+ Post new Ad
1-Powers Fasteners Carbide Fast Spiral Drill 1/2" x 6" shank-3/8" Part# 08520, US $8.75 – Picture 0
1-Powers Fasteners Carbide Fast Spiral Drill 1/2" x 6" shank-3/8" Part# 08520, US $8.75 – Picture 1
1-Powers Fasteners Carbide Fast Spiral Drill 1/2" x 6" shank-3/8" Part# 08520, US $8.75 – Picture 2
1-Powers Fasteners Carbide Fast Spiral Drill 1/2" x 6" shank-3/8" Part# 08520, US $8.75 – Picture 0
1-Powers Fasteners Carbide Fast Spiral Drill 1/2" x 6" shank-3/8" Part# 08520, US $8.75 – Picture 1
1-Powers Fasteners Carbide Fast Spiral Drill 1/2" x 6" shank-3/8" Part# 08520, US $8.75 – Picture 2

1-powers Fasteners Carbide Fast Spiral Drill 1/2" X 6" Shank-3/8" Part# 08520

US $8.75

  • Staten Island, New York, United States
  • Jan 30th
Open on mobile:
QR code
1-Powers Fasteners Carbide Fast Spiral Drill 1/2" x 6" shank-3/8"  Part# 08520(Box shown for display purposes only) Rotary Carbide Drills Rotary Carbide Bits are designed for use in a rotation only drill equipped with a 3 jaw Jacobs type chuck. The bits meet ANSI standards with a positive rake tip and can be used to drill in soft or brittle masonry materials using rotation only. Fast spiral flutes are for fast drilling in soft to medium masonry materials such as block or brick. Deep fluted drills perform best in concrete where the wide fluting helps clean concrete chips and dust from the hole.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model 08250
MPN 0321
Brand Powers Fasteners

Directions

Similar products from Drill Bits & Sets

HILTI 293472 TE-YX 3/4-13 CARBIDE DRILL BIT - CONCRETE - NEW

HILTI 293472 TE-YX 3/4-13 CARBIDE DRILL BIT - CONCRETE - NEW

  • Kansas City, Missouri, United States
  • Jan 30th
Bell Hanger Bit 3/8" x 11 5/8" Twist x 17 1/2" - Carbide Tip

Bell Hanger Bit 3/8" x 11 5/8" Twist x 17 1/2" - Carbide Tip

  • Chillicothe, Missouri, United States
  • Jan 30th
Sheet Metal Hole Saw- Set of 2

Sheet Metal Hole Saw- Set of 2

  • San Diego, California, United States
  • Jan 30th
Ideal 35-825, 7/8" x 17" Nail Biter Auger Bit

Ideal 35-825, 7/8" x 17" Nail Biter Auger Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
Precision Twist Drill Pack Of 12 High Speed Drill Bits 3/64 R10 10003

Precision Twist Drill Pack Of 12 High Speed Drill Bits 3/64 R10 10003

  • Dayton, Ohio, United States
  • Jan 30th
Lot of 8 Vintage Irwin Speedbor 88 Plus Electric Drill Wood Bits New Red Pouch

Lot of 8 Vintage Irwin Speedbor 88 Plus Electric Drill Wood Bits New Red Pouch

  • Hinton, Virginia, United States
  • Jan 30th
MILWAUKEE #48-25-1371 ( 1-3/8") MULTI-SPUR "SELFEED" MACHINE BIT

MILWAUKEE #48-25-1371 ( 1-3/8") MULTI-SPUR "SELFEED" MACHINE BIT

  • Chicopee, Massachusetts, United States
  • Jan 30th
New 12 Pack Double Sided Sheet Metal 55125 Drill Bits 1/8" Johnstone H24-566

New 12 Pack Double Sided Sheet Metal 55125 Drill Bits 1/8" Johnstone H24-566

  • Mishawaka, Indiana, United States
  • Jan 30th
Precision Twist Pack Of 12 Tanged Drill Bits 11/64 R09 51911

Precision Twist Pack Of 12 Tanged Drill Bits 11/64 R09 51911

  • Dayton, Ohio, United States
  • Jan 30th
Fastenal 15/16 drill bit HD SUPER PREMIUM

Fastenal 15/16 drill bit HD SUPER PREMIUM

  • Boise, Idaho, United States
  • Jan 30th
General Tools & Instruments 195-3/4 , 3/4' Countersink Bit HS NEW

General Tools & Instruments 195-3/4 , 3/4' Countersink Bit HS NEW

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Vermont Precision Tools, A-Z HSS Drill Blank Set !57B!

Vermont Precision Tools, A-Z HSS Drill Blank Set !57B!

  • Saint Louis, Missouri, United States
  • Jan 30th
(2) Mueller 3/4" and 1" Drilling Taps Bits 75825 and 75826 Steel

(2) Mueller 3/4" and 1" Drilling Taps Bits 75825 and 75826 Steel

  • Ardmore, Oklahoma, United States
  • Jan 30th
Irwin, 13/16" Ship Auger Bit

Irwin, 13/16" Ship Auger Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
Lot of 27 Guhring Milling Lathe Drill Bits

Lot of 27 Guhring Milling Lathe Drill Bits

  • Bridgeview, Illinois, United States
  • Jan 30th
Lot Of 12 Cleveland C23700 HSS #40 6" Extension Drills Black Oxide NEW CherryMax

Lot Of 12 Cleveland C23700 HSS #40 6" Extension Drills Black Oxide NEW CherryMax

  • Jasper, Georgia, United States
  • Jan 30th
Set Perceuse 6PC Industrielle Verre, Carreaux Ceraminques Mirroir Rangement

Set Perceuse 6PC Industrielle Verre, Carreaux Ceraminques Mirroir Rangement

  • Devizes, Wiltshire, United Kingdom
  • Jan 30th
PTD 1" SS DRILL BIT

PTD 1" SS DRILL BIT

  • Wadley, Alabama, United States
  • Jan 30th
LOT 30 NEW ASSORTED USA IMPERIAL DRILL BIT 7/32 11/64 12 GAUGE D315124

LOT 30 NEW ASSORTED USA IMPERIAL DRILL BIT 7/32 11/64 12 GAUGE D315124

  • Delta, Ohio, United States
  • Jan 30th
PERFORMANCE TOOL 6 PIECE DRILL BIT SET HEX SHANK W8692

PERFORMANCE TOOL 6 PIECE DRILL BIT SET HEX SHANK W8692

  • Tacoma, Washington, United States
  • Jan 30th

People who viewed this item also vieved

Shopsmith 10-ER Dealer Sales Brochure Catalog Accessories Saw Drill Lathe Sander

Shopsmith 10-ER Dealer Sales Brochure Catalog Accessories Saw Drill Lathe Sander

  • Utica, Michigan, United States
  • May 24th
Shopsmith Model A-34 Jigsaw Owners Guide Manual Parts Catalog Assembly Operation

Shopsmith Model A-34 Jigsaw Owners Guide Manual Parts Catalog Assembly Operation

  • Utica, Michigan, United States
  • May 24th
Foley-Belsaw Institute Computer Repair Program Skill Pack 1-6

Foley-Belsaw Institute Computer Repair Program Skill Pack 1-6

  • Panama City, Florida, United States
  • May 24th
Vacuum clamp

Vacuum clamp

  • Gravette, Arkansas, United States
  • May 30th
Collins Tool Miter Spring Clamps Woodworking Framing Corners Clamps (12 Pack)

Collins Tool Miter Spring Clamps Woodworking Framing Corners Clamps (12 Pack)

  • Laguna Hills, California, United States
  • May 30th
MINI BENCH VISE 2" WITH CLAMP JEWELRY MAKING BEADING TOOL, ELECTRONICS

MINI BENCH VISE 2" WITH CLAMP JEWELRY MAKING BEADING TOOL, ELECTRONICS

  • Miami, Florida, United States
  • May 30th
10pcs 3.175*17mm two straight flutes CNC router bits PVC, acryl, plywood

10pcs 3.175*17mm two straight flutes CNC router bits PVC, acryl, plywood

  • CN, China
  • Jun 1st
10pcs 3.175*32mm two straight flutes CNC router bits PVC, acryl, plywood

10pcs 3.175*32mm two straight flutes CNC router bits PVC, acryl, plywood

  • CN, China
  • Jun 1st
10pcs 3.175*28mm two straight flutes CNC router bits PVC, acryl, plywood

10pcs 3.175*28mm two straight flutes CNC router bits PVC, acryl, plywood

  • CN, China
  • Jun 1st
Wood Veneer Recon Maple 46x96 1 Piece Wood Backed "EXOTIC" 36A 47

Wood Veneer Recon Maple 46x96 1 Piece Wood Backed "EXOTIC" 36A 47

  • Jeffersonville, Indiana, United States
  • Jun 6th
Wood Veneer Recon Walnut 49x84 1 Piece 20Mil Paper Backed "EXOTIC" 36A 35

Wood Veneer Recon Walnut 49x84 1 Piece 20Mil Paper Backed "EXOTIC" 36A 35

  • Jeffersonville, Indiana, United States
  • Jun 6th
Wood Veneer Recon Zebrawood 44x96 1 Piece 10Mil Paper Backed "EXOTIC" 36A 39

Wood Veneer Recon Zebrawood 44x96 1 Piece 10Mil Paper Backed "EXOTIC" 36A 39

  • Jeffersonville, Indiana, United States
  • Jun 6th
14" 80 tooth saw blade 1" bore Brand unknown

14" 80 tooth saw blade 1" bore Brand unknown

  • Newalla, Oklahoma, United States
  • Jun 7th
DCT (Special Projects) 2400.100N80 10 -Inch 80 Negative Hook Teeth Carbide

DCT (Special Projects) 2400.100N80 10 -Inch 80 Negative Hook Teeth Carbide

  • USA, United States
  • Jun 7th
MK Diamond 159401 MK-99 4-Inch Dry Cutting Continuous Rim Saw Blade with

MK Diamond 159401 MK-99 4-Inch Dry Cutting Continuous Rim Saw Blade with

  • USA, United States
  • Jun 7th
2" Doughnut Wheel "Round Face DW290 Red ExCoarse - Adapter included 1/4" shaft

2" Doughnut Wheel "Round Face DW290 Red ExCoarse - Adapter included 1/4" shaft

  • Iron River, Michigan, United States
  • Jun 7th
2" Doughnut Wheel "Round Face" DW270 Green Coarse - Adapter included 1/4" shaft

2" Doughnut Wheel "Round Face" DW270 Green Coarse - Adapter included 1/4" shaft

  • Iron River, Michigan, United States
  • Jun 7th
2" Doughnut Wheel "Round Face" DW250 Yellow Fine - Adapter included 1/4" shaft

2" Doughnut Wheel "Round Face" DW250 Yellow Fine - Adapter included 1/4" shaft

  • Iron River, Michigan, United States
  • Jun 7th
2-1/4" x 3" Drum Sander fits Shopsmith 5/8" Plain Spindle or 5/8" Motor Shaft

2-1/4" x 3" Drum Sander fits Shopsmith 5/8" Plain Spindle or 5/8" Motor Shaft

  • Jacksonville, Florida, United States
  • Jun 19th
Carbide-tiped classical O-G router bit, 1/2 inch shank

Carbide-tiped classical O-G router bit, 1/2 inch shank

  • Belleville, Wisconsin, United States
  • Jun 19th
Ryobi WDS1600 sander conveyor belt

Ryobi WDS1600 sander conveyor belt

  • Belleville, Wisconsin, United States
  • Jun 19th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies