1/4 x 4 copper bus bar for sale, brand-new and used.

Used solid copper bus bar. 1/4" x 1 1/4" x 26"

PLEASE READ THIS ENTIRE AUCTION BEFORE BUYING. THANK YOU. :)

SOLID COPPER BUS BAR - FLAT - Measures 33" Long x 1/4" Thick x 4" Wide . It Does Have The Existing Mounting Holes As Pictured. Ask For More Details If You Need, Prior To Bidding.

THIS WAS REMOVED FROM AN EATON'S CUTLER-HAMMER POWER BOX STATIONTHIS IS BEING SOLD AS A SET OF 4, OFFSET AND ANGLED COPPER BUS BARS, WEIGHT AND MEASUREMENTS ARE APPROX. AND LISTED BELOW. THEY ARE COATED WITH A SILVER COLORED MATERIAL.EACH PIECE WEIGHS 1 lb.

THIS WAS REMOVED FROM AN EATON'S CUTLER-HAMMER POWER BOX STATIONTHIS IS BEING SOLD AS A SET OF 4, OFFSET AND ANGLED COPPER BUS BARS, WEIGHT AND MEASUREMENTS ARE APPROX. AND LISTED BELOW. THEY ARE COATED WITH A SILVER COLORED MATERIAL.EACH PIECE WEIGHS 11.8oz AND MEASURE APPROX.

COPPER BUS BAR from a 2000 Amp 600 Volt Panel That Only Housed A 2000A Breaker. This Busbar is solid copper It weighs approx 9 pounds. Measures 28 3/4" Long x 4" Wide x 1/4" Thick.

Shunt transducer for Bus Bar Used with a large industrial DC motor (5,000HP). The 5,000HP motor was recently replaced with a 6,500HP making these shunts unusable for the 6,500HP motor application They work perfectly and were just in service a few months ago. The shunt measures 15"L x 6"W x 3.5"D The bolt holes are 5/8" dia and the bolt area is 6" x 2.5" There are (5) 1/4" thick copper plates on each side to bolt to your bus.

TIN PLATED COPPER GROUND BUS BAR 9 3/4" X 7" X 1 1/4" Silver Tin PlatedSTAMPED JTP2975 Buy with confidence! Quality Guarantee - Buyer has 14 days after receiving the item to return it for: money back. Buyer pays for shipping.

Universal 4" x 12" X 1/4" solid copper ground bar. Includes 23 pairs of 7/16" pre-drilled universal lug holes. Tinned version, mounting hardware not included.

Universal 4" x 12" X 1/4" solid copper ground bar. Includes 23 pairs of 7/16" pre-drilled universal lug holes. Tinned version, mounting hardware not included.

Universal 2" x 10" x 1/4" solid copper ground bar. Includes 10 pairs of 7/16" pre-drilled universal lug holes. Tinned version, mounting hardware not included.

Wireless Solutions - Universal Groundbar (2"x10") w/ shelter hardware Universal 2" x 10" x 1/4" solid copper ground bar. Includes 10 pairs of 7/16" pre-drilled universal lug holes. Incl insulated shelter mounting hardware.

Universal 2" x 10" x 1/4" solid copper ground bar. Includes 10 pairs of 7/16" pre-drilled universal lug holes. Description Includes insulated tower mounting hardware.

You are buying 4 pieces of 1/4"x 1-1/2" C110 Copper Solid Flat Bar 14" long. Material: Copper (CU) Alloy: C110 (99% CU) Size: .250"x 1.5" Cut tolerance -0/+.07" Weight per foot: 1.458 lb

You are buying 1 piece of 1/4"x 1-1/2" C110 Copper Solid Flat Bar 14" long. Material: Copper (CU) Alloy: C110 (99% CU) Size: .250"x 1.5" Cut tolerance -0/+.07" Weight per foot: 1.458 lb

( 1 ) piece of .25 thick Copper plate. Unknown alloy and hardness. 10 lbs total weight square cut about 12" x 12" Other sizes available by request.

Brand new never installed Ground bar. Universal Hole spacing for use with 3/8" hardware. Wall mounting brackets and insulating bushings to isolate the bus bar.