4 in thick, 6061, Structural, NEW! Description –They measure 1 x 1 x 48in x 1/4in thick. They are easy to work with and are a 6061 type aluminum.

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.

Aluminum Angle 3/8 x 3/8 x 48 in, 1/16 in thick, NEW! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/8 x 3/8 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, FL, and sometimes from our truck.

Aluminum Angle 1-1/2” x 1-1/2” x 21.5 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – These are left over from a project. The length varies from 21.5 to 22in long.

Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.

Aluminum Angle 1/2 ” x 1/2 ” x 24 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.

Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength Description – This angle is a higher strength / anodized version of our popular 3/4in aluminum angle. Almost everything about it is better. It is substantially higher strength, higher corrosion resistance, and lighter weight.

Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.

Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.

Aluminum Angle 5/8” x 5/8” x 48 in, 1/16 in thick, 5/8 IN x 5/8 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.

Aluminum Offset Angle 1” x 2” x 48 in, 1/16 in thick, 1 IN x 2 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.

Aluminum Angle 2” x 2” x 48 in, 1/16 in thick, 2 x 2 in, NEW!, Angles Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick. They measure 2 x 2 x 48 inch.

For pricing or shipping discounts, combination orders, volume discounts, purchasing over the phone, or general information please call me on my cell at: (six, seven, eight,)-(two, zero, zero)-(zero, eight, six, two). Aluminum Angle 1/2 ” x 1/2 ” x 48 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – When