round shank reamer for sale, brand-new and used.

This is an adjustable reamer that is missing the tapered pin inside that adjusts the size. It starts out cutting at 1.470" then it tapers up to 1.497" or maybe 1.498" at the largest point which is below the section that is adjustable so it will cut this size if you plunge for the full depth of cut. Item ......................

High-Speed-Steel Special Decimal Chucking Reamer

This reamer is on size Item ...................... Reamer Cutter

Alvord Polk 127-1 High-Speed Steel Chucking Reamer, Right Hand Spiral Flute, Round Shank, Uncoated Finish, Size: 1/2" Oversize:

Alvord Polk 127-0 High-Speed Steel Chucking Reamer Straight Flute Round The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder. Straight flute reamers are useful for uninterrupted cuts in general purpose applications.

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: #53 Wire Size The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms with reduced vibration and increased accuracy compared to a longer tool. Less vibration means more precision.

Alvord Polk 650-H High-Speed Steel Construction Reamer, Left Hand Spiral Flute, Round Shank, Uncoated Finish, Size: 3/8 Inch

Union Butterfield 4533 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright), 0.2490 inch

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Decimal Size: 0.2580"

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 inch Oversize

Alvord Polk 155-H High-Speed Steel Taper Pin Reamer, Left Hand Helical Flute, Round Shank, Uncoated Finish, Size Number: 2/0

Union Butterfield 4533 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright), 35/64 inch - 5010692 Straight flute for general-purpose reaming of uninterrupted cuts in through holes and blind holes High-speed steel is compatible with a variety of materials Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications 45-degree bevel at the cutting tip facilitates entry to a pre-drilled hole Round shank aids acc

Drill America DWRRADJ Series Qualtech High-Speed Steel Adjustable Hand Reamer, Straight Flute, Round with Square End Shank, Black Oxide Finish, C Size (Pack of 1)

Union Butterfield 4532 High-Speed Steel Expansion Chucking Reamer, Straight Flute, Morse Taper Shank, Uncoated (Bright), 1-1/8 inch

Alvord Polk 661-2 High-Speed Steel Repairman's Deburring Reamer, Left Hand Spiral Flute, Brace Shank, Uncoated Finish, 3/16 Inch Point Diameter, 1-1/4 Inch Large End Diameter

G-14-3si19 The item you are bidding for is Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank

Union Butterfield 4537 High-Speed Steel Chucking Reamer, Right Hand Spiral Flute, Taper Shank, Uncoated (Bright), 5/8 inch

Drill America DWRRB Series Qualtech High-Speed Steel Bridge Reamer, Spiral Flute, Round Shank, Uncoated (Bright) Finish, 13/16" Size (Pack of 1)