7GHz Transmit TX Module out of a microwave radio P/N 131-142069-103 8" x 3" x 3/4" thk It is working and come with a 14 day warranty. Shipping to the US is $6. $16 for the rest of the world.
7GHz Receiver out of a microwave radio P/N 131-142039-001 6" x 6" x 3/4" thk It is working and come with a 14 day warranty. Shipping to the US is $6. $16 for the rest of the world.
Please read carefully before bidding You are biding on WR90 Polarized conical Horn Antenna Frequency work range: 8-12 GHz In good condition TESTED GOOD see pictures #mc_embed_signup{background:#fff; clear:left; font:14px Helvetica,Arial,sans-serif; } /* Add your own MailCh
250MHz x1 x10 Oscilloscope Probe Elenco P-3E Built-in 3 Position Switch; X1; X10; Ref. Complete w/ Accessories Fits All Scopes w/ BNC Connector Compensation Range 10 to 35pF Length - 60 Features: Specifications: POSITION - X10 Attenuation Ratio 10:1 Bandwith DC to 250MHz Rise Time 1.4 nS Input Impedance 10M ohm when used with oscilloscopes with 1M ohm input Input Capacitance Approx.
Inspector USB Handheld Digital Radiation Alert® DetectorThe Inspector and Inspector Plus are now The Inspector USB!! Now with USB and the included Observer USB Software, you can download your data from the internal memory, set computer alarms, and calibrate your instrument!
Teltronics S-131, S-145 Portable Plug-In Sweep Generator Instruction Sheet w schematic Manuals in good used condition. 14 day right of return. General description: Teltronics S-131, S-145 P
The following description was found from internet sources believed to be reliable, however, seller makes no guaranty to its accuracy. All products are sold as-is. Agilent Technologies
Keysight/Agilent N9340B/PA3/TG3 Handheld Spectrum Analyzer, 100 kHz to 3 GHz with PreAmp The N9340B is in like-new condition and has been fully tested. This unit is offered with a 14 day right of return and a Agilent Factory Warranty until December 2017. New NIST Calibration available upon request.
Rental option as well for only 200$ a month. Also I can have the phase noise or spurious noise measurements installed on a free mass memory module before shipment for no extra cost! thats an 800 $ value !
this unit goes up to 26.9 ghz thanks to the option 26 it has installed which is a very valuable and high demand option. it increases the signal to noise ratio and gives it about 7 db lower noise floor past 22 ghz. and the amplitude accuracy is dead on with the option.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.