1 to 3/4 reducer for sale, brand-new and used.

UP FOR SALE A SPEED REDUCER , HERE ARE THE SPECS : Speed Reducer Type C-Face Shaft Orientation Right Angle Duty Washdown Input RPM 1725 Nominal Output RPM 86 Worm Center Distance 2.00" Bore Dia. 1-7/16" Frame 56C/140TC Overhung Load 1345 lb. Nominal R

CPV 64T-3 304/SS-H095 Hose Pip Tube Railing Fitting Flange U.S. Navy Reducer 1 & 5/8 inch threaded male fitting on one end that has a small 3/4 inch female fitting on the other end. The length of this entire piece is 1 and 1/2 inches front to back.

Hello! Welcome Here! This fixed price auction is for a UHV 4.5" to 6" 2 3/4" Conflat Del-Seal Conical Reducer Nipple

This bid is for a heavy Western Gear Works 41 to 1 ratio reducer. 3/4" in and 1 1/4" shaft out. Measures 9" tall, base measures 6 1/4" by 5".

Steinel 07081 Reducer Condition: New Manufacturer: Steinel Part Number: 07081 The Steinel reducer is sold 1 per pack and is another quality product from Steinel. This reducer is designed to work with Professional Heat Gun. Product Features Brand: Steinel

Panduit PISR1/0-1 In-Line Splicer/Reducer, Clear Insulation, 1/0 AWG STR - #14 AWG STR/#8 AWG SOL - #14 AWG SOL Conductor Size Range, 0.95" Width, 1.41" Height, 2.91" Length

PLANETGEAR SPEED REDUCER #520944D TAG DAMAGED EBAB0044BH1562 USED

Buy With 100% Confidence Fast Shipping !! Brand New!!

Dorian Tool Type B Split Style Chromium Molybdenum Alloy Steel Reducer Bushing, 2-1/4" Overall Length, 3/8" ID, 1-1/4" OD

You are buying a new vintage Washington Scientific miniature speed reducer in its original packaging. It is P/N 1008-227-054 which looks like an old nsn numbering system. It also has B571-227-054 on the packaging tag.

50:1 speed reducer for a frame 56C motor. It was attached to a 1\6 hp 1725 RPM Motor, it pulled less than 3 amps in the picture attached. (Motor is not included) It has some oil weeping from a side that I replaced a 1\4-20 hex screw that was missing.

Pulley / Sheave Reducer Sleeve to reduce a 3/4" Bore Pulley, gear, sprocket, wheels,etc. to fit a Small Gas Engine / Motor with a 1/2" Shaft with a 3/16" Keyway slot Length is 3"

All around the world people want to know how a single unit, like PulleyMan, can have all the functions of a winch, lift, and a hoist? How PulleyMan can run along a fixed