1/5 bend for sale, brand-new and used.

Iwiss RB-16 Electric Hydraulic Rebar Bender For Bending Up To 16 mm Product Description

New Truck-mount 12" 2-Jet Carpet Cleaning Wand .... Can be used with portable extractors as well 1.5 Vacuum Tube (Single bend) 1200 PSI (Rated) Brass Valve - with soft pull trigger Stainless steel solution line Comfort Grip Handle Splash guard Fast Shipping!

eBay Template v2.5

Mittler Brothers 5" inch Radius Bend Protractor 2100-5 These high quality bend protractors will help you duplicate bends that are found in existing parts. They are available for five different radii and can be used as a template for one off parts. They read degree of bend and also the length of tubing in the bend being

Mittler Brothers 8" inch Radius Bend Protractor 2100-8 These high quality bend protractors will help you duplicate bends that are found in existing parts. They are available for five different radii and can be used as a template for one off parts. They read degree of bend and also the length of tubing in the bend being measured.

Mittler Brothers Complete Bend Protractor Set 2100 Includes 4, 5, 6, 7, and 8 inch radius. These high quality bend protractors will help you duplicate bends that are found in exi

Mittler Brothers 4" inch Radius Bend Protractor 2100-4 These high quality bend protractors will help you duplicate bends that are found in existing parts. They are available for five different radii and can be used as a template for one off parts. They read degree of bend and also the length of tubing in the bend being

Mittler Brothers 7" inch Radius Bend Protractor 2100-7 These high quality bend protractors will help you duplicate bends that are found in existing parts. They are available for five different radii and can be used as a template for one off parts. They read degree of bend and also the length of tubing in the bend being m

Up for sale is this South Bend 4.5" rotary table. This table is model RTB-100 and is very high quality. The table and markings are in perfect condition.

Excellent Condition - Original South Bend Lathe 5" 3 jaw scroll chuck with key. Thread mounting diameter is 1 1/2" x 8 TPI, threads are in very fine order. Chuck is 2 1/8" thick.

Custom made, reproduction face plate with 5/16"-18 tapped holes and 7/16" wide slots. 2-1/4"-8 threaded mount. Shown on a South Bend Heavy 10" lathe.

Brand new in the box. Custom made Tools4cheap face plate with 5/16"-18 tapped holes and 7/16" wide slots. 1-1/2"-8 threaded mount.

This is a newly machined 47/37 transposing gear set which converts your 8 TPI lead screw to a 2.5 mm pitch. The thread’s crest-to-crest or lead error is only 0.02% or about 0.0025 inch for a one-foot long threaded rod. The transposing gears are under 3 inches in diameter leaving lots of room for closing the gear cover.

COIL WINDER SET UP ON SOUTH BEND METAL LATHE MODEL A WINDS COILS ON MICA CORES This coil winder is set up on a South Bend Model A Metal Lathe. It is used to wind coils on mica cores. This machine came from a manufacturer who primarily made heating elements for stoves etc.

Brand New 13" Laminator Four Rollers Hot Roll Laminating Machine 220 V 50 Hz--Model 8350 Attention: This machine is only for 220 V, if you need 110 V, you need to buy a voltage transformer in addition.

High  Speed Hot Cold Roll Laminator Kit You can use the roll  laminators for hot laminating and Cold laminating. The laminators have  different temperature settings, depending upon the projects whic

???? 1 Note:  You are bidding a 220V laminator machine only, no film inside.

???? 1 Note: The one  in the video is a A3 size machine, what you are bidding here is a A2  size.