1/5 hp condenser fan motor for sale, brand-new and used.

FASCO 1/4 HP CONDENSER FAN BLOWER HVAC 208-230 VOLT 2.1 AMP MOTOR 20" BLADE NEW Up for your consideration is a used FASCO 1/4 HP, 208-230 volt, 2.1 amp, 60Hz, 1075 RPM HVAC motor with a 20" fan blade included. The motor is in excellent physical shape with a 20" square 4 bladed LAU fan attached. The blade P/N is 605587-01, the pitch is 27 CW, and the maximum RPMs is 1140.

UP FOR GRABS IS A CONDENSER MOTOR FOR A HUSSMANN UNIT. CAN BE USED FOR ANY AIR OVER CONDENSER FAN MOTOR. BALL BEARINGS FOR ANY POSITION OPERATION.

Emerson Condenser Fan Motor 1875 (REPLACES S89-128) Description: Replaces motors in units by Carrier/Bryant and others 60°C ambient, thermally protected Flat end bell on lead end Extended studs 30" leads, drain holes both ends A: 5-1/16"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 60; Bearing Type: SAB; Capacitor to Match: G21-933; Diameter: 5-5/8"; Efficiency: 67.7%; Enclosure: TEAO; F/L Amps: 2.4; HP: 1/3; Hz: 60; Insulation Class: B; Mfg.

up for sale motor ,here are the specs : Motor Application

Century 9723 Multi Fit 3RCR5 2.0A 1075RPM 1/4-1/5-1/6HP Condenser Fan Motor AO Smith/Century Multifit™ Condenser Fan Motors

145459 New In Box, Dayton 4M207J Condenser Fan Motor 1/2 HP 20-230V 1075RPM, 3.5-4.0 Amps, 60Hz, Frame: 48YZ, Enclosure: TEAO, Shaft: 1/2" OD x 5-7/8" Long ( 5.50 DbL Flat) . Item is New, unused, in factory packaging that may have been opened.. Austin Surplus SKU: 145459 Location: GRG-R16-P16-S06-0005460

Kinetic Solutions Inc. Industrial Controls Distributor Phone: 610-853-3683

UP FOR SALE CONDENSER FAN MOTOR , HERE ARE THE SPECS : Motor Type PSC

YOU ARE BIDDING ON A MOTOR WITH THE FOLLOWING SPECS : Motor Type PSC Enclosure Open Air-Over HP 1/2 Number of Speeds 1 Na

you are bidding on Condenser Fan Motor, PSC, 1/2 HP, Nameplate RPM 1075, Voltage 208-230/460, 56Z Frame, Open DripproofFull Load Amps 3.2-3.0/1.5, Ring/Stud Mounting, Auto Thermal Protection, Insulation Class B, Service Factor 1.0, Double Shielded Ball Bearings, Max. Ambient Temp. 40 Degrees C, CW/CCW Rotation, Overall Length 13-11/16 In., Shaft Dia.

YOU ARE BIDDING ON Condenser Fan Motor, Permanent Split Capacitor, Open Dripproof, 1/2 HP, Nameplate RPM 1075, NEMA/IEC Frame 56Z, Voltage 208-230/460, 60 Hz, Full Load Amps 3.2-3.0/1.5, Ring/Stud Mounting, Auto Thermal Protection, Insulation Class B, Service Factor 1.0, Double-shielded Ball Bearings, Ambient 40 C, CW/CCW Rotation, Length Less Shaft 7 11/16 In, Shaft Dia 5/8 In, Shaft Length 6 In, Resilient Ring Dia 2 1/4 In, Ring to Ring Center 7 7/32 In

UP FOR SALE MOTOR , HERE ARE THE SPECS : Item

UP FOR SALE HVAC ELECTRIC MOTOR , HERE ARE THE SPECS :

Condenser Fan Motor, PSC, 1/2 HP, Nameplate RPM 1075, Voltage 200-230/460, 48Y Frame, Open Air-Over, Number of Speeds 1, Full Load Amps 4.6-4.6/2.3, Lug Mounting, Auto Thermal Protection, Insulation Class B, Service Factor 1.0, Ball Bearings, Max. Ambient Temp. 60 Degrees C, CW/CCW Rotation, Overall Length 9-3/4 In., Shaft Dia.

UP FOR SALE MOTOR , HERE ARE THE SPECS : Motor ApplicationFans

This motor was bought for my outdoor condensing unit fan which was part of my AC system. It was sold to me and installed by my HVAC mechanic. It turned out that that was not the problem with the system and the old motor was just fine.

THIS LISTING IS FOR A NEW PACKARD LUG /PSC MOTOR. SPECS: - 1/5 HP - 1050 RPM - SINGLE SPEED - 115 V - REQUIRES A 10MFD 370VAC CAPACITOR - SLEEVE BEARING DISCLAIMER: - ALL SALES ARE FINAL. NO RETURNS ACCEPTED - NEW PRODUCT SOLD "AS IS".

HP: 1.5; Volts: 460/200-230; Amps: 2.6/5.4-5.2;HZ: 60; RPM: 1140

Three-Phase Condenser Fan Motors Continuous Duty, Air Over, Reversible A: 10-1/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 60; Bearing Type: Dbl-Sld Ball; Efficiency: 75.0%; Efficiency Level: STD; Enclosure: OAO; F/L Amps: 5.30; HP: 1; Hz: 60; Insulation Class: B; Mfg. #: H667; Mounting: Thru-bolt/Belly band; NEMA Frame: 56Y; Phase: Three; RPM: 1140; Service Factor: 1.00; Shaft Diam.: 5/8"; Shaft Length: 6"; Std.

Check out this incredible bargain! Commercial rated 1/2 HP condenser fan motor, 480 V, ball bearing, rigid mount base. Motor has 5/8" x 4.25" shaft, 56HZ frame.